Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Application Does Not Start in Windows 7


05 Apr 2012   #1

Windows 7 Professional 64-bit
 
 
Application Does Not Start in Windows 7

I recently installed a new 60GB SSD as my primary hard drive and re-installed Windows 7 Professional 64-bit. I then installed SSD Fresh from Abelssoft to optimize Windows to run on the SSD. It seemed to install okay, but when I try to run the utility, its splash screen appears briefly before it quietly closes. No errors are displayed; the utility just fails to launch. I have run SSD Fresh on another SSD-equipped Windows 7 Pro x64 computer in the past without any problems.

Does anyone know what might be preventing the program from running? I tried running `sfc /scannow` from the command line (with administrator privileges), shutting down the Spybot Resident, and disabling the firewall and virus scanner. I also tried running the tool as administrator; I even tried reinstalling it, running the installer as administrator. No luck.

Every time I try to launch the program the Event Viewer logs this same set of errors:

Error 4/2/2012 11:35:44 PM Application Error 1000 (100)
Faulting application name: SSDFresh.exe, version: 1.0.0.0, time stamp: 0x4f2a45d8
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x000007ff0016dbba
Faulting process id: 0x994
Faulting application start time: 0x01cd11fd9fe978df
Faulting application path: C:\Program Files (x86)\SSD Fresh\SSDFresh.exe
Faulting module path: unknown
Report Id: dfeed551-7df0-11e1-a2c7-002522c47ec0


Error 4/2/2012 11:35:43 PM .NET Runtime 1026 None
Application: SSDFresh.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.NullReferenceException
Stack:
at AbBugReporter.BugForm.InitLanguage()
at AbBugReporter.BugForm..ctor(AbFlexTrans.LanguageInfo, AbBugReporter.BugReportManager, Boolean)
at AbBugReporter.BugReportManager.Show(System.Exception)
at SSDFresh.App.App_DispatcherUnhandledException(System.Object, System.Windows.Threading.DispatcherUnhandledExceptionEventArgs)
at System.Windows.Threading.Dispatcher.CatchException(System.Exception)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.WrappedInvoke(System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.InvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run()
at SSDFresh.App.Main()


Error 4/2/2012 11:35:39 PM SideBySide 59 None
Activation context generation failed for "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\csc.exe".Error in manifest or policy file "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\csc.exe.Config" on line 0. Invalid Xml syntax.


Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None
Error 4/2/2012 11:35:39 PM SideBySide 59 None


For those who are interested, here is my system configuration:

Any ideas or suggestions would be appreciated. Thanks.


My System SpecsSystem Spec
.

07 Apr 2012   #2

Windows 7 home premium x64
 
 

I believe your best bet is to start from scratch, you don't need to optimize an SSD.
Side by side errors can be cured, usually it means a program doesn't have the correct interface .dll so it cannot display. Reinstalling the program causing it should fix it.
My System SpecsSystem Spec
07 Apr 2012   #3

Windows 7 Professional 64-bit
 
 

I prefer to use a third party application because it is Windows; it doesn't manage anything efficiently; (Microsoft==Bloatsoft) = TRUE).

However, that's beside the point. There is obviously a problem, or the application wouldn't have crashed on launch. Let's please address that.

Some posts I've read elsewhere seem to indicate that I may need to (re)install the x86 and/or x64 C++ redistributable. What do you think?

It is also worth noting that I have been able to use SSD Fresh on another similarly configured system (Windows 7 Pro 64-bit), and, as stated in my original post, I did try reinstalling the program (with administrator privileges, I might add).
My System SpecsSystem Spec
.


10 Apr 2012   #4

Windows 7 Professional 64-bit
 
 

Problem resolved:
I did a repair of the .NET Framework 4 Client, and the problem seems to have resolved itself. I can only assume that the framework somehow became corrupted.

Click Start > Control Panel > Programs and Features, select Microsoft .NET Framework 4 Client Profile, click Uninstall/Change. In the Maintenance screen that opens, choose "Repair .NET Framework 4 Client Project to its original state" and click Next. After the repair completes, click Finish.

Thanks for the help!
My System SpecsSystem Spec
Reply

 Application Does Not Start in Windows 7




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:22 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33