Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Intel IDT Audio Driver will not install


11 Jan 2009   #1

Windows 7 beta x64
 
 
Intel IDT Audio Driver will not install

I am trying to install the latest audio driver for the Intel® Desktop Board DG965SS under Windows 7 Beta x64.

IntelĀ® Desktop Board DG965SSĀ Audio: IDT* 92XX Driver

However, when it goes to configure the driver I get the error:
Device Object not present, restart the system and run setup again.

I get this running the installer in normal and compatibility modes.

Any help on how to get around this error, or a point in the right direction for the correct driver would be greatly appreciated. Merci beaucoup !


My System SpecsSystem Spec
.

14 Jan 2009   #2

Windows 7 Beta 1 7000 , Windows Vista, Windows XP(all 32-bit)
 
 

When i checked the Hardware manager, Windows 7 installed mine as a High Definition Audio Device, But i haven't tried to get Surround sound yet
My System SpecsSystem Spec
15 Jan 2009   #3

Windows 7 beta x64
 
 

Yeh, thats what it did for mine as well...which is fine to just hear sound.
However, I need Stereo Mix, Line In, Mic, etc. that requires an audio driver

I tried the RealTek driver, but that did nothing, as expected. :[
My System SpecsSystem Spec
.


07 Jun 2009   #4

Windows 7
 
 
Solution

Well, i found a relatively easy fix....
Step 1:
Ok, first you need to copy the sound driver files
off the cd that came with your motherboard into any folder on your computer.

For example, "D:\Sound\IDT"

Step 2:
Second, navigate to the folder you pasted the drivers in.
Then go to IDT, then WDM and lastly Vista.


Step 3:
Next, open both ---_WRT_---_--_--.INI files in notepad.
For example mine were called, "ECS_WRT_202_G2_DY.INI" and "ECS_WRT_206_G2_DY.INI"
Under the [Models] category remove all occurences of "&SUBSYS_--------"
For example it should read,"
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7680=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7680=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this"


Now save both files and start the copied installer, and it should work.
My System SpecsSystem Spec
26 Aug 2009   #5

Win7 64
 
 

I registered for the forum just to say thanks T11230. Your tip worked, thanks!
My System SpecsSystem Spec
17 Sep 2009   #6

Windows 7 Ultimate / Windows 8 Build
 
 

thanks T11230
My System SpecsSystem Spec
14 Oct 2009   #7

windows 7
 
 

I also registered for the forum to say thanks T11230, and with your help make the IDT audio drivers work for the Intel DP965LT:
In the [Vista] folder of the decompressed driver ( I used AUD_allOS_D20001.0x_PV_IDTGUI_v105_Legacy.exe), look for a file "Stwrt.ini", then edit as T11230 instructions: delete [&subsys_######] but leave the "=" and next characters, example: HDAUDIO\FUNC_01&VEN_8384&DEV_7680=I3.INI.
Then reset the PC AND reconfigure your audio settings because in the first boot you are not going to get any sound (don't panic).
My System SpecsSystem Spec
14 Nov 2009   #8

window 7
 
 

i also register to say thanks man.....

people who r still unable to configure there 5.1 system...

1) Repeat the steps told by t11230 and fyrigoyeno

2)then configure ur windows sound panel (control panel-->sound->manage audio device-->select the speker icon-->then click on configure -->set to 5.1 thats all)
My System SpecsSystem Spec
13 Dec 2009   #9

Windows 7
 
 

I also register to say thanks "T11230"

I had no more sound since I migrated my HP Pavillon dv7 2130 from Vista to Windows 7. No Media application worked anymore.

Following "T11230" advices, I've modified "WRT_M*_*.INI" files located at "C:\Program Files\IDT\WDM".

Now everything is working fine.

Many thanks !

Hopping Microsoft will fix this problem !

Mick
My System SpecsSystem Spec
18 Dec 2009   #10

Windows Vista Ultimate x64
 
 

I tried T11230`s and others instructions and still nothing... still playing on 2 stereo chanels...
I have windows vista ultimate x64 on my HP Pavilion dv5-1101en, and i have the same problem with outputing 5.1 sound.
In my IDT High Definition Audio Driver i erased the "&SUBSYS_--------" phrase from
stwrt64.ini
stwrt.ini
WRT_M4-1.ini
WRT_M4-2.INI
WRT_M4-3.INI
WRT_M4-4.INI
.
.
.
WRT_M8-2.INI

I tried multiple combination for almost 10 hours... I became desperate... I spent 400 euros on my 5.1 samsung sound system and all I can hear is sterea sound...
Please help me!
My System SpecsSystem Spec
Reply

 Intel IDT Audio Driver will not install




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:43 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33