I shutted down my computer this morning properly. When I turned it on in the evening I was forced to check filesystem. Filesystem errors were fixed, but after booting on in about a minute I got a BSOD: "page fault in nonpaged area".
I've booted into safe mode and all works fine. I've tested SMART on my disks all fine. RAM also ok. Tried to remove some software, drivers, nothing works :/
My system is:
Windows 7 Ultimate 64-bit BOX Full Retail SP1
Age of system: about 3-4 months.
2x Quad Core Intel Xeon E5472, 32 GB DDR2 FB-DIMM ECC, ATI Radeon HD5770 1 GB DDR5, 4x A-DATA 30 GB SSD in RAID 0 on Areca ARC-1231ML controller + BBU (for Windows 7), A-DATA 40 GB SSD (for Mac OS X), 980W Delta power supply, LG DVD-RW 22x
I've booted into safe mode and all works fine. I've tested SMART on my disks all fine. RAM also ok. Tried to remove some software, drivers, nothing works :/
My system is:
Windows 7 Ultimate 64-bit BOX Full Retail SP1
Age of system: about 3-4 months.
2x Quad Core Intel Xeon E5472, 32 GB DDR2 FB-DIMM ECC, ATI Radeon HD5770 1 GB DDR5, 4x A-DATA 30 GB SSD in RAID 0 on Areca ARC-1231ML controller + BBU (for Windows 7), A-DATA 40 GB SSD (for Mac OS X), 980W Delta power supply, LG DVD-RW 22x
Last edited:
My Computer
At a glance
Windows 7 Ultimate 64-bit2x Intel Xeon E5472 3.0 GHz32 GB DDR2 FB-DIMM Micron/Hynix2xATI Radeon HD5770 1 GB DDR5 XFX + Apple gen...
- Computer Manufacturer/Model Number
- Apple Mac Pro 3,1 (Model 2008)
- OS
- Windows 7 Ultimate 64-bit
- CPU
- 2x Intel Xeon E5472 3.0 GHz
- Motherboard
- Apple - Foxconn
- Memory
- 32 GB DDR2 FB-DIMM Micron/Hynix
- Graphics Card(s)
- 2xATI Radeon HD5770 1 GB DDR5 XFX + Apple genuine
- Sound Card
- Realtek High Definition Audio
- Monitor(s) Displays
- Apple Cinema Display 23"
- Hard Drives
- 1x Kingston SSDNow 40 GB
4x Kingston SSDNow S100 SS100S2/16G
2x Samsung HD502HJ 500 GB
1x Seagate ST3500418AS 500 GB
Areca ARC-1210 RAID Controller
- PSU
- Delta Electronics 980W
- Case
- Stock
- Cooling
- Stock
