Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: How do I assign drive letter in Partition Wizard

02 Feb 2010   #11


Susan I'm assuming from your other thread that you have now deleted all partitions on your Acer HD, created new one and lettered it C. Now you can run the file scan.

After that, boot the GWScan uploaded to run full scan. It may autostart without having to set DVd/CD drive to boot first, otherwise do that in BIOS setup. Make sure you Acer HD is set to boot next.

Once you've verified the scan is being run on Acer HD C, then it is safe to also Write Zeros to HD to get it cleanest possible for Win7 install. But if you choose to do this, you'll need to use Drive Tools to create New partition to format, when you boot Win7 DVD to do a Custom Install using the tutorial I posted earlier.

My System SpecsSystem Spec
02 Feb 2010   #12


My System SpecsSystem Spec
03 Feb 2010   #13

Windows 7 and Vista

thanks for replies problem sorted now thanks

My System SpecsSystem Spec


 How do I assign drive letter in Partition Wizard

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Unable to assign drive letter to HD partition?
Hi, Run into an issue with a hard drive showing 3 partitions, but I can't assign a drive letter to it. Background: It was running Win 7 Pro 64-bit, but was having occasional issues with blue screening. I've pulled the hard drive from that PC and have it hooked to my own (also Win 7 Pro 64)...
Hardware & Devices
Can't assign Drive Letter.
Iv made it work befor but i cant find on google why it isnt working this time. these where both bootable os's of windows or google chrome and now i cant reset them back to flash drives they arent recognized in my computer but do show up in Disk Management im looking at drive 2 and 3 ...
Hardware & Devices
Assign another drive letter than original (D:) to Recovery partition?
Hello, having to configure a new HP laptop with pre-installed Win7, I need to create some extra logical drives to organize things better. Unfortunately, the usual OEM scenario applies: all four possible primary partitions are already happily taken by the manufacturer: SYSTEM (no drive...
General Discussion
Can I assign a letter to the SYSTEM partition?
Hi, I have a new HP laptop running Windows 7 Home Premium 64 bits. As I am about to tinker with the partitions, I wanted to save the MBR and the first 3 (FAT32) / 7 (NTFS) sectors of each partition, but the software I'm using to do this won't show me any info for the small active partition...
General Discussion
Want to Assign a drive letter to a partitioned device but the letter i
Want to Assign a drive letter to a partitioned device but the letter is not in the list I created a partitioned drive I went to assign letter G but I don't see it in the list. no drive is using the letter G I do believe that some USB is using letter G, but I don't see my USBs ( see image) ...
General Discussion
Can't assign letter to a partition
I have two partitions on a 500GB drive (one for windows boot, one for files only)I've just reinstalled win7 and I realised that the partition for files is not shown in My Computer. I opened Computer Management and clicked on Diskmanagement. As you can see on the picture the partition it doesn't...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:15.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App