BSOD : Everytime i try to run this program


  1. Posts : 4
    Windows 7 Home Premium 64bit
       #1

    BSOD : Everytime i try to run this program


    Hey guys, I'm new over here and I've experienced quite a number of BSODs since i got this computer but I've never really got help and just used google and updated drivers etc.

    Anyway, I've been using Vuze for the past few weeks and it's running fine and stuff but recently every time i run the program i get the PFN_LIST_CORRUPT BSOD without fail. I had the USB something error but i fixed it by updating my BIOS.

    Any help would be useful because i tried reading on how to analyze the dumps but to no avail .

    Thanks a lot in advance :)

    P.s. I have Norton 360 installed even though the report says that i don't have any anti-virus..

    Is Windows 7 . . .
    - x86 (32-bit) or x64 ? x64
    - the original installed OS on the system? Windows 7 Home Premium
    - an OEM or full retail version? Full Retail

    - What is the age of system (hardware)? Around 2 Years?
    - What is the age of OS installation (have you re-installed the OS?)
    Less than a year since it's a new hard disk
    BSOD : Everytime i try to run this program Attached Files
      My Computer


  2. Posts : 8,383
    Windows 10 Pro x64, Arch Linux
       #2

    Your Razer Diamondback driver is the cause, please update it
    Razer Support

    An old 2004 driver should be updated, it belongs to a software from http://www.brother-usa.com/downloads/
    Code:
    BrPar64a.sys        fffff880`04872000    fffff880`0487c000    0x0000a000    0x40e17e92    29/06/2004 18:37:06
    If the above does not fix the isssue:

    Use the Norton Removal Tool and remove your Norton product. Then reinstall the latest version
    Code:
    SYMEFA64.SYS+ce000    fffff880`012da000    fffff880`013be000     0x000e4000    0x4d7d899a    14/03/2011 07:20:58

    Code:
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    
    BugCheck CD, {fffff980717d7000, 0, fffff80002eca77a, 0}
    
    Unable to load image \SystemRoot\system32\drivers\copperhd.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for copperhd.sys
    *** ERROR: Module load completed but symbols could not be loaded for copperhd.sys
    
    Could not read faulting driver name
    Probably caused by : copperhd.sys ( copperhd+16c9 )
    
    PAGE_FAULT_BEYOND_END_OF_ALLOCATION (cd)
    N bytes of memory was allocated and more than N bytes are being referenced.
    This cannot be protected by try-except.
    When possible, the guilty driver's name (Unicode string) is printed on
    the bugcheck screen and saved in KiBugCheckDriver.
    Arguments:
    Arg1: fffff980717d7000, memory referenced
    Arg2: 0000000000000000, value 0 = read operation, 1 = write operation
    Arg3: fffff80002eca77a, if non-zero, the address which referenced memory.
    Arg4: 0000000000000000, Mm internal code.
    
    Debugging Details:
    ------------------
    
    
    Could not read faulting driver name
    
    READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80003103100
     fffff980717d7000 
    
    FAULTING_IP: 
    nt!memcpy+ca
    fffff800`02eca77a 4c8b540af8      mov     r10,qword ptr [rdx+rcx-8]
    
    MM_INTERNAL_CODE:  0
    
    CUSTOMER_CRASH_COUNT:  1
    
    DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP
    
    BUGCHECK_STR:  0xCD
    
    PROCESS_NAME:  razerhid.exe
    
    CURRENT_IRQL:  1
    
    IRP_ADDRESS:  fffff98072442f3b
    
    TRAP_FRAME:  fffff8800c66a1c0 -- (.trap 0xfffff8800c66a1c0)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=737373737373025f rbx=0000000000000000 rcx=000000000018ec40
    rdx=fffff980716483c4 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff80002eca77a rsp=fffff8800c66a358 rbp=00000000a000000c
     r8=000000000000018c  r9=0000000000000002 r10=0000000000000000
    r11=000000000018eadc r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei pl nz na pe nc
    nt!memcpy+0xca:
    fffff800`02eca77a 4c8b540af8      mov     r10,qword ptr [rdx+rcx-8] ds:30d8:fffff980`717d6ffc=????????????????
    Resetting default scope
    
    LAST_CONTROL_TRANSFER:  from fffff80002e7fa0c to fffff80002ed3d00
    
    STACK_TEXT:  
    fffff880`0c66a058 fffff800`02e7fa0c : 00000000`00000050 fffff980`717d7000 00000000`00000000 fffff880`0c66a1c0 : nt!KeBugCheckEx
    fffff880`0c66a060 fffff800`02ed1e2e : 00000000`00000000 fffff980`717d7000 00000000`00000000 fffff980`72442ee0 : nt! ?? ::FNODOBFM::`string'+0x4621f
    fffff880`0c66a1c0 fffff800`02eca77a : fffff800`02ee90c3 00000000`00000000 fffff980`72442fb0 fffff980`000426c0 : nt!KiPageFault+0x16e
    fffff880`0c66a358 fffff800`02ee90c3 : 00000000`00000000 fffff980`72442fb0 fffff980`000426c0 fffffa80`08242a60 : nt!memcpy+0xca
    fffff880`0c66a360 fffff800`02ed73bf : fffff980`72442fb3 fffff800`00000001 00000000`00000001 fffff880`00000005 : nt!IopCompleteRequest+0x5a3
    fffff880`0c66a430 fffff800`0337019f : fffff980`72442ee0 00000000`00000000 fffff980`72442e00 00000000`00000000 : nt!IopfCompleteRequest+0x6df
    fffff880`0c66a510 fffff880`08b0d6c9 : ffffffff`ff676980 00000000`00000088 00000000`00000000 fffff980`72442ee0 : nt!IovCompleteRequest+0x19f
    fffff880`0c66a5e0 ffffffff`ff676980 : 00000000`00000088 00000000`00000000 fffff980`72442ee0 00000000`00000000 : copperhd+0x16c9
    fffff880`0c66a5e8 00000000`00000088 : 00000000`00000000 fffff980`72442ee0 00000000`00000000 00000000`00000000 : 0xffffffff`ff676980
    fffff880`0c66a5f0 00000000`00000000 : fffff980`72442ee0 00000000`00000000 00000000`00000000 00000000`00000000 : 0x88
    
    
    STACK_COMMAND:  kb
    
    FOLLOWUP_IP: 
    copperhd+16c9
    fffff880`08b0d6c9 ??              ???
    
    SYMBOL_STACK_INDEX:  7
    
    SYMBOL_NAME:  copperhd+16c9
    
    FOLLOWUP_NAME:  MachineOwner
    
    MODULE_NAME: copperhd
    
    IMAGE_NAME:  copperhd.sys
    
    DEBUG_FLR_IMAGE_TIMESTAMP:  4af91b39
    
    FAILURE_BUCKET_ID:  X64_0xCD_VRF_copperhd+16c9
    
    BUCKET_ID:  X64_0xCD_VRF_copperhd+16c9
    
    Followup: MachineOwner
    ---------
      My Computer


  3. Posts : 4
    Windows 7 Home Premium 64bit
    Thread Starter
       #3

    The Razer mice wasn't the problem because the driver was the same, i removed Norton and i also removed the old Brother driver from the previous printer and i tried to run the program again and it works perfectly like before! Thanks a million +rep!!
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:41.
Find Us