Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: sisoft sandra 2010 processor arithmetic benchmark

06 Apr 2010   #1
totalguy

windows ultimate 7 64 bit
 
 
sisoft sandra 2010 processor arithmetic benchmark

because of crashing problems and no real information to explain why i decided to get sisoft sandra.

when i do a benchmark on processor arithmetic it always freezes up my computer as in the mouse wont move and cant do nothing. this is the same thing that happens with other programs but it is more intermittent there.

i ran the test several times with the same freezing happening all the time. i run other tests and none of them do this but some tests just seem to go on forever as if they are stuck in a loop. maybe its the program i dont know.

before the freeze my 1st core goes to 100% then seconds later freeze and i have to reset the computer.

i ran prime95 before i got ssisoft sandra and it ran no problems which seemed to me it wasnt doing a thorough enough test. the computer isnt overheating, i have auto fan control and when it gets to ovet 50c the fan goes on max and i can tell by the sound and it only did that on prime95


My System SpecsSystem Spec
.
06 Apr 2010   #2
Mellon Head

Win 7 Pro x64/Win 10 Pro x64 dual boot
 
 

Normally, Sandra's benchmarks DO freeze the mouse and keyboard for a while. The progress meter will eventually update to a higher percentage, and then it will freeze again. It does this until it's finished the test.

The reason for this is that the results are more accurate if the CPU isn't wasting cycles on extra stuff like the mouse, etc. Sandra minimizes the CPU time of everything it can, so that it can concentrate on the test.

My quad core can take up to 5 minutes to run some of the tests, esp. the memory ones. How long is your machine locking up on you?
My System SpecsSystem Spec
07 Apr 2010   #3
totalguy

windows ultimate 7 64 bit
 
 

it locks up pretty much straight away and because only the first core was upto 100% surely the other cores would allow it to work on mouse movement. when i used prime95 the cpu load was 100% for all cores and i could still move the mouse without problems i will retry the test now for 10 minutes and see what happens
My System SpecsSystem Spec
.

07 Apr 2010   #4
totalguy

windows ultimate 7 64 bit
 
 

you were right i let the program create a full report then i looked at it took some time as it was very long the only problem i can see is this:

Cannot use Large Memory Pages due to lack of privileges.

this appears on memory and processor elements that were tested
My System SpecsSystem Spec
07 Apr 2010   #5
Mellon Head

Win 7 Pro x64/Win 10 Pro x64 dual boot
 
 

Quote   Quote: Originally Posted by totalguy View Post
you were right i let the program create a full report then i looked at it took some time as it was very long the only problem i can see is this:

Cannot use Large Memory Pages due to lack of privileges.

this appears on memory and processor elements that were tested
Glad it worked. The memory page thing is pretty normal. I'm not sure it's an error. It's mostly just a flag telling you that it couldn't use large pages. I've never figured out whether there's a big difference or not so I've never bothered to enable it.
My System SpecsSystem Spec
07 Apr 2010   #6
totalguy

windows ultimate 7 64 bit
 
 

i found this page Lock pages in memory? so i followed what it said to do and i did see a difference in the results however im still getting the warning.

there is a warning on the properties of this policy but i think that would only apply if you had a little amount of ram where as i have 4gb installed.

ive attached pictures of before and after to show the difference its not a hige difference but it is an improvement im just wondering if there is something else i can do as this error still appears.


Attached Thumbnails
-before.jpg   -after.jpg  
My System SpecsSystem Spec
07 Apr 2010   #7
Mellon Head

Win 7 Pro x64/Win 10 Pro x64 dual boot
 
 

The differences are actually pretty minor. I remember looking this up a while ago, and there was a reason that I didn't enable it. Might have been a compatibility issue with something, I can't remember now. It might be worth doing a little research about enabled vs disabled. Maybe some of the other guys here know more about that one.

Edit: I guess it would have helped if I had noticed the link in your post. IIRC, lock memory pages benefits a server more than a desktop.
My System SpecsSystem Spec
07 Apr 2010   #8
totalguy

windows ultimate 7 64 bit
 
 

i did a bit of googling and this warning came up a lot and from what ive found my memory efficiency is a lot higher than most peoples systems so im happy that its not a problem. trouble is now i still have my crashing system i still have to resolve.
My System SpecsSystem Spec
07 Apr 2010   #9
Mellon Head

Win 7 Pro x64/Win 10 Pro x64 dual boot
 
 

Is your RAM voltage at spec? Corsair's spec, not the auto setting on the motherboard. That might do it.
My System SpecsSystem Spec
07 Apr 2010   #10
totalguy

windows ultimate 7 64 bit
 
 

im not sure what to do there ill find a link to the ram then you can tell me if you know lol

here we go http://www.ebuyer.com/product/166995
My System SpecsSystem Spec
Reply

 sisoft sandra 2010 processor arithmetic benchmark




Thread Tools




Similar help and support threads
Thread Forum
Transilvanian arithmetic.
I wanted to transfer a 12GB folder to a flash drive with 14GB free space. But the system told me that there was not enough space. How come ??
General Discussion
New Benchmark-gpu
While this program is not build for this, I think its interesting. Download Lightworks here: Downloads It's a free video editor that is very powerful. But were going to use its gpu tests it has built in. It is a very quick install. Once you got it, open it and click system settings on...
Benchmarks
SSD WEI benchmark
I have a 60GB Corsiar ForceGT SSD as boot drive. Old setup: AMD 1090T/M4A87TD EVO, the WEI gave it 7.9. New setup: Intel 3570K/MSI Z77A-G45, WEI now gives it 5.9 When setting it up in my new system, I made sure it was attached to a 6GB Sata port, AHCI was set in UEFI and trim was enabled . I...
Performance & Maintenance
Bugcheck 116 & B4, Sisoft Lockup
I'm posting this from work, so I don't have the memory dumps from the BSODs but I will attempt to post them when I get home. I'm hoping someone will have seen a similar problem and now how to resolve it. Up until 5 days ago I had XP64 installed on my primary system. It worked perfectly, except...
BSOD Help and Support
0x50 during Far Cry 2 benchmark
Hello, sevenforums 0x00000050 Page_Fault_In_Non-Paged_Area during Far Cry 2 benchmark. Clean install Windows 7 OEM. Installed drivers then far cry 2. My Windows 7: - 64 bit - OEM - Age hardware 1 year
BSOD Help and Support
Sisoft Sandra 2011 Trial Not responding!
Hi I'm using W7 Ultimate 64 bit and I could not start Sisoft Sandra Lite 2011a (17.20). The process of installation finishes without any problems, but when I run Sisoft Sandra nothing happens. It shows start screen, but after that nothing happens. When I click on Sisoft Sandra window, it said...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App