Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Trying to use Killdisk in DOS but keeps saying bad command or filename

23 Feb 2012   #1
moz

Windows 98
 
 
Trying to use Killdisk in DOS but keeps saying bad command or filename

I am trying to use Killdisk in DOS, but everytime I write >killdisk.exe -? (as instructed) it says that it is a bad command or filename. I am quite the amateur and so I apologise in advance if this is a silly question - I have never used DOS before!

I appreciate any advice. Thank you


My System SpecsSystem Spec
.
23 Feb 2012   #2
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Hi Moz,

What are you trying to achieve with killdisk? Perhaps we can suggest a better alternative.

Regards,
Golden
My System SpecsSystem Spec
28 Feb 2012   #3
moz

Windows 98
 
 

Hi Golden,

Thanks for your reply...sorry for my delay.

I am getting rid of an old computer, and so want to erase the hard drive before doing so.

Thanks again,
Moz
My System SpecsSystem Spec
.

Reply

 Trying to use Killdisk in DOS but keeps saying bad command or filename




Thread Tools





Similar help and support threads
Thread Forum
Can't install Win7 after KillDisk wiped. BOOTMGR & DVD driver missing.
OK, I was a fool. My warning to others: do not use "Active KillDisk" to erase your system hard-disk if you want to install Windows-7. Mea culpa. I listened to someone I shouldn't have. Live, learn, and teach others. :cry: OK, what's done is done, spilt milk, water over the dam. (Don't let it...
Installation & Setup
Used KillDisk, now can't Boot up Installation Disk. (Windows 7 Pro x64
Hi, I am going crazy with this issue i'm having. First it all started out as a pretty bad virus. The only way I could get rid of it was totally wiping my 2TB WDigital drive SATA. Now after I used KillDisk, I boot up the Installation disk and after the 'Starting Windows' screen, it goes to a black...
Installation & Setup
KillDisk + windows 7
I got a 500gb hard drive, and i'm going to use killdisk to erase everything on my hard drive first.. and then i'm going to pop in my cd for installing windows 7 again, would this work or is it more complicated? please explain
Installation & Setup
Question about the use of active@killdisk kprogram
I got a new computer. So I am going to dump the old computer. I would like to erase everything in both C- and D-drives with "Active@ KillDisk" program. Before doing that, I have following queswtions: a) Once a hard drive is erased with Active @killdisk, can the erased disk be re-vived by...
General Discussion
Trying to use Active@Killdisk in DOS
I am trying to use Killdisk in DOS and it loads up fine (Anyone who is struggling to get it to run in dos after making the disc/floppy/usb then setting the bios correctly, go back to bios and make sure you are in IDE mode, not RAID mode - had me stumped for about 48 long hours) The problem I am...
Software
Formatting drive with Active KillDisk
I'm finding the process itself to be somewhat confusing. Not the creating a Bootable CD/Floppy/USB part, but the formatting part. Anywhere I could find a step-by-step guide? Thanks.
Software

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:55.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App