Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Daemon Tools setup problems...

18 Apr 2009   #1
Bryce

Vista Ultimate x64, Windows 7 RC 7100
 
 
Daemon Tools setup problems...

I tried installing daemon tools on Win7 7077 64bit and when it asks to restart I do but once it reboots it starts the whole setup again and doesn't continue from where it was when it asked to restart to finish the install.


My System SpecsSystem Spec
.

18 Apr 2009   #2
johngalt

 

DT free is using the old SPTD 1.56 - if you go to their website you'll see that the Pro and Advanced versions have a newer SPTD driver, 1.58, that is supposed to work with Win7 - but I tried using the SPTD 1.58 and then installing DT Free and it still did not work effectively for me, and in fact, it caused me to format and reinstall build 7077 from scratch (previously I had upgraded from 7068).

You can try what I tried, but be prepared in case it starts hosing your system....

Except for all the protection bypasses, Virtual Clone Drive (available from http://www.slysoft.com/en/download.html (v5.4.2.5) or from http://fileforum.betanews.com/detail...e/1224002998/1 (v5.4.2.8 Beta)) works like a champ - I am using the Beta 5428 and it rocks....
My System SpecsSystem Spec
18 Apr 2009   #3
harmann

Win7 x64 7232 // XP x86 SP3
 
 

I got Daemon tools working fine. Here's what I did:
Get the SPTD x64 1.58 driver here. Install and restart.
Then download DT lite, install. After that it's gonna "update virtual devices" which took like 10 minutes for me. Just let it finish and you should be fine.
My System SpecsSystem Spec
.


19 Apr 2009   #4
nechan

win7.7100x64
 
 

haven't had any problems installing the new version.
Either you install the new pro version, deinstall daemon tools after the installation and install an older version (yeah it sounds stupid but it works),
or you download the SPDT 1.58 seperatly and install an older daemon tools lite version after it.
you might need the troubleshoot compatibility mode to add more admin rights.

Windows 7 Blog | Daemon Tools unterst├╝tzt Windows 7
My System SpecsSystem Spec
19 Apr 2009   #5
ikilledkenny

Windows 7 Professional, Windows Longhorn 4074
 
 

When you install Daemon Tools, it needs to restart your computer, as you know. When you restart, it can't install because it doesn't have the Administrative Privileges. He wants to how to get it to start with the correct privileges so it can install.

I did this same thing a long time ago and just gave up, burnt whatever it was I needed to a CD and went from there. I found it much easier than going through all the trouble.
My System SpecsSystem Spec
19 Apr 2009   #6
nechan

win7.7100x64
 
 

you don't get it.

There is a new version of SPTD (Version 1.58) Download here: DuplexSecure - Downloads
Install new SPTD and restart your PC.

Download Daemon Tools Lite v 4.30.3 and install Daemon Tools.

If you would read a bit on the official daemontools homepage you could read:
Quote:
DAEMON Tools Pro Version 4.30.0305 is released
What's new in this version:
Image Editor;
Windows 7 beta supporting (SPTD 1.58);
and if you take a look at those screenshots here Windows 7 Blog | Daemon Tools unterst├╝tzt Windows 7
you can see it works
My System SpecsSystem Spec
19 Apr 2009   #7
ikilledkenny

Windows 7 Professional, Windows Longhorn 4074
 
 

Quote   Quote: Originally Posted by ikilledkenny View Post
I did this same thing a long time ago and just gave up, burnt whatever it was I needed to a CD and went from there.
Sorry, haven't been to DT in a while.
My System SpecsSystem Spec
19 Apr 2009   #8
johngalt

 

I tried it last time when I had upgraded from 7068 to 7077 *and* I had Virtual Clone Drive installed and it gave me fits - it ran but was excruciatingly slow, and when loading a BD it sat there forever loading....locked the system up, although I did not wait longer than about 2 minutes.

I may give this a shot again, but I am wondering about the 64bit compatibility, and also wondering if VCD was also causing it fits....
My System SpecsSystem Spec
19 Apr 2009   #9
ikilledkenny

Windows 7 Professional, Windows Longhorn 4074
 
 

You could just try using VirtualCloneDrive
My System SpecsSystem Spec
19 Apr 2009   #10
johngalt

 

IKK - please read all the posts before replying -

Quote   Quote: Originally Posted by johngalt View Post
DT free is using the old SPTD 1.56 - if you go to their website you'll see that the Pro and Advanced versions have a newer SPTD driver, 1.58, that is supposed to work with Win7 - but I tried using the SPTD 1.58 and then installing DT Free and it still did not work effectively for me, and in fact, it caused me to format and reinstall build 7077 from scratch (previously I had upgraded from 7068).

You can try what I tried, but be prepared in case it starts hosing your system....

Except for all the protection bypasses, Virtual Clone Drive (available from SlySoft Download | AnyDVD, CloneDVD, CloneCD, GameJackal, Any DVD, Clone DVD, Clone CD, Game Jackal (v5.4.2.5) or from Virtual CloneDrive Free Download and Reviews - Fileforum (v5.4.2.8 Beta)) works like a champ - I am using the Beta 5428 and it rocks....
My System SpecsSystem Spec
Reply

 Daemon Tools setup problems...




Thread Tools





Similar help and support threads
Thread Forum
Daemon Tools
Does someone can tell me whats wrong . Daemon Tools crash every time if i want to open it .If i shut down my external hd its start to work and the same thing is with Magic ISO.Do i need to change the driver letter or something like that:)
Software
Daemon tools alternative?
A lot of users here say not to use Daemon tools because it can cause BSOD. But they never say what alternative to use? Windows 7 64 bit Thanks -User
Software
Is there any sofware like daemon tools ???
hi dears, Is there any sofware like daemon tools to mount an image ??? thanx in advance.... :sarc:
Software
Daemon Tools?
So I downloaded Daemon Tools Lite... their site says it supports Windows 7 and all. Well I go to install it, and Windows says it has known compatibility issues. I ignored it and installed it, and it seems to work fine. So what's up with the warning? Is it because Daemon Tools doesn't...
Software
Daemon Tools Lite
Hi Guys I tried installing Daemon Tools Lite from their website .. but while setup was running I got a pop up saying there were compatibility issues with this software and windows 7 .. so I got scared and clicked cancel. What do I do now ? I really need Daemon Tools :( Thanks
Software

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

ę Designer Media Ltd

All times are GMT -5. The time now is 14:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App