Can't download Active x Control for SSL VPN

S

Scottybs23

New member
Local time
1:52 AM
Messages
2
Hi All,

Im' hoping someone can help as this problem is driving me crazy and my IT department can't even help. Basically, once I've connected to my SSL VPN, and go to Activate SSL VPN Tunnel Mode it comes up with the below problem:-

FAiled to start SSL VPN Tunnel client. Please check if it is installed properly. You need administrator priviliges on your pc to install or update the Tunnel Client.

My IT department at work are clueless but tell me I should be asked at that point to download the Active X Control. But its not. And I am the Administrator on this computer!! Someone please help as this is very frustrating!!!!
 

My Computer My Computer

OS
Windows 7
Scottybs23 said:
Hi All,

Im' hoping someone can help as this problem is driving me crazy and my IT department can't even help. Basically, once I've connected to my SSL VPN, and go to Activate SSL VPN Tunnel Mode it comes up with the below problem:-

FAiled to start SSL VPN Tunnel client. Please check if it is installed properly. You need administrator priviliges on your pc to install or update the Tunnel Client.

My IT department at work are clueless but tell me I should be asked at that point to download the Active X Control. But its not. And I am the Administrator on this computer!! Someone please help as this is very frustrating!!!!
Click to expand...


were you able to resolve the issue you have? Please help.
 

My Computer My Computer

OS
Win 7
Yes- but the problem I have now is that when I run the SSL VPN and connect, it keeps disconnecting...
 

My Computer My Computer

OS
Windows 7
Try this method and I am certain it will work.

Installing SSL VPN for Windows 7 (32 & 64 bit versions)​
•​
​
​
​
Under the control panel, go to user accounts, and then user account control settings​

•​
​
​
​
Disable UAC settings completely (turn slider all the way down to "never notify")​

•​
​
​
​
Save settings, and follow prompt to reboot the system​

•​
​
​
​
Follow normal SSL VPN install instructions. You will receive a prompt whether you
want to allow the system access to install the software (this is what was being
blocked by the UAC previously).​

•​
​
​
​
Once the install is complete and you are able to see bytes sent and received, log out
of SSL VPN, and reverse the procedure of disabling the UAC settings, changing them
back to your previous default​

•​
​
​
​
Follow the prompt to reboot the computer, and you should now be able to connect​

with SSL VPN while the UAC default setting is enabled.

Good luck.
 

My Computer My Computer

OS
Win 7
32 bit version of IE.

I have found that you cannot install the SSLVPN Netextender software if you are using a 64 bit version of Internet Explorer. For the activex components to install correctly, you must use the 32 bit Version of IE.
 

My Computer My Computer

Computer Manufacturer/Model Number
Dell Latitude D620
OS
Windows 7 Ultimate 64 bit
CPU
Dual Core
You must log in or register to reply here.
Back
Top