Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SFC scannow cannot repair problem..

09 Jun 2010   #1

Windows 7 x64bit Home Premium
 
 
SFC scannow cannot repair problem..

i am having problems with my system not wanting to boot up occasionally, when I finally achieved boot up I did a sfc scannow and got the following results: Windows Resource Protection had found corrupt files but was unable to fix some of them and the reference given was "C:\Windows\Logs\CBS\CBS.log".

I opened the cbs.log and went to the part that says cannot repair which is attached.
I have no idea what these means, I know that there is a way to extract files from the installation disc but I wouldn't know which ones.
Also I don't know if this is the problem that is making my pc not to boot up normally.

Anyone know what could I do in this case??

Thanks in advance you all..



Attached Files
File Type: txt Cannot repair part, cbs.log.txt (5.2 KB, 39 views)
My System SpecsSystem Spec
.

09 Jun 2010   #2
ryo

 
 

did you already try to Repair Install
My System SpecsSystem Spec
09 Jun 2010   #3

Windows 7 Ultimate x64, XP Mode, W8.1 Preview VM - 7 Pro x64 second remote tower
 
 

Try scheduling a run of the checkdisk utility with the "chkdsk /r /p" command. You may want to download and run the drive manufacturer's own hard drive diahnostics tool as well to see if you have any bad sectors now being seen.

You can also burn a repair tool cd with the automatic startup repair tool to see that will help correct any minor startup problems if not seen in the F8 boot options menu.
My System SpecsSystem Spec
.


09 Jun 2010   #4

Windows 7 x64bit Home Premium
 
 
yes

yes, Already did a startup repair and a repair install,

after i did the repair install I used sfc scannow and gave me the same report.

thanks


Quote   Quote: Originally Posted by ryo View Post
did you already try to Repair Install
My System SpecsSystem Spec
09 Jun 2010   #5
ryo

 
 

what is the error or warning??

give me a detail of your problem, because you just mention that's not work properly like before.
My System SpecsSystem Spec
09 Jun 2010   #6

Windows 7 x64bit Home Premium
 
 
ok

ok, i;ll try that tomorrow ,
thnks for quick response



Quote   Quote: Originally Posted by Night Hawk View Post
Try scheduling a run of the checkdisk utility with the "chkdsk /r /p" command. You may want to download and run the drive manufacturer's own hard drive diahnostics tool as well to see if you have any bad sectors now being seen.

You can also burn a repair tool cd with the automatic startup repair tool to see that will help correct any minor startup problems if not seen in the F8 boot options menu.
My System SpecsSystem Spec
09 Jun 2010   #7

Windows 7 x64bit Home Premium
 
 

This started when my pc did not sarted properly, giving me 1 long and 2 short beep codes and not being able to enter Bios or anything, (no signal to the black screen), after reseating video card and memory it will boot up normally.
Then the problem happpens again when I restart my computer, the same beep codes and showing "32" on the back of my MOBO (debug led).

I leave the computer alone for like an hour and i am able to boot up again normally, but when i restart the computer the problem reappears. Reseating video and memory no longer works, the only thing that works is letting the computer alone for 1 hour or more so i could turn it on properly.

On one of those normal bootings i took the oportunity to do a sfc scannow in command prompt so i could see if there is any corrupted system files that is causing my system to behave such way.

after doing this i wrote what i wrote at the beginning on this thread.

I am just wondering if this scannow results have anything to do with what is going on, If it does i would like to know how the hell I could read that cbs.log so I could know which files to replace with the installation disk.

If that's having anything to do with the start up problem then i am totally lost here.


that's it thanks....

Quote   Quote: Originally Posted by ryo View Post
what is the error or warning??

give me a detail of your problem, because you just mention that's not work properly like before.
My System SpecsSystem Spec
09 Jun 2010   #8
ryo

 
 

try like hawk suggest.
if that's still can't, i wonder that's cause into your memory, how much GB you put your memory.
My System SpecsSystem Spec
09 Jun 2010   #9

Windows 7 x64bit Home Premium
 
 

4 memory sticks of 2gb each= 8gb

Quote   Quote: Originally Posted by ryo View Post
try like hawk suggest.
if that's still can't, i wonder that's cause into your memory, how much GB you put your memory.
My System SpecsSystem Spec
09 Jun 2010   #10

Windows 7 Ultimate x64, XP Mode, W8.1 Preview VM - 7 Pro x64 second remote tower
 
 

If you have an Award - Phoenix bios on your board that one long two short beep code is indicating a hardware code not a software problem. 1 long 2 short is typically seen for video card failures as one of the main hardwares pointed to.

When you mention everything seems to be normal again after shutting down and letting the system sit for a period of time likely suggests the video card is overheating. You might want to check to see if the fan on the card itself is bound up with dust and not spinning or the fan simply gave out.

One suggestion here would be to go for the PC Wizard 2010 since that has been almost in 100% agreement with the hardware monitor on the board here for monitoring both video card temps as well as cpu temps. CPUID - System & hardware benchmark, monitoring, reporting

But whenever you hear more then a single beep at powering up that indicates a hardware problem in most cases. Another good one for video card temps alone is the TechPoweUp GPU-Z another freeware found at techPowerUp! :: Download TechPowerUp GPU-Z v0.4.2

This would be the first step to solving this one by montoring the present temps as well as you can while hearing the beep after a good reseat does suggest the card may be going bad on you there.
My System SpecsSystem Spec
Reply

 SFC scannow cannot repair problem..




Thread Tools



Similar help and support threads for2: SFC scannow cannot repair problem..
Thread Forum
sfc /scannow cannot repair explorer.exe Performance & Maintenance
Solved SFC /scannow can't repair autochk.exe Performance & Maintenance
SFC scannow cannot repair autochk.exe Performance & Maintenance
BSOD , when I : sfc / scannow cannot repair files BSOD Help and Support
Sfc/Scannow cannot repair corrupt .inf and .nlp files Performance & Maintenance
sfc scannow can't repair files Performance & Maintenance
SFC /scannow cannot repair catsrvut.dll Performance & Maintenance

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:47 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33