Solved SFC SCANNOW help. corrupt files unable to get fix

hi all,
i am running windows 7 professional 64 bit.
i tried running sfc/scannow and windows resource protection found corrupt files but was unable to fix.
the cbs.log file is attached.
can i get some suggestions what to do next.?

Hello Rasal,

From your log, the files below at the locations below are corrupted. However, normally these would be in your C:\Program Files folder instead of the C:\Program Files (x86) folder, even in 64-bit Windows 7.

Do you have them in your C:\Program Files folder? If so, then delete the ones below in the C:\Program Files (x86) folder.

• C:\Program Files (x86)\DVD Maker\en-US\WMM2CLIP.dll.mui
• C:\Program Files (x86)\DVD Maker\WMM2CLIP.dll
• C:\Program Files (x86)\DVD Maker\Shared\Filters.xml
• ----------------------------------------------------
• C:\Program Files (x86)\windows sidebar\gadgets\MediaCenter.Gadget folder and all contents

Hope this helps for now,
Shawn

Hello Shawn,
Thank you for suggesting me to delete the corrupt files. But before i read your message my system was dead, means not booting up. it hanged in start up repairs for many hours, so finally i formatted the drive and installed win 7 32 bit version. Actually i was facing problem from last whole month, i used to install win 7 64 bit and in two or three days whenever i used to ran an update or install some software or driver, it used to get hanged and i ended up doing installing fresh, each time finding some other new reason.
i hope for now that shifting to 32 bit version solves my current problam of reformatting in few days!!!
both the windows version were genuine copy.

thanks...

You're welcome. I hope the new installation will run smoother for you.

Hi,
Reinstallation doesnt help, i formatted and installed win 32 twice and win 64 once in last three days but if i run windows update or just install important drivers for graphics or touchpad, it works fine for once,but after i shut down and start again then,start up repair gets started and it keeps on running for hours but in vain.

What should i do??

Rasal,

You might use the free program SeaTools for Windows or DOS at the link below to test your HDD with to see if there may be an issue with it.

| Seagate

Hi,
Luckily my emachines back up disk ran this time and i was able to restore my machine to factory settings, till now its functioning properly, hope it will continue to do so..
Thank you.

That's great news Rasal. I'm happy to hear it's working fine now.