Want to install windows on SSD, using drivers/patches from current cpu

cremate

New member
I have my current system live and working well. I want to add an SSD as the main boot drive.

Is there a way I can migrate or reinstall easily on the new drive without having to run updates on everything again? The only hardware changing (adding) would be the SSD.

I plan to format the old drive to use as storage.
 

My Computer

OS
windows 7 x64 ultimate
Yes.

Imaging or cloning.

Windows has an imaging tool built in, but many say third party tools such as Macrium or Acronis are superior and easier to use.

Imaging and cloning can both fail. Be prepared to do a clean install with your Windows disk in that case.

Paragon has a migration tool that you can use also. I think it is $20.

Macrium is free. Acronis is paid; or free if you have a Seagate or Western Digital hard drive.
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Ignatz Special; 4 speed manual gearbox; factory air conditioning; one of one
OS
Windows 7 Home Premium SP1, 64-bit
CPU
Intel Skylake i5-6600K, not overclocked
Motherboard
AsRock Z170M Extreme 4, micro ATX
Memory
8 GB HyperX DDR4-2666 (2 x 4 GB)
Graphics Card(s)
none; graphics are integrated on CPU
Sound Card
onboard: Realtek ALC1150; external: USB Behringer UF0-202
Monitor(s) Displays
Dell S2340M 23 inch IPS
Screen Resolution
1600 x 900
Hard Drives
System: Crucial MX100 series SSD, 128 GB;
Data: Samsung Spinpoint 103SJ, 1 TB;
Backup: WD Caviar Green WD30EZRX-00D8PB0, 3 TB
PSU
Rosewill SilentNight 500 watt fanless, semi-modular
Case
Antec Solo II
Cooling
Noctua NH-U12S; Noctua F12 intake, Noctua S12A exhaust
Keyboard
Microsoft 200 6JH-00001 USB
Mouse
Dell or Microsoft optical wired; USB
Antivirus
Microsoft Security Essentials and Malwarebytes Premium
Browser
Pale Moon
Other Info
All fans PWM; speeds at idle: CPU circa 500 rpm; intake circa 600 rpm; exhaust circa 600 rpm; CPU temps 27 idle and 47 C load in a warm room (27 C/81 F) when running Intel Extreme Tuning Utility stress test.
Quick follow up - when you say fail, does that mean the transfer to drive? Will I risk losing data or needing a reinstall on the source?
 

My Computer

OS
windows 7 x64 ultimate
Where does it say 'fail' and at which step.
 

My Computer

Computer Manufacturer/Model Number
HP, Dell, Gateway, Toshiba - 4 laptops and 2 desktops
OS
Vista, Windows7, Mint Mate, Zorin, Windows 8
CPU
from 1.6GHz Duo to i7
Monitor(s) Displays
2x HP w2207
Hard Drives
5x HDD, 7x SSD, 12x Externals
Keyboard
with trackball - no mices
Mouse
Trackball mice
Internet Speed
DSL 6000
Quick follow up - when you say fail, does that mean the transfer to drive? Will I risk losing data or needing a reinstall on the source?

Are you referring to my post that cloning or imaging can fail?

Your data is always at risk.

I have never heard of cloning or imaging failing so badly that the source installation was harmed, but I'm not saying it can't happen.

The standard way it fails is that you cannot boot the restored image or cannot boot to the restore disk or cannot see the either the image file or the target partition when you boot the restore disk. Imaging is reliable enough to usually make it worth a try, but it is far from bullet-proof.

Cloning is just a direct transfer of a system from drive A to drive B with no intervening image. It's not usually used as a "disaster recovery" mechanism. You get an immediate answer to whether it worked or not. It's not an "insurance policy" type of thing that disappoints you when you read the fine print (have a drive failure). Cloning is pretty much just a convenience when moving to a different drive--more convenient than a clean install. If it works.

You have probably a 90 plus percent chance of it working out. It's up to you to decide if that is a showstopper before even making an attempt.
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Ignatz Special; 4 speed manual gearbox; factory air conditioning; one of one
OS
Windows 7 Home Premium SP1, 64-bit
CPU
Intel Skylake i5-6600K, not overclocked
Motherboard
AsRock Z170M Extreme 4, micro ATX
Memory
8 GB HyperX DDR4-2666 (2 x 4 GB)
Graphics Card(s)
none; graphics are integrated on CPU
Sound Card
onboard: Realtek ALC1150; external: USB Behringer UF0-202
Monitor(s) Displays
Dell S2340M 23 inch IPS
Screen Resolution
1600 x 900
Hard Drives
System: Crucial MX100 series SSD, 128 GB;
Data: Samsung Spinpoint 103SJ, 1 TB;
Backup: WD Caviar Green WD30EZRX-00D8PB0, 3 TB
PSU
Rosewill SilentNight 500 watt fanless, semi-modular
Case
Antec Solo II
Cooling
Noctua NH-U12S; Noctua F12 intake, Noctua S12A exhaust
Keyboard
Microsoft 200 6JH-00001 USB
Mouse
Dell or Microsoft optical wired; USB
Antivirus
Microsoft Security Essentials and Malwarebytes Premium
Browser
Pale Moon
Other Info
All fans PWM; speeds at idle: CPU circa 500 rpm; intake circa 600 rpm; exhaust circa 600 rpm; CPU temps 27 idle and 47 C load in a warm room (27 C/81 F) when running Intel Extreme Tuning Utility stress test.
Always back up your files, preferably offsite in case of a fire but definitely off the same HD which can fail.

You can upload up to 25 gigs to Skydrive with each Windows Live ID under a promotion right now for free 25 gigs in addition to the 7gb normally given free. I find this so easy I access my files from anywhere I am in the world this way rather than even bothering to carry them with me - keeping them synched as well on all my machines with Live Essentials' Mesh which makes the process effortless all around.
 
Back
Top