Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Intel Raid on Windows 7?

22 Jun 2010   #1

Windows 7 Professional 64
Intel Raid on Windows 7?


I was just installing a new hard drive, I went into the computer management screen to activate & format the new drive & I saw that my raid drives had one in "offline" mode.

I changed it to online mode, but it brings up a question. On XP i had an intel raid software that ran to tell me if the volume was healthy. On windows 7 64bit pro, how do I tell if the raid is working properly?

The raid is just for storage not my main system drive.


My System SpecsSystem Spec
22 Jun 2010   #2

Windows 7 Ultimate x64 SP1

You could install the Intel Matrix Storage app that shows you the status. It's been a long time since I ran RAID on a non-server, but that app should show your drives and their status. You'll need the chipset and RAID controller drivers installed first.
My System SpecsSystem Spec

 Intel Raid on Windows 7?

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Intel SSD 520 Series, RAID Question
What is best if I have 3 240GB Intel SSD 520 Raid 5 - Gives me ~480GB with some redundancy if an hd fails, costing some writing overhead Raid 0 - Gives ~720 GB but no redudancy Raid 0 + Hot Spare - Is there such a card? My motherboard has 2 Sata 6gb ports, so I will need a new Raid...
Hardware & Devices
Raid 0 Ssd intel 520 240gb
Should I setup two Ssd intel 520 240gb in raid 0 mode in order to extract maximum performance?
Hardware & Devices
RAID 1 recognized by Intel RST but can't be seen in my computer, fix?
Title basically explains it all. Followed the steps to create the RAID 1 array which some part/prgms of the computer recognizes. I read up about how you have to "initialize" the array for it to be seen. Is there any way around it? I have a 3tb RAID 1 and it is taking FORVER to initialize. any...
Hardware & Devices
How to completely clean the HDD has been installed Intel RAID?
I donít know whether I post this on right section or not. If not, please move. Hereís my problem. I have 3 WD 500G HDD, I configured them with RAID 5 before. But my PC broke, and it cannot power on. I got another PC and I want move 3 WD HDD to this from broke PC This new PC is no support RAID,...
General Discussion
Intel RAID Controller Driver - Windows 7 Ultimate x64
Hi Everyone, I've recently had some trouble installing a RAIDO disk configuration under Windows 7 Ultimate x64 (see my 3rd reply here I suspect that the drivers aren't quite Windows 7...
Intel RAID array rebuilding a lot
Running Windows 7 Professional 64-bit RTM (Software Assurance customer, was able to download on Aug. 8th) :D My RAID 10 array has rebuilt itself 4 or 5 times since installing Win 7 a week ago. I did a fresh install... did not upgrade from XP. It never did this under XP. Using the on-board...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 17:57.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App