Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Interpreting CPUID

30 Dec 2011   #11
masplin

Windows 7 64 bit
 
 

So after a good clean out it seemed to hold the temp down to 70-71C . Horrible fan noise appeared above 2400 RPM but did stop when I ended the test. Can I assume Fan1 is the one over the heatsink and Fan2 is the one at the back of the PC casing? Oddly Fan2 peaked at 2600 RPM, but then sat at 2000RPM even while the temp was pushing above 70C. Is that obviously why Fan2 doesn't run at full capacity to keep the temp as low as possible?


My System SpecsSystem Spec
.
Reply

 Interpreting CPUID




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
CPUID Hardware Monitor
I have CPUID Hardware Monitor installed and I like it. But, there seems to be a lot of information available that I do not use OR that is not being updated. How can I determine which readings are "for real" and which are pseudo readings. Example: I have six fan speed readings that never...
Performance & Maintenance
Freeware that is similar to CPUID-Z
In the past I have made use of a free software that is very much like CPUID-Z but it included info that CPUID-Z does not. Unfortunately I have forgotten the name of it. If anyone knows or can suggest such a free software please respond. Thank you.
Software
CPUid Hardware Monitor
Hi there im new to the forum but not new on computers :) I installed HWmonitor in order to check the voltage of my psu but the results i get are not even close. I know that you will tell me that every messure program is not accurate but the question here is how do i know what should be the...
Hardware & Devices
CPUID Monitor
Any of you that use this, when it is opened I get this prompt. How can I get rid of it?
Software
CPUID HWMonitor accuracy?
A couple days ago I installed CPUID HWMonitor to check my hard drive temperatures. Is it a dependable tool for this? I noticed that the voltages it reports are unrealistic, and have found many reports of this on the web (often with comments like "Your PC wouldn't boot with those voltages".) Are...
Software
CPUID Monitoring
Those of you who use CPUID, I have a question for you. There is a FAN monitor and sometimes RPM's Minimum is 0 (it is not on this snip), which indicates to me it has stopped. I have three case fans and the CPU fan. Is this the CPU fan and have yours ever shown Zero?
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:33.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App