BSOD Opening Virtual PC (XP mode) host PC crashes

Vexx109

New member
I'm running windows 7 ultimate and i haven't run XP mode in a while so i'm not sure if it was an update or what that caused this. but the crashes that i'm referencing happened on 4/27/2012 hopefully i can get some help with this issue =) thank you in advanced
 

My Computer

OS
Windows 7 SP1 Ultimate x64
Related to EtronHub3.sys eXtensible Hub Driver. from Etron Technology Inc. Yours is from 2/2011. I would re-install newest available.
 

My Computer

Computer Manufacturer/Model Number
HP Pavillion dv-7 1005 Tx
OS
Win 8 Release candidate 8400
CPU
[email protected]
Memory
4 gigs
Graphics Card(s)
Nvidia 9600M
Sound Card
HD built-in
Monitor(s) Displays
17" Wxga
Screen Resolution
1440x900
Cooling
none
Internet Speed
45Mb down 5Mb up
the issues i'm experiencing are from today i'll re post the file cause i just realized there were some old dump files in there this is the latest without any problems from old mini dumps it is attached below
 

My Computer

OS
Windows 7 SP1 Ultimate x64
the issues i'm experiencing are from today i'll re post the file cause i just realized there were some old dump files in there this is the latest without any problems from old mini dumps it is attached below

These DMPS and the DMPS from post 1 are the same. Dated 4/27/12 with the same causes as listed before.
 

My Computer

Computer Manufacturer/Model Number
HP Pavillion dv-7 1005 Tx
OS
Win 8 Release candidate 8400
CPU
[email protected]
Memory
4 gigs
Graphics Card(s)
Nvidia 9600M
Sound Card
HD built-in
Monitor(s) Displays
17" Wxga
Screen Resolution
1440x900
Cooling
none
Internet Speed
45Mb down 5Mb up
hmm.... okay, so the Etron are my USB 3.0 ports? would i find etron or my MB manufacturer's website for drivers?
 

My Computer

OS
Windows 7 SP1 Ultimate x64
hmm.... okay, so the Etron are my USB 3.0 ports? would i find etron or my MB manufacturer's website for drivers?


Good question. I would use the mfr's site first.
 

My Computer

Computer Manufacturer/Model Number
HP Pavillion dv-7 1005 Tx
OS
Win 8 Release candidate 8400
CPU
[email protected]
Memory
4 gigs
Graphics Card(s)
Nvidia 9600M
Sound Card
HD built-in
Monitor(s) Displays
17" Wxga
Screen Resolution
1440x900
Cooling
none
Internet Speed
45Mb down 5Mb up
okay, so i couldn't find the Etron directly drivers so i went to the MB manufacturer's web page and dloaded those and to no avail still getting BSOD, these are the dumps from the last three crashes the latest one i think i finally had the drivers properly updated in so the first two will probably say it was still the etron
 

My Computer

OS
Windows 7 SP1 Ultimate x64
okay, so i couldn't find the Etron directly drivers so i went to the MB manufacturer's web page and dloaded those and to no avail still getting BSOD, these are the dumps from the last three crashes the latest one i think i finally had the drivers properly updated in so the first two will probably say it was still the etron


Most recent one 4/28/12 4:07 PM sstill related to the ETRON driver or hardware.

Other possible contributing factors

Apple Charger

AVG

Related to dvdfabio.sys DVDFabIO Device Driver - x86 from Fengtao Software Inc.
 

My Computer

Computer Manufacturer/Model Number
HP Pavillion dv-7 1005 Tx
OS
Win 8 Release candidate 8400
CPU
[email protected]
Memory
4 gigs
Graphics Card(s)
Nvidia 9600M
Sound Card
HD built-in
Monitor(s) Displays
17" Wxga
Screen Resolution
1440x900
Cooling
none
Internet Speed
45Mb down 5Mb up
Back
Top