Just installed this new MOB chip and memory. I have 2 Nvidia 8800 GT cards so I can run 3 monitors. I know 1 is 16 bit and the other runs at 4 I do not use it for gameing and the tech guy at Aria said it would be fine with both Graphic Cards. I only get 1 card seen when I boot the card is fine because if I put it in the other slot is is seen so it is not a card issue. Why is the MOB not allowing WIn 7 to see the card?
Strange thing is Win 7 is aware of something see attached screen shot
Also please see here this indicates it must be seen http://i.imgur.com/dSyyE.jpg
My Computer
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Home Build
OS
Microsoft Windows 10 Pro 64-bit 10240 Multiprocessor Free
CPU
Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
Motherboard
Gigabyte Technology Co., Ltd. Z68AP-D3
Memory
16.00 GB
Graphics Card(s)
(1) NVIDIA GeForce 8800 GT (2) Intel(R) HD Graphics 3000
Sound Card
(1) Realtek High Definition Audio (2) Intel(R) Display Aud
Monitor(s) Displays
Dell U2140 & Dell 1905FP x 2
Screen Resolution
(1) 1920 x 1200 x 32 bits (4294967296 colors) @ 59 Hz (2)
Hard Drives
(1) WDC WD5000KS-00MNB0 (2) OCZ-NOCTI (3) ST1000DM003-9YN162 (4) Kingmax Kingmax USB Device (5) SAMSUNG SSD 830 Series
SLI support isn't universal for Z68 motherboards. The maker must buy a license from nVidia. (nVidia's drivers verify that by looking for a code in the motherboard's BIOS.)
Apparently Gigabyte didn't buy the license for the GA-Z68AP-D3. If you wish to use a multi-card solution, you're limited to AMD Crossfire (no license required).
