error message when try to partition HD

I just took my new HPE-110f with 1Tb HD ot f the box and want to partiton the HD before I do anything else. So I went to Windows7 Disk Management to do this. Using the elevated command prompt I got as far as selecting disk 0 as this is what I want to partition (931Gb free 0 Gb), then entered create partition primary and rec'd the following: "Virtual Disk Service Error: There is not enough usable space for this operation."
I do not understand this. I can understand things pretty well; I consider myself an above average user.

Any help will be appreciated.

Hello tallgalpal, welcome to Seven Forums!


Have a look at the tutorial and the "Related Tutorials" at the bottom of the tutorial to see if any will be a help.

http://www.sevenforums.com/tutorials/2674-partition-volume-create-new.html

Thank you. I went through all the tutorial info. Had to take what I consider a back door approach and shrink the drive to then establish other volumes. As an info point this is an HPE-110f.

tallgalpal said:

Thank you. I went through all the tutorial info. Had to take what I consider a back door approach and shrink the drive to then establish other volumes. As an info point this is an HPE-110f.

Click to expand...

Hello again.

Did you accomplish what you needed to do? Just so we'll know.