My computer used to shut down and a message used to be displayed that there was a thermal event. I opened the computer, remove the screws of the fan and cleaned the heat sink underneath it of dust which it had a lot( and of course other parts too). after that I put the fan back but I am not sure whether I put it in original upside down position or in wrong way, anyhow the wires connecting with the fan are now in between the fan and the heat sink but computer still continued to shut down suddenly off and on sometimes even before booting. I again opened the computer and this time even unscrewed the heat sink and cleaned it with air blow and a brush. After that computer has become like dead. When I turn it on a green light beneath the off on button lits but there is absolutely no sound which I used to hear when the computer used to boot. What should I do now? thanks
My Computer
At a glance
MS Windows 7 Home Premium 32-bit SP1Intel Pentium 4 519K Prescott 90nm Technology1.00 GB Dual-Channel DDR @ 106MHz (2.5-3-3-7)SyncMaster(1400x1050@60Hz)Intel(R)82915G/GV/9...
- Computer Manufacturer/Model Number
- Desktop
- OS
- MS Windows 7 Home Premium 32-bit SP1
- CPU
- Intel Pentium 4 519K Prescott 90nm Technology
- Motherboard
- Intel Corporation D915GAG 66 °C
- Memory
- 1.00 GB Dual-Channel DDR @ 106MHz (2.5-3-3-7)
- Graphics Card(s)
- SyncMaster(1400x1050@60Hz)Intel(R)82915G/GV/910GLExpressChip
- Sound Card
- High Definition Audio Device / CM18738/C3DX PCI AUDIO DEVICE
- Hard Drives
- 313GB Seagate ST3320613AS ATA Device (SATA)44 °C