Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: windows 7 and power dvd 7.3

21 Sep 2009   #11
Adrian

 

Quote   Quote: Originally Posted by Zahl View Post
Edit- Probably not a good idea to be sharing your serial key like that
No worries there, the disc has a serial number so the activation key has little use unless you have the physical disc.

Regards,
Adrian


My System SpecsSystem Spec
.

21 Sep 2009   #12
Zahl

windows 8.1 Pro x64
 
 

Sounds good, just didn't want you to try installing it and seeing it was already activated 1,000 times
But I wonder, is everyone that has this working on the RTM build of Win 7? All the posts I have found on the net where peeps are saying its working are from the beta/RC builds. I wonder if that has something to do with it..
My System SpecsSystem Spec
21 Sep 2009   #13
SquonkSC

Win7 Build 7600 x86
 
 

Quote   Quote: Originally Posted by Zahl View Post
But I wonder, is everyone that has this working on the RTM build of Win 7? All the posts I have found on the net where peeps are saying its working are from the beta/RC builds. I wonder if that has something to do with it..
Good question!

Though hard to find out.
My System SpecsSystem Spec
.


21 Sep 2009   #14
UKMedia

Windows 7 Ultimate 64Bit (SP 1)
 
 

Hi

I have PowerDVD 7 working on my system but if you upgrade to Windows 7 rather than carry out a clean install, you need to uninstall PowerDVD afterwards, reboot and then re-install.

I've been using PowerDVD 7 to watch BD disks for 2-3 weeks now with no problems, apart from the registration window won't go away.

I also found that I had to do the same with Virtual Clone Drive.

Regards
UKMedia
My System SpecsSystem Spec
21 Sep 2009   #15
Zahl

windows 8.1 Pro x64
 
 

Thanks for the heads up, glad to hear its working for you even tho it made me hate you a little
But I think I may have found some info on what might be causing my Powerdvd patch from failing to install. Check this out
Msiexec bug in windows 7 7600
My System SpecsSystem Spec
22 Sep 2009   #16
UKMedia

Windows 7 Ultimate 64Bit (SP 1)
 
 

Quote   Quote: Originally Posted by Zahl View Post
Thanks for the heads up, glad to hear its working for you even tho it made me hate you a little
But I think I may have found some info on what might be causing my Powerdvd patch from failing to install. Check this out
Msiexec bug in windows 7 7600

lol - Looks like it might be a 64 bit bug only. Is anyone having problems with a 32 bit setup?

UKMedia
My System SpecsSystem Spec
22 Sep 2009   #17
Adrian

 

Quote   Quote: Originally Posted by UKMedia View Post
Hi

I have PowerDVD 7 working on my system but if you upgrade to Windows 7 rather than carry out a clean install, you need to uninstall PowerDVD afterwards, reboot and then re-install.

I've been using PowerDVD 7 to watch BD disks for 2-3 weeks now with no problems, apart from the registration window won't go away.

I also found that I had to do the same with Virtual Clone Drive.

Regards
UKMedia
UK,
Question? Are you ripping blu ray vids to the hard drive?
If so, what are you using?
regards,
Adrian
My System SpecsSystem Spec
22 Sep 2009   #18
UKMedia

Windows 7 Ultimate 64Bit (SP 1)
 
 

Quote   Quote: Originally Posted by Adrian View Post
Quote   Quote: Originally Posted by UKMedia View Post
Hi

I have PowerDVD 7 working on my system but if you upgrade to Windows 7 rather than carry out a clean install, you need to uninstall PowerDVD afterwards, reboot and then re-install.

I've been using PowerDVD 7 to watch BD disks for 2-3 weeks now with no problems, apart from the registration window won't go away.

I also found that I had to do the same with Virtual Clone Drive.

Regards
UKMedia
UK,
Question? Are you ripping blu ray vids to the hard drive?
If so, what are you using?
regards,
Adrian
Hi Adrian

Yes, I use Slysoft AnyDVD to rip, then I create an ISO with Imageburn and mount with Slysoft Virtual Clone Drive.

Regards
UKMedia
My System SpecsSystem Spec
22 Sep 2009   #19
Adrian

 

[quote=UKMedia;279592][quote=Adrian;279449]
Quote   Quote: Originally Posted by UKMedia View Post

Yes, I use Slysoft AnyDVD to rip, then I create an ISO with Imageburn and mount with Slysoft Virtual Clone Drive.

Regards
UKMedia
Uk, have ANydvd just rip an image. It will save you the extra step. After settings, just copy the BD to an image.
Regards,
Adrian
My System SpecsSystem Spec
23 Sep 2009   #20
UKMedia

Windows 7 Ultimate 64Bit (SP 1)
 
 

[quote=Adrian;280371][quote=UKMedia;279592]
Quote   Quote: Originally Posted by Adrian View Post
Uk, have ANydvd just rip an image. It will save you the extra step. After settings, just copy the BD to an image.
Regards,
Adrian
Hi Adrian

I've tried that but don't get a 100% success rate. Although no errors are reported, the movie sometimes hangs. If, on the other hand, I split into three tasks, I don't have that issue.

Have you noticed this problem?

Regards
UKMedia
My System SpecsSystem Spec
Reply

 windows 7 and power dvd 7.3




Thread Tools





Similar help and support threads
Thread Forum
Windows 7 64 Bit System Power loss from Kernel power ID 41 (63)
Within the first five mins of any game or using Netflix, my computer will lose all power. The system does not freeze; the power just goes out like a light. I cannot power my system back on after that point unless I turn the switch from the power supply itself off and then back on, and then I can...
BSOD Help and Support
Shut down computer, remove all power sources, hold down power button
Why does shutting down the computer, removing the AC Adapter, removing the battery (if it is a laptop), and holding down the power button for 30 seconds fix problems in one's computer. I was recently corrected in a post of mine that this does not actually do anything unless one removes the 3 volt...
Hardware & Devices
Missing power state controls in advanced power plan settings
Hi guys, I'm new here and this is my first post. I have an Optiplex 745 running Windows 7 Professional. Normally in the advanced setting section of the power plan option I have the option to change the power state, however all of a sudden these options have just totally disappeared. Any help is...
General Discussion
Computer shuts down like power outtage, Kernel Power Error ID 41
Recently I installed a new game on my computer (Far Cry 3), and after a while playing it, my computer suddenly shut down, just like a power outtage (except the power was not out). After debating with friends, I went more towards a hardware problem rather than a software problem, so I thought...
BSOD Help and Support
Power option PCI express Link State Power Mgmt
Hello, I've done a lot of searches using variations of the above title and came up empty or just plain missed the answer. I'd like to know, if it is not asking too much, the following points: 1. What exactly is the function of Link State Power Management in the Power Options Advanced...
General Discussion
Reducing Power Consumption with Windows 7s Power Manag
More...
News

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:19.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App