Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: DBAN won't auto start, please help!

02 Feb 2014   #1
Dj79794

Windows 7 starter 32bit
 
 
DBAN won't auto start, please help!

Hi,

Apologies if I've posted in the wrong catagory. I've downloaded DBAN to a disc as I want to wipe the HD of my dell Inspiron mini 1012. I've checked the disc and it's got the 7 or 8 files it's supposed to have on it and I've pressed F12 on the start up of the computer and changed the BIOS, no matter what preference I put the bios onto, the dban won't fire up in the USB connected cd. Any ideas?

Thanks in advance

DJ


My System SpecsSystem Spec
.
02 Feb 2014   #2
matts6887

Windows 7 ultimate 64-bit
 
 

Can you tell whether or not it is actually reading the disc?
My System SpecsSystem Spec
02 Feb 2014   #3
Callender

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
Bios settings

Hi,

I had the same problem but a long time ago. From what I remember the solution involved changing IDE to AHCI in Bios then changing it back after Dban finished.

I'll try checking my bios settings and post back in a while.

Change SATA Configuration from AHCI to IDE. Reboot. Then boot again from Dban.

If that doesn't work - do the reverse.

Best not to say "Thanks in advance" as any other forum where I've seen that posted mostly indicates that the question was posted by spammers and time wasters 99% of the time. I'm just saying!
My System SpecsSystem Spec
.

02 Feb 2014   #4
Dj79794

Windows 7 starter 32bit
 
 

I can't tell if its reading the disc or not, as soon as the computer fires up the disc "whirs" for a short period and then stops and the normal start up resumes. I'll look in the bios settings again... It's probably something really simple but very frustrating as I'm not a computer whizz by any means!
My System SpecsSystem Spec
02 Feb 2014   #5
Dj79794

Windows 7 starter 32bit
 
 

I've changed the SATA configuration from AHCI to the only option it gave me which was ATA, the computer then wouldn't start and kept going into repair mode. It's doing my head in!!!
My System SpecsSystem Spec
02 Feb 2014   #6
Callender

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
Dban usage

I suppose you know that you burn Dban to USB then once you've got the Bios settings sorted you plug in the USB - boot to Bios and use whatever settings that exist to boot from the USB next boot. In other words there will be settings to change device boot order and the USB should come first. Otherwise there might be an option to over-ride boot settings and boot to the USB for the next boot only. When you switch the computer on you should be seeing the Dban splash screen. If you don't see that - it's not working!

You should see something like this for Sata configuration:

Name:  bios.jpg
Views: 19
Size:  29.7 KB

Something like this for Dban when it boots.

EDIT: Just read your post properly and you're using a cd. Suggest burning yo USB and use that instead.

Name:  dban-splash.jpg
Views: 20
Size:  39.1 KB


My System SpecsSystem Spec
02 Feb 2014   #7
Dj79794

Windows 7 starter 32bit
 
 

I get similar to the first screen, at the top I go into the "boot" screen, I've selected the following in the order;
USB Storage
!CD/DVD/BD-ROM
+Hard drive
network boot

The icons, i.e the exclamation mark and the "plus" sign are as they are displayed exactly too.
In the advanced menu I can see "SATA Operation" which only gives me the option of default AHCI or ATA.
My System SpecsSystem Spec
02 Feb 2014   #8
Callender

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
Try this

I take it that you created a bootable Dban USB? It's the best way.

Install DBAN to a USB Flash Drive using Windows | USB Pen Drive Linux

Make sure that the USB is plugged in before changing bios settings.

Anyway try the AHCI option first. Save the settings before exiting Bios. Then reboot. It should boot to USB and if Dban can't run you should see a message about this.

In that case try only other existing option in your Bios settings - ATA
My System SpecsSystem Spec
02 Feb 2014   #9
Dj79794

Windows 7 starter 32bit
 
 

Ah.... I've created a DBAN disc which is in an external CD rewritable drive which connects via the USB port. Could that possibly be the reason then, that it's not actually on a Usb stick?
My System SpecsSystem Spec
02 Feb 2014   #10
Callender

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
Probably

In my experience booting from cd's in external drives is problematic in that the correct drivers might not load and so on. If you use a bootable USB instead it gets around the problem.

I think that you could safely run Dban on a CD from a built in drive but even so USB is a better way.
My System SpecsSystem Spec
Reply

 DBAN won't auto start, please help!




Thread Tools




Similar help and support threads
Thread Forum
DBAN help
I have a few questions actually, i'm hoping most can be answered in this one thread. First, i ran DBAN and it hung at pci sysfig. google told me it was the card reader and to disable it in the bios setup, however i cannot find that option. can you tell me what to look for? Second, i am...
Backup and Restore
Auto start of Win 7 not happening
Hello On boot the DOS lookalike screen stops and waits for me to allow 'Recovered Win 7 Ultimate screen. It will boot from there but I have to waut 30 seconds. How do I reconfigure so it boots directly into Windows?...Thx
Installation & Setup
auto start
i am using windows7 64bit and my auto start does not work when i install a dvd
General Discussion
Auto shut down / start up
Hi all, I have just upgraded from a Dell Lattitude 610 WinXP Pro Bios A06 to a Dell Studio 1558 Win7 pro Bios A11. My question is this. Using my old setup I was able to start my computer at a predetermined time from a complete shutdown using setting in the power management that was in the...
General Discussion
Auto Start & Shut Down
Here's what's going on. I want to leave my PC torrenting overnight, but I have to turn off my PC before I leave. So, I want to start a timer that will automatically start my PC up at 11:30, and shutdown at 5:30. Simple? Well, I have afew issues. 1: The login screen. I have no password on my...
General Discussion
Auto Start my PC
hey there Does anyone know of a way that you can set your win 7 pc so that it will auto start to a time that the user presets??
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:01.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App