Solved i can`t install windows 7-part 2First:thank you for the help. But now

First:thank you for the help.
But now I want just install my windows 7.I have tried these methods:
installing via usb drive-only blue desktop paper,no mouse cursor etc
installing via original dvd-only blue desktop paper
installing via newly burned DVD (copying from original DVD),only blue desktop paper


I have now 3 disks in my pc: samsung spinpoint 500gb hdd+2 samsung 1TB hdd.
I also make this:i have created new partition to first 1tb hdd ,it goes fine.Then I disconnected 500gb hdd and reboot. I got message “BOOTMGR is missing”.and secondary disk (1TB) message is “grub error 21”
I also use diskpart-but I cant still install windows 7-only blue desktop image.those 3 hdd`s are connected separate SATA cables.and here is my hardware specs:-if it helps


mobo gigabyte GA-EP-45-UD3LR bios ver.F11
ati hd4670 512mb graph card
4gb pc6400 800mhz RAM
500w psu
pioneer dvd writer
500gb samsung spinpoint hdd+2x1tb samsung spinpoint hdd 7200 rpm
22” samsung syncmaster t22
And most important:ONLY System repair disk works properly(windows 7 64 bit)




ps.now I erase those those two hdd`s with Active killdisk-if that helps
(d)

These will help
http://www.sevenforums.com/tutorials/91339-ssd-hdd-optimize-windows-reinstallation.html
http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html

When you say 'blue desktop paper' are we to assume you're talking about the dreaded Blue Screen Of Death?

Hello again.



I would try this to see the outcome; the first thing to do is disconnect all but one of the Hard Disk Drives (HDD) and use the info in this tutorial to do a complete wipe (secure erase) to the HDD and then create a single 100GB partition to install Windows 7 to, use the information in the snip of diskpart in Step Two # 2 to see how to do the steps to create the partition.

SSD / HDD : Optimize for Windows Reinstallation


Be sure to post back with any further questions you may have and to keep us informed.

So i want try that tutorial,thanks

Yes, you have 2 votes of confidence right here.

Orbital Shark said:

When you say 'blue desktop paper' are we to assume you're talking about the dreaded Blue Screen Of Death?

Click to expand...

No it is not BSOD-only dull blue desktop wallpaper-i think...

Bare Foot Kid said:

Hello again.



I would try this to see the outcome; the first thing to do is disconnect all but one of the Hard Disk Drives (HDD) and use the info in this tutorial to do a complete wipe (secure erase) to the HDD and then create a single 100GB partition to install Windows 7 to, use the information in the snip of diskpart in Step Two # 2 to see how to do the steps to create the partition.

SSD / HDD : Optimize for Windows Reinstallation


Be sure to post back with any further questions you may have and to keep us informed.

Click to expand...

Do this and post back with the out-come.

yes, and now something totally different.A theoretical question:My original install DVD,could it be corrupted-data on DVD???

Dont know about your case, but yes it could be corrupted, scratched etc.

mr bluesky said:

yes, and now something totally different.A theoretical question:My original install DVD,could it be corrupted-data on DVD???

Click to expand...

Yes there's a very good chance there is a problem with the original disk, can you create another, do you have the original files or is the 1 disk you have the only thing you have.

only message is:BOOTMGR is missing

http://www.sevenforums.com/tutorials/104341-bootmgr-missing-fix.html

Hope this helps

there is only this message:bootmgr is missing

richc46 said:

http://www.sevenforums.com/tutorials/104341-bootmgr-missing-fix.html

Hope this helps

Click to expand...

sorry -every time when i boot with new hdd.there is same message.yes my bios boot setting is:1st boot device-cdrom.no access to cd/dvd-no repair.no second or 3rd boot device

Bare Foot Kid said:

Hello again.



I would try this to see the outcome; the first thing to do is disconnect all but one of the Hard Disk Drives (HDD) and use the info in this tutorial to do a complete wipe (secure erase) to the HDD and then create a single 100GB partition to install Windows 7 to, use the information in the snip of diskpart in Step Two # 2 to see how to do the steps to create the partition.

SSD / HDD : Optimize for Windows Reinstallation


Be sure to post back with any further questions you may have and to keep us informed.

Click to expand...

You are supposed to do the "Clean all" on the Hard Disk Drive first Step One in this tutorial and then do a clean install.

Start the PC with the Windows installation disk in the CD Rom drive and at this screen hold the "Shift" key down and hit the F10 hot-key to get to diskpart so you can do the clean all first and then the installation.

Where did you get Win7? DId you burn it yourself? If so, check the ISO HASH using Hashtab against official HASH and then Verify DVD using ImgBurn against ISO file.

Now i have installed windows 7 to my new hdd.reason for troubles,i think, is hardware failure.my dvd burner stops working.i tell you later how can i installed my windows....

Good to see you have it installed and thanks for the update.