Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Easy Tune 6

16 Jan 2011   #1
cemcilfa

Windows 7 Ultimate x64
 
 
Easy Tune 6

Hello,
When I was going through my Pc I accidentaly ran EasyBoost. While I didn't know what I had done I let it run for about 25mins. After this my cpu fan was going crazy so I switched of my Pc.
I think that EastBoost has tweaked aroung with my RAM voltage settings because when I take a RAM module out (I have 4x4gb) my system runs fine, but when I put it back in I receive BSod's.
Is there any way I can put it back to its origional state
Many thanks in advance


My System SpecsSystem Spec
.

16 Jan 2011   #2
Mike Connor

Several, including Windows 7 x64 Ultimate
 
 

Quote   Quote: Originally Posted by cemcilfa View Post
Hello,
When I was going through my Pc I accidentaly ran EasyBoost. While I didn't know what I had done I let it run for about 25mins. After this my cpu fan was going crazy so I switched of my Pc.
I think that EastBoost has tweaked aroung with my RAM voltage settings because when I take a RAM module out (I have 4x4gb) my system runs fine, but when I put it back in I receive BSod's.
Is there any way I can put it back to its origional state
Many thanks in advance
Run it again and set it back to default; ( Outlined in red in the screenshot below):



Regards....Mike Connor
My System SpecsSystem Spec
18 Jan 2011   #3
cemcilfa

Windows 7 Ultimate x64
 
 

I tried it but the same thing happend
Thanks for your help
My System SpecsSystem Spec
.


18 Jan 2011   #4
Mark Phelps

Win7 Pro 32-bit, Win8 Pro 32-bit
 
 

You had better luck than I did with ET6. Mine locked up my PC on my three separate attempts, in each instance, claiming it was unable to write settings. I eventually gave up.

I have read that ET writes changes to the BIOS -- which is why rebooting often will not fix the problems -- even though the User Guide says that rebooting WILL fix it.

In my case, I had imaged off the drive BEFORE I started messing with ET6. So, when I got the BSOD on boot, I restored the old image.

You could try resetting the CMOS values to their defaults. That should resturn them to stable values.
My System SpecsSystem Spec
20 Jan 2011   #5
Mike Connor

Several, including Windows 7 x64 Ultimate
 
 

Quote   Quote: Originally Posted by cemcilfa View Post
I tried it but the same thing happend
Thanks for your help
Can also be caused by a faulty ram stick, or one that doesn't match. It is also possible that if you have used overclocking settings that a ram stick can't handle, that it is damaged as a result.

If you can't reset the BIOS using easy tune, then go into the BIOS at startup and reset to default.

If the RAM stick still causes problems at default settings, then replace it with THE SAME TYPE OF RAM STICK you have in the other slots.

You may need to change some BIOS settings again afterwards, when everything runs depending on what you have installed and how it is set up. Especially hard disc settings.

Regards....Mike Connor
My System SpecsSystem Spec
Reply

 Easy Tune 6




Thread Tools





Similar help and support threads
Thread Forum
Easy Tune 6 Please remove before install. But its not installed!!
Hi.. So my freaking computer crashed and i had to make a Windows recover but with files keeped... And windows ended up uninstalling litterarly everything. Luckely it made a windows.old folder. I now tryed to Reinstall Easy Tune 6 That is a program for my Motherboard 970A-DS3P ( its completely...
Software
PC Tune Up
I keep getting the attached screen shop coming up on my computer and would like to know, is it worth having or is it just a scam to get my hard earned cash? How do AVG know how fast my machine works and do they have access to it to get that sort of information. Should I be worried about the...
General Discussion
HD tune How to test SSD??
Ive downloaded the trial version of this app as recommended under the free software thread. Just need to know whats the recommended way to test the SSD with the app. Many thanks
Software
avg pc tune up 2011 & tune up utilities 2011??
Hello everyone:is it possible to benefit from two optimizers,my pc has never been this fast not even when i purchased it! advice is needed and appriciated Kind Regards Asser.:D
Performance & Maintenance
Tune Up
Hi,Just want to know whether Tune up utilities is good to use? Or wheather it have any side effect on my system.
Software
Need help to overclock / Easy tune 6
Hi, I have a core2quad Q6660 and a gigabyte mobo. I used to be able to overclock my CPU with Gigabyte's easy tune 6 But now it doesn't work anymore with Win7 SP1 On start there is a message "CPU or memory not supported. If I try to OC manually on the BIOS it always fail Default is 233x9 =...
PC Custom Builds and Overclocking

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App