New
#1
Realtek win7 x64 Tried it all will not install Get BSOD
Ok I have tried every thing i can find here and on google to get my sound to work
It normally crashes after the restart of the installer. I have tried all Realtek HD Audio drivers I can find : V2.28, 2.55, and 2.56 (first 2 are from ASUS)
I have an Asus Cm5570 AP-006 Desktop. It has a built in Realtek high definition audio. After every uninstall (to install a new version I have uninstalled and then install bothed manually and automatic). I have tried to install in safe mode as well.
Im lost. I have also done a repair install of Windows 7 64bit as well.
Regardless of version installed I get the same BSODCode:icrosoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\Windows\Minidump\010911-26769-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available WARNING: Whitespace at end of path element Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Kernel Version 7600 MP (4 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Personal Built by: 7600.16617.amd64fre.win7_gdr.100618-1621 Machine Name: Kernel base = 0xfffff800`03203000 PsLoadedModuleList = 0xfffff800`03440e50 Debug session time: Sun Jan 9 19:00:58.769 2011 (UTC - 8:00) System Uptime: 0 days 0:02:14.845 Loading Kernel Symbols ............................................................... ................................................................ ...................... Loading User Symbols Loading unloaded module list .... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck A, {60, 2, 1, fffff8000327cc9c} Unable to load image \SystemRoot\system32\drivers\RTKVHD64.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for RTKVHD64.sys *** ERROR: Module load completed but symbols could not be loaded for RTKVHD64.sys Probably caused by : RTKVHD64.sys ( RTKVHD64+2878dc ) Followup: MachineOwner --------- 2: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: 0000000000000060, memory referenced Arg2: 0000000000000002, IRQL Arg3: 0000000000000001, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: fffff8000327cc9c, address which referenced memory Debugging Details: ------------------ WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800034ab0e0 0000000000000060 CURRENT_IRQL: 2 FAULTING_IP: nt!KeWaitForSingleObject+13c fffff800`0327cc9c f00fba2e07 lock bts dword ptr [rsi],7 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0xA PROCESS_NAME: System TRAP_FRAME: fffff880031bd810 -- (.trap 0xfffff880031bd810) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=00000000000021c3 rbx=0000000000000000 rcx=0000000000000002 rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000 rip=fffff8000327cc9c rsp=fffff880031bd9a0 rbp=0000000000000000 r8=fffff78000000008 r9=0000000000000000 r10=0000000000000000 r11=fffff88002f63180 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei pl zr na po nc nt!KeWaitForSingleObject+0x13c: fffff800`0327cc9c f00fba2e07 lock bts dword ptr [rsi],7 ds:da10:00000000`00000000=???????? Resetting default scope LAST_CONTROL_TRANSFER: from fffff80003272ca9 to fffff80003273740 STACK_TEXT: fffff880`031bd6c8 fffff800`03272ca9 : 00000000`0000000a 00000000`00000060 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx fffff880`031bd6d0 fffff800`03271920 : ffff0800`00000011 00000000`00000000 fffff880`031bd8e0 00000000`00000000 : nt!KiBugCheckDispatch+0x69 fffff880`031bd810 fffff800`0327cc9c : 00000000`00000000 00000000`00000000 fffff880`086e38ac 80000000`00000000 : nt!KiPageFault+0x260 fffff880`031bd9a0 fffff880`086e38dc : 00000000`00000000 fffff880`00000000 00000000`00000000 00000000`00010200 : nt!KeWaitForSingleObject+0x13c fffff880`031bda40 00000000`00000000 : fffff880`00000000 00000000`00000000 00000000`00010200 00000000`00000000 : RTKVHD64+0x2878dc STACK_COMMAND: kb FOLLOWUP_IP: RTKVHD64+2878dc fffff880`086e38dc ?? ??? SYMBOL_STACK_INDEX: 4 SYMBOL_NAME: RTKVHD64+2878dc FOLLOWUP_NAME: MachineOwner MODULE_NAME: RTKVHD64 IMAGE_NAME: RTKVHD64.sys DEBUG_FLR_IMAGE_TIMESTAMP: 4d1c020a FAILURE_BUCKET_ID: X64_0xA_RTKVHD64+2878dc BUCKET_ID: X64_0xA_RTKVHD64+2878dc Followup: MachineOwner ---------
Here are my drivers: attached
Last edited by evocube; 09 Jan 2011 at 20:47.