Hi, I have burned Panda SafeCD to dvd. Want to run boot scan. Will not connect to internet, thus will not run. Tried diff. config. to make connect, no luck. I have dynamic IP from Verizon, running Win7 x64. Using Windows firewall. Using WPA2-PSK encription. It tries to connect but doesn't config. Any ideas how to make this auto connect to internet to get updated defs. It searches my wifi connection but won't config. Thank You for any help in figuring this out.
Hi burnnoticefan Welcome to SevenForums
That is one my favorate shows also, now for your problem have you tried a reset on your modem, shut down your computer, unplug the modem completely, wait 10 minutes, plug the modem back in and start your computer, let come back up and resink
I'm not familiar with the software you are using, but most of those "live" discs won't work with wireless. Try using a cable for now, just to get it to run.
Thanks for the help!! I don't think Panda SafeCD works with wireless wifi. Am going to try a cable next boot up and see if works. Thanks again!!!!
Quote