Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: "Teamviewer.exe - Bad Image" error upon Windows 7 startup/login

20 Oct 2015   #1
tipman

Windows 7 Enterprise x64
 
 
"Teamviewer.exe - Bad Image" error upon Windows 7 startup/login

I'm currently using TeamViewer 10, though this happened with TeamViewer 9 too.
This error message pops up appears when I log into Windows 7, but not does appear again after hitting OK.
This is still problematic because TeamViewer does not start until the error is clicked, so I cannot remotely restart my computer.

I've attached a jpg with the error, which reads:

"TeamViwer: TeamViewer.exe - Bad Image

C:\Windows\SysWOW64\api-ms-win-downlevel-shell32-l1-1-0.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."

I have tried uninstalling/reinstalling TeamViewer, but it does not resolve the issue.

Thanks for your help!
James




Attached Images
"Teamviewer.exe - Bad Image" error upon Windows 7 startup/login-bad-image.jpg 
My System SpecsSystem Spec
.
20 Oct 2015   #2
UsernameIssues

W7 Pro SP1 64bit
 
 

Run option two in this tutorial: SFC /SCANNOW Command - System File Checker
My System SpecsSystem Spec
20 Oct 2015   #3
tipman

Windows 7 Enterprise x64
 
 

I ran sfc /scannow 4 times, and got the response:
"Windows Resource Protection found corrupt files but was unable to fix some of them."

I've pulled the ones pertaining to the scans from CBS.log through Option 3 and attached them below.


Attached Files
File Type: txt sfcdetails.txt (241.3 KB, 2 views)
My System SpecsSystem Spec
.

20 Oct 2015   #4
UsernameIssues

W7 Pro SP1 64bit
 
 

I have asked NoelDP to stop by your thread. He might be able to help you get those files fixed.
My System SpecsSystem Spec
20 Oct 2015   #5
tipman

Windows 7 Enterprise x64
 
 

Thank you for your help, UNI!
My System SpecsSystem Spec
21 Oct 2015   #6
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Here's the summary from the SFC scan...
Code:
2015-10-20 15:53:44, Info                  CSI    00000e8e [SR] Repairing 8 components
2015-10-20 15:53:44, Info                  CSI    00000e8f [SR] Beginning Verify and Repair transaction
2015-10-20 15:53:44, Info                  CSI    00000e91 [SR] Cannot repair member file [l:34{17}]"netcenter.dll.mui" of Microsoft-Windows-NetworkCenter.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-10-20 15:53:44, Info                  CSI    00000e93 [SR] Cannot repair member file [l:32{16}]"netshell.dll.mui" of Microsoft-Windows-Netshell-Mui.Resources, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-10-20 15:53:44, Info                  CSI    00000e95 [SR] Cannot repair member file [l:30{15}]"prnfldr.dll.mui" of Microsoft-Windows-Printing-ClassInstallerAndPrintUI-PRNFLDR.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-10-20 15:53:44, Info                  CSI    00000e97 [SR] Cannot repair member file [l:12{6}]"sc.exe" of Microsoft-Windows-ServiceControllerCommandLineTool, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-10-20 15:53:44, Info                  CSI    00000e99 [SR] Cannot repair member file [l:24{12}]"tscfgwmi.dll" of Microsoft-Windows-TerminalServices-WMIProvider, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-10-20 15:53:44, Info                  CSI    00000e9b [SR] Cannot repair member file [l:46{23}]"System.Transactions.dll" of System.Transactions, Version = 6.1.7601.18410, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:b77a5c561934e089}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-10-20 15:53:44, Info                  CSI    00000e9d [SR] Cannot repair member file [l:78{39}]"api-ms-win-downlevel-shell32-l1-1-0.dll" of Microsoft-Windows-DownlevelApisets-Shell, Version = 7.1.7601.16492, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-10-20 15:53:44, Info                  CSI    00000e9f [SR] Cannot repair member file [l:18{9}]"ATL90.dll" of Microsoft.VC90.ATL, Version = 9.0.21022.8, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, hash mismatch
I'll post a fix protocol when I can get to it - hopefully tonight.
My System SpecsSystem Spec
21 Oct 2015   #7
tipman

Windows 7 Enterprise x64
 
 

Thanks for looking into this, and I eagerly await the fix.
My System SpecsSystem Spec
22 Oct 2015   #8
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

I've uploaded a file - tpmaa.zip - to my OneDrive at Noel's OneDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)

Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\tpmaa
hit the enter key - if you get a 'Not Found' error try
DIR D:\tpmaa
or
DIR E:\tpmaa

The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\tpmaa <drive>:\windows\winsxs /y /i /s /v /h

(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
My System SpecsSystem Spec
22 Oct 2015   #9
tipman

Windows 7 Enterprise x64
 
 

Unfortunately sfc /scannow still says that there are corrupt files that Windows Resource Protection was unable to fix.
Should I try going through your instructions again?

Here is the full zipped CBS.log file, and second file for details pertaining to the scan only.

Edited to add: I am still getting the same error message after logging in.


Attached Files
File Type: txt sfcdetails.txt (559.1 KB, 1 views)
My System SpecsSystem Spec
23 Oct 2015   #10
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Hm - seems I missed a couple?..
Code:
2015-10-22 20:39:56, Info                  CSI    00000348 [SR] Repairing 2 components
2015-10-22 20:39:56, Info                  CSI    00000349 [SR] Beginning Verify and Repair transaction
2015-10-22 20:39:56, Info                  CSI    0000034b [SR] Cannot repair member file [l:78{39}]"api-ms-win-downlevel-shell32-l1-1-0.dll" of Microsoft-Windows-DownlevelApisets-Shell, Version = 7.1.7601.16492, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2015-10-22 20:39:56, Info                  CSI    0000034d [SR] Cannot repair member file [l:18{9}]"ATL90.dll" of Microsoft.VC90.ATL, Version = 9.0.21022.8, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope neutral, PublicKeyToken = {l:8 b:1fc8b3b9a1e18e3b}, Type = [l:10{5}]"win32", TypeName neutral, PublicKey neutral in the store, hash mismatch
I'll post another fix later.
My System SpecsSystem Spec
Reply

 "Teamviewer.exe - Bad Image" error upon Windows 7 startup/login




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
During startup I always receive "Windows failed to start" error
I just built a new pc two days ago and have noticed every single time on startup I receive the "Error: Windows failed to start. A recent hardware or software change might have caused the issue after you install Windows Updates" error, the keyboard doesn't turn on during boot so I can't access the...
Software
"Windows Loading Files" infinite loop, Can't Boot USB "disk error"
hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping pc's on - booting - then "Windows Loading Files" - restart it's infinite :cry: i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time...
General Discussion
Stuck on "Start Windows normally" and "Launch startup repair"
I am stuck on "Start Windows normally" and "Launch startup repair" When I choose "Start Windows Normally",it gives me blue screen with the following error:Unmountable_Boot_Volume.On "Launch startup repair" I am stuck on the Windows 7 wallpaper with cursor and can't even open Cmd trough...
General Discussion
Cant find "System Image" of 36 GB but its shows on "Manage Disc Space"
Dear Experts, I have created windows image on Drive F: but delete it after some time manually due to some space prob. But while backup shows about 40 GB only few GB space got free after deletion. When i try to again take the the backup using windows 7 backup & restore option, its still shows 35...
Backup and Restore
Win7 pro startup error "Boot MGR missing"/"Operating System Not Found
I just upgraded from Vista Home Premium to Win7 professional x64 hoping to fix the above mentioned problem. After a complete re-install Im getting the same errors. Im not sure of the proper terminology here, but during startup the computer does a scan of all hardware and "Volume 0" has a...
Installation & Setup
"Return computer to factory condition" or "Use A System Image Crea..."
Which one should I do? I originally wanted to just do "Return computer to factory condition" but Theog just suggested "Use A System Image Created Earlier." I have no idea what to do. So confusing! :confused:
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App