wells78660
New member
Need some help from anyone.
I'm trying to install Windows 7 on a WD 500gb freshly formatted to NTFS. Windows 7 first copies the files and then says its starting up and then hangs up. My bios see's the hard drive and knows it's there. I never get a chance to use F6 to load the Sata drivers that I have on a floppy drive. It never asks me. I first tried to load with the Sata Drive unpartitioned but that failed. So I am now trying to do it on a formatted drive. I'm not sure if the problem is that Windows 7 doesn't recognize that I have a Sata Drive attached. Can anyone give me some ideas for things to try?
Jack
I took the motherboard, processor, and ram back to Frys and got store credit. I changed from a Gigabyte motherboard to an Asus motherboard, same processor, and associated ram. Windows 7 loaded with no problems. Fry's stated that the motherboard must have been bad due to the issues that I was having. The processor and ram were suspected to be good. When I loaded Windows 7 I didn't have to load any Sata drivers the bios and windows 7 picked up the Sata Drive with no problems. Thanks for the help.
I'm trying to install Windows 7 on a WD 500gb freshly formatted to NTFS. Windows 7 first copies the files and then says its starting up and then hangs up. My bios see's the hard drive and knows it's there. I never get a chance to use F6 to load the Sata drivers that I have on a floppy drive. It never asks me. I first tried to load with the Sata Drive unpartitioned but that failed. So I am now trying to do it on a formatted drive. I'm not sure if the problem is that Windows 7 doesn't recognize that I have a Sata Drive attached. Can anyone give me some ideas for things to try?
Jack
I took the motherboard, processor, and ram back to Frys and got store credit. I changed from a Gigabyte motherboard to an Asus motherboard, same processor, and associated ram. Windows 7 loaded with no problems. Fry's stated that the motherboard must have been bad due to the issues that I was having. The processor and ram were suspected to be good. When I loaded Windows 7 I didn't have to load any Sata drivers the bios and windows 7 picked up the Sata Drive with no problems. Thanks for the help.
Last edited:
My Computer
- Computer Manufacturer/Model Number
- GENERIC
- OS
- windows 7
- CPU
- AMD Phenom™ II X4 965 HDZ965FBK4DGM
- Motherboard
- GIGABYTE GA-MA785GMT.UD2H
- Memory
- 4 gig of Corsair Dual Channel DDR3 1666+
- Graphics Card(s)
- Internal Integrated ATI Radeon HD 4200 graphics
- Sound Card
- Internal
- Monitor(s) Displays
- generic 19"
- Hard Drives
- Western Digital 500 gb Sata 2
Seagate 500 gb Sata 2
- PSU
- 500 watt
- Case
- Thermocool
- Cooling
- 120mm fans
