Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Stereo Mix doesn't work


05 Nov 2010   #1

Windows 7 Ultimate x64
 
 
Stereo Mix doesn't work

I have a Intel D946GZIS mainboard, I downloaded file AUD_allOS_D20001.0x_PV_IDTGUI_v105_Legacy.exe on Intel Website for Audio driver. After setup it, I enabled the Stereo Mix on Recording Devices list. But when I set it as default device, it doesn't work.

Whether I pluged the microphone jack in , the IDT Audio Control Panel still show no jack connected. I think this driver doesn't work well in Windows 7

What should I do to solve this problem?. Thanks a lot!


My System SpecsSystem Spec
.

05 Nov 2010   #2

Windows 7, 64 bit Home SP1, Win 8.1.1 Pro 64 bit
 
 

I have an Intel DP35DP motherboard and I tried to install the IDT drivers from the Intel site on my Win 7 64 bit system and they wouldn't install. I even tried installing in Vista compatibility mode, as I had it working in Vista, but they would not install. When I upgraded to Win 7, I installed a SoundBlaster Xfi Fata1ty sound card installed but it was interferring with my recording studio program (Sonar) and I needed something else for Windows sound. The IDT (SigmaTel) drives would not install but fortunately I had an HT Omega Striker 7.1 sound card and I installed that and got sound working in Win 7.

Updated: Here is something from a different thread on installing the Intel drivers. Posts there report it works. Try or use it at your own risk.


Step 1:

Ok, first you need to copy the sound driver files
off the cd that came with your motherboard into any folder on your computer.




Step 2:

Second, navigate to the folder you pasted the drivers in.
Then go to IDT, then WDM and lastly Vista.

Step 3:

Next, open both ---_WRT_---_--_--.INI files in notepad.
For example mine were called, "ECS_WRT_202_G2_DY.INI" and "ECS_WRT_206_G2_DY.INI"
Under the [Models]category remove all occurences of "&SUBSYS_--------"
For example it should read,"
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7680=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7680=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this"



Now save both files and start the copied installer, and it should work
My System SpecsSystem Spec
06 Nov 2010   #3

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by fireberd View Post
I have an Intel DP35DP motherboard and I tried to install the IDT drivers from the Intel site on my Win 7 64 bit system and they wouldn't install. I even tried installing in Vista compatibility mode, as I had it working in Vista, but they would not install. When I upgraded to Win 7, I installed a SoundBlaster Xfi Fata1ty sound card installed but it was interferring with my recording studio program (Sonar) and I needed something else for Windows sound. The IDT (SigmaTel) drives would not install but fortunately I had an HT Omega Striker 7.1 sound card and I installed that and got sound working in Win 7.

Updated: Here is something from a different thread on installing the Intel drivers. Posts there report it works. Try or use it at your own risk.


Step 1:

Ok, first you need to copy the sound driver files
off the cd that came with your motherboard into any folder on your computer.




Step 2:

Second, navigate to the folder you pasted the drivers in.
Then go to IDT, then WDM and lastly Vista.

Step 3:

Next, open both ---_WRT_---_--_--.INI files in notepad.
For example mine were called, "ECS_WRT_202_G2_DY.INI" and "ECS_WRT_206_G2_DY.INI"
Under the [Models]category remove all occurences of "&SUBSYS_--------"
For example it should read,"
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7680=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7680=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this"
Now save both files and start the copied installer, and it should work
Yes, I also tried that way and still nothing....
According to you, I should buy a new PCI Audio Card?
My System SpecsSystem Spec
.


06 Nov 2010   #4

Windows 7, 64 bit Home SP1, Win 8.1.1 Pro 64 bit
 
 

A separate sound card is what I used, however I already had the card so it didn't cost me any extra money.
My System SpecsSystem Spec
Reply

 Stereo Mix doesn't work




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:02 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33