Type dism in a command prompt while running Windows 7 (just noticed your on xp). Don't ask me how to use it though. I haven't had time to play with it.
Probably the easiest method would be to try vLite but I don't know what success people have had integrating drivers. vLite was designed for Vista but it does work with Windows 7. Check over at msfn.org for vlite issues.
The last 2 options still require you to have WAIK installed!
Do you need to integrate them. as far as I know Win 7 and Vista and Raid drivers built it. and you don't need to install raid drivers except for in some cases.
Do you need to integrate them. as far as I know Win 7 and Vista and Raid drivers built it. and you don't need to install raid drivers except for in some cases.
I also used vLite and I noticed that windows 7 had nvidia and intel and a bunch of other raid drivers in it. I am not sure how updated they are but you can use vlite to get rid of those drivers and integrate the drivers you want by just loading up the drivers folder.
In fact that is what I did with my latest vlited 7227 installation. I downloaded the latest nvidia drivers for my motherboard and just integrated them.
My Computer
At a glance
Windows 7 x64 ProIntel 990XCORSAIR XMS3 6GB SDRAM DDR3 1600 (7-7-7-20)2 x BFG 285 GTX OCXs in SLI
I've installed Windows 7 on my Raid system and it didnt need any drivers or anything, when it asked where I wanted to intall the OS it showed the RAID0 drive that I had created through the RAID controllers bios config and it just went from there. I didn;t need to install any drivers and it ran perfectly after installation
My Computer
At a glance
OSX 10.7. Windows 7 Ultimate x64Intel Core i7 2.0Ghz8GB DDR3 1333MhzAMD Radeon HD 6490M 256MB
As I also found out the W7 install allows you to browse for drivers just in case it is unable to find what it needs to get the install job done. I put my drivers for the nvidia raid and motherboard on to a usb flash drive and just pointed the installer to them during the installation process and it all went smooth.
My Computer
At a glance
Windows 7 x64 ProIntel 990XCORSAIR XMS3 6GB SDRAM DDR3 1600 (7-7-7-20)2 x BFG 285 GTX OCXs in SLI
I just finished my build and have attempted to install 7. I set up the RAID array in the bios, it says that it's fine. When I get to the screen where you choose which disk to install the OS to it shows both 150g disks independently instead of a 300g volume. Anybody got a clue
My Computer
At a glance
windows 7intel Core i7 9206 GIG of Corsair Dominator GT 1866mhzGTX 295
