Sluggish Resume From Suspend Then Network Goes Down

fleamour

fleamour

New member
Member
Local time
11:20 PM
Messages
54
I find that after leaving my box in suspend overnight, it is very sluggish to resume. But after being online for the first 10 mins the network goes down & I have to run network diagnostics to fix. The network card gets reset each time with a host not found fault. I am using a Edimax Wireless 802.11 b/g/n 32-bit PCI Adaptor (EW-7722In.)

I am using the basic Windows driver as uninstalled the Edimax utility due to above fault.

:huh: :( :huh:

EDIT: This may be two separate problems, (tho it would be nice to solve both.) I am carrying out a dsk chk as advised on these forums for slow resume from suspend/sleep.
 
Last edited:

My Computer My Computer

At a glance

Windows 7 Ultimate x86 RetailE8400 3012MHzOCZ 4096MBPNY Geforce 220 1GB
OS
Windows 7 Ultimate x86 Retail
CPU
E8400 3012MHz
Motherboard
ASRock ConRoe1333-D667 R3.0
Memory
OCZ 4096MB
Graphics Card(s)
PNY Geforce 220 1GB
Sound Card
Onboard
Monitor(s) Displays
iiyama
Screen Resolution
Wide Screen
Hard Drives
Seagate 500GB
Western Digital 500GB
PSU
Antec 380W EarthWatts Green PSU 80plus Bronze Certified
Cooling
Noctua Low Profile NH-U9B
I am seeing these errors repeated in Event Viewer:

1 ~ Service Control Manager

The following boot-start or system-start driver(s) failed to load:
DwProt [This is repeated roughly around sluggish resume from suspend.]

2 ~ Event 6 ,Kernel-Processor-Power

Some processor performance power management features have been disabled due to a known firmware problem. Check with the computer manufacturer for updated firmware.

Also Lots of DNS connectivity warnings:

Name resolution for the name talk.google.com timed out after none of the configured DNS servers responded.

EDIT: DwProt is a Dr. Web Cure It process, seemingly uninstalled yonks ago. Yikes! Any help?
 

My Computer My Computer

At a glance

Windows 7 Ultimate x86 RetailE8400 3012MHzOCZ 4096MBPNY Geforce 220 1GB
OS
Windows 7 Ultimate x86 Retail
CPU
E8400 3012MHz
Motherboard
ASRock ConRoe1333-D667 R3.0
Memory
OCZ 4096MB
Graphics Card(s)
PNY Geforce 220 1GB
Sound Card
Onboard
Monitor(s) Displays
iiyama
Screen Resolution
Wide Screen
Hard Drives
Seagate 500GB
Western Digital 500GB
PSU
Antec 380W EarthWatts Green PSU 80plus Bronze Certified
Cooling
Noctua Low Profile NH-U9B

My Computer My Computer

At a glance

Windows 7 Ultimate x86 RetailE8400 3012MHzOCZ 4096MBPNY Geforce 220 1GB
OS
Windows 7 Ultimate x86 Retail
CPU
E8400 3012MHz
Motherboard
ASRock ConRoe1333-D667 R3.0
Memory
OCZ 4096MB
Graphics Card(s)
PNY Geforce 220 1GB
Sound Card
Onboard
Monitor(s) Displays
iiyama
Screen Resolution
Wide Screen
Hard Drives
Seagate 500GB
Western Digital 500GB
PSU
Antec 380W EarthWatts Green PSU 80plus Bronze Certified
Cooling
Noctua Low Profile NH-U9B
Ran DSK CHK, volume was clean. Ran the Dr. Web uninstaller & left PC suspended over night. Resume was a lot quicker but still not as quick as when left suspended for a couple of hours; still.

As for:

2 ~ Event 6 ,Kernel-Processor-Power

Some processor performance power management features have been disabled due to a known firmware problem. Check with the computer manufacturer for updated firmware.

ASRock say this is Intel SpeedStep which was set to "Auto" in BIOS. Now set to "Enabled".

The customary network drop out after resume from supend is still in affect tho. The network becomes sluggish then refuses to load any page. Left alone, a yellow triangle will appear then disappear many times, before I am forced to run network diagnostics. Whereupon The default gateway is not available error is fixed. Any ideas? Once network diagnostics fixes the default gateway error is fine until resuming from overnight suspend the following day.

My default gateway is an ISP provided D-Link DSL-2640R that is left on 24/7. Only 7 has the problem, my other Linux boxes work fine. I also have a VoIP Linksys PAP2 for my phone line. This plugs into router 24/7.

I do have auto channel scan set on the router, will try disabling...
 

My Computer My Computer

At a glance

Windows 7 Ultimate x86 RetailE8400 3012MHzOCZ 4096MBPNY Geforce 220 1GB
OS
Windows 7 Ultimate x86 Retail
CPU
E8400 3012MHz
Motherboard
ASRock ConRoe1333-D667 R3.0
Memory
OCZ 4096MB
Graphics Card(s)
PNY Geforce 220 1GB
Sound Card
Onboard
Monitor(s) Displays
iiyama
Screen Resolution
Wide Screen
Hard Drives
Seagate 500GB
Western Digital 500GB
PSU
Antec 380W EarthWatts Green PSU 80plus Bronze Certified
Cooling
Noctua Low Profile NH-U9B
Weeeelll...I set DNS to Google's public DNS yonks ago. But upon checking network properties both DNS fields were blank (possibly an install changing settings.)

If above does not rectify will try manually setting IP address and default gateway.
 

My Computer My Computer

At a glance

Windows 7 Ultimate x86 RetailE8400 3012MHzOCZ 4096MBPNY Geforce 220 1GB
OS
Windows 7 Ultimate x86 Retail
CPU
E8400 3012MHz
Motherboard
ASRock ConRoe1333-D667 R3.0
Memory
OCZ 4096MB
Graphics Card(s)
PNY Geforce 220 1GB
Sound Card
Onboard
Monitor(s) Displays
iiyama
Screen Resolution
Wide Screen
Hard Drives
Seagate 500GB
Western Digital 500GB
PSU
Antec 380W EarthWatts Green PSU 80plus Bronze Certified
Cooling
Noctua Low Profile NH-U9B
Problem is worse, happening every resume from suspend now.

Have tried re-entering Google public DNS where the fields were blank, will try my ISP's DNS by setting to auto.

Have manually set gateway & IP, will try again in the morning.

:eek: :confused: :eek:
 

My Computer My Computer

At a glance

Windows 7 Ultimate x86 RetailE8400 3012MHzOCZ 4096MBPNY Geforce 220 1GB
OS
Windows 7 Ultimate x86 Retail
CPU
E8400 3012MHz
Motherboard
ASRock ConRoe1333-D667 R3.0
Memory
OCZ 4096MB
Graphics Card(s)
PNY Geforce 220 1GB
Sound Card
Onboard
Monitor(s) Displays
iiyama
Screen Resolution
Wide Screen
Hard Drives
Seagate 500GB
Western Digital 500GB
PSU
Antec 380W EarthWatts Green PSU 80plus Bronze Certified
Cooling
Noctua Low Profile NH-U9B
Nothing works!

Also, most annoyingly, there is no check box to delete driver when uninstalling network adaptor. Is this normal for Win 7?

Obviously not! My Ethernet driver has the check box, but not my wireless adaptor, eek!
 

My Computer My Computer

At a glance

Windows 7 Ultimate x86 RetailE8400 3012MHzOCZ 4096MBPNY Geforce 220 1GB
OS
Windows 7 Ultimate x86 Retail
CPU
E8400 3012MHz
Motherboard
ASRock ConRoe1333-D667 R3.0
Memory
OCZ 4096MB
Graphics Card(s)
PNY Geforce 220 1GB
Sound Card
Onboard
Monitor(s) Displays
iiyama
Screen Resolution
Wide Screen
Hard Drives
Seagate 500GB
Western Digital 500GB
PSU
Antec 380W EarthWatts Green PSU 80plus Bronze Certified
Cooling
Noctua Low Profile NH-U9B
Only thing left to try is disable FW & AV, in turn to see if there is some kinda conflict.

EDIT: I might as well go for the fiftieth post [talking to myself...]
 

My Computer My Computer

At a glance

Windows 7 Ultimate x86 RetailE8400 3012MHzOCZ 4096MBPNY Geforce 220 1GB
OS
Windows 7 Ultimate x86 Retail
CPU
E8400 3012MHz
Motherboard
ASRock ConRoe1333-D667 R3.0
Memory
OCZ 4096MB
Graphics Card(s)
PNY Geforce 220 1GB
Sound Card
Onboard
Monitor(s) Displays
iiyama
Screen Resolution
Wide Screen
Hard Drives
Seagate 500GB
Western Digital 500GB
PSU
Antec 380W EarthWatts Green PSU 80plus Bronze Certified
Cooling
Noctua Low Profile NH-U9B
50th post. No solution:

Tried all manner of network jiggery pokery...In the end thought Comodo Fire Wall was the culprit, but no...
 
Last edited:

My Computer My Computer

At a glance

Windows 7 Ultimate x86 RetailE8400 3012MHzOCZ 4096MBPNY Geforce 220 1GB
OS
Windows 7 Ultimate x86 Retail
CPU
E8400 3012MHz
Motherboard
ASRock ConRoe1333-D667 R3.0
Memory
OCZ 4096MB
Graphics Card(s)
PNY Geforce 220 1GB
Sound Card
Onboard
Monitor(s) Displays
iiyama
Screen Resolution
Wide Screen
Hard Drives
Seagate 500GB
Western Digital 500GB
PSU
Antec 380W EarthWatts Green PSU 80plus Bronze Certified
Cooling
Noctua Low Profile NH-U9B
I think it is a MS service as have clean booted with all non MS services & no joy. Still drops connection when resuming from sleep. Thinking of diagnostic start up but need to know what MS service is responsible for sleep & WLAN?

WLAN AutoConfig is one, will probs wanna run FW still. can anyone advise?
 

My Computer My Computer

At a glance

Windows 7 Ultimate x86 RetailE8400 3012MHzOCZ 4096MBPNY Geforce 220 1GB
OS
Windows 7 Ultimate x86 Retail
CPU
E8400 3012MHz
Motherboard
ASRock ConRoe1333-D667 R3.0
Memory
OCZ 4096MB
Graphics Card(s)
PNY Geforce 220 1GB
Sound Card
Onboard
Monitor(s) Displays
iiyama
Screen Resolution
Wide Screen
Hard Drives
Seagate 500GB
Western Digital 500GB
PSU
Antec 380W EarthWatts Green PSU 80plus Bronze Certified
Cooling
Noctua Low Profile NH-U9B
Simple solution in the end. Edimax driver poorly written. Had to check "Delete driver software for this device" box when rolling back from Edimax driver to basic MS driver. The old Edimax driver must of been interfering with the operation of basic MS driver.
 

My Computer My Computer

At a glance

Windows 7 Ultimate x86 RetailE8400 3012MHzOCZ 4096MBPNY Geforce 220 1GB
OS
Windows 7 Ultimate x86 Retail
CPU
E8400 3012MHz
Motherboard
ASRock ConRoe1333-D667 R3.0
Memory
OCZ 4096MB
Graphics Card(s)
PNY Geforce 220 1GB
Sound Card
Onboard
Monitor(s) Displays
iiyama
Screen Resolution
Wide Screen
Hard Drives
Seagate 500GB
Western Digital 500GB
PSU
Antec 380W EarthWatts Green PSU 80plus Bronze Certified
Cooling
Noctua Low Profile NH-U9B
False dawn... Damn.
 

My Computer My Computer

At a glance

Windows 7 Ultimate x86 RetailE8400 3012MHzOCZ 4096MBPNY Geforce 220 1GB
OS
Windows 7 Ultimate x86 Retail
CPU
E8400 3012MHz
Motherboard
ASRock ConRoe1333-D667 R3.0
Memory
OCZ 4096MB
Graphics Card(s)
PNY Geforce 220 1GB
Sound Card
Onboard
Monitor(s) Displays
iiyama
Screen Resolution
Wide Screen
Hard Drives
Seagate 500GB
Western Digital 500GB
PSU
Antec 380W EarthWatts Green PSU 80plus Bronze Certified
Cooling
Noctua Low Profile NH-U9B
You must log in or register to reply here.

Similar threads

Clock Wrong After Resume from Suspend
Replies
2
Views
4K
Megahertz07
Megahertz07
Back
Top