4.1 audio only coming out of rear right speaker


  1. Posts : 9
    Windows 7 x64
       #1

    4.1 audio only coming out of rear right speaker


    As above.

    I have a 4.1 surround system that I've been told can work with just the 3 port motherboard sound (red-green-blue ports), but the only sounds are coming out of the rear right speaker. Which is still screwy because it's activating RR when it should be coming out of RL.

    I believe I have it set up correctly:

    Green jack => Green port (front speakers)
    Black jack => Blue port (rear speakers)
    Red jack => Red port (subwoofer)

    This is what it looks like from the Speakers properties window:

    4.1 audio only coming out of rear right speaker-untitled.jpg

    I do have "Disable front panel jack detection" marked, so it shouldn't be trying to play the front speakers through the headphones jack. But I'm thinking that might be the problem.

    Any ideas?

    Thanks in advance.
      My Computer


  2. Posts : 8,135
    Windows 10 64 bit
       #2

    Do you have the speakers configured in the Sound Panel/Playback? Click to highlight your speakers and then click the Configure button in the lower left of the panel.

    In my setup, 4.1 is not an option, and may not be in yours so the 4.1 may never work completely right. 5.1 (or 7.1) is what is normally used, not the older 4.1 systems.
      My Computer


  3. Posts : 4,161
    Windows 7 Pro-x64
       #3

    Click on the Levels tab and see if the speaker volume is turned up. There's also a Balance level for front and rear speakers. You may have to scroll down to get to the speakers.
    Attached Thumbnails Attached Thumbnails 4.1 audio only coming out of rear right speaker-speaker-levels.jpg  
      My Computer


  4. Posts : 4,161
    Windows 7 Pro-x64
       #4

    Ditto what Fireberd says also. Forgot about the Configuration.
      My Computer


  5. Posts : 9
    Windows 7 x64
    Thread Starter
       #5

    fireberd said:
    Do you have the speakers configured in the Sound Panel/Playback? Click to highlight your speakers and then click the Configure button in the lower left of the panel.

    In my setup, 4.1 is not an option, and may not be in yours so the 4.1 may never work completely right. 5.1 (or 7.1) is what is normally used, not the older 4.1 systems.
    I checked, and I set it to Quadraphonic.

    carwiz said:
    Click on the Levels tab and see if the speaker volume is turned up. There's also a Balance level for front and rear speakers. You may have to scroll down to get to the speakers.
    Speaker volume is up to 100% across the board.

    Now instead of just the RR giving off RL output, ALL sounds are going through RR speaker. So when it tests the speakers, L, R, RL, RR all get outputted from RR. And each at different loudness too.

    Screwier and screwier....
      My Computer


  6. Posts : 4,161
    Windows 7 Pro-x64
       #6

    Are you certain the speakers work? Do you have a radio or other device to test them?
    What is the configuration of your speakers? Is the subwoofer on a separate plug or part of a front/rear set (2.1)?
    Remove the plugs and re-insert. Make sure they are going in all the way.
      My Computer


  7. Posts : 9
    Windows 7 x64
    Thread Starter
       #7

    carwiz said:
    Are you certain the speakers work? Do you have a radio or other device to test them?
    What is the configuration of your speakers? Is the subwoofer on a separate plug or part of a front/rear set (2.1)?
    Remove the plugs and re-insert. Make sure they are going in all the way.
    Yes, I know they work. The backstory is that I had an audio card (Creative Xi-Fi, or something along those lines) and the speakers worked fine. I got a new graphics card, but it's a double-wide (GeForce 560 Ti), so now there's no room for the sound card because otherwise it'll be right on top of the video card. Hence the move back to onboard sound.

    The configuration (I'm no expert on speakers, so please bear with me) is that the 4 speakers (R, L, RR, RL) all plug into the subwoofer. From there, the subwoofer plugs into the computer with a red, green, and black cable.
      My Computer


  8. Posts : 4,161
    Windows 7 Pro-x64
       #8

    Check your BIOS. Some motherboards require the on-board audio to be "enabled".

    Then Configure your sound as 5.1 and disable the Center channel. Quad is four speakers. The subwoofer may be confusing the setup.

    Some system specs would help.
      My Computer


  9. Posts : 9
    Windows 7 x64
    Thread Starter
       #9

    carwiz said:
    Remove the plugs and re-insert. Make sure they are going in all the way.
    This seems to have solved it. I don't know why, but I unplugged EVERYTHING and plugged it all back together. Maybe the computer just needed everything to be reconnected to recognize it. I'm not sure.

    The other thing I did was uninstall all the old Creative drivers and programs, which didn't make a difference until I reconnected everything, but perhaps that helped.

    Also, the system is now set to 5.1 Speakers.

    Thanks for all your help!
      My Computer


  10. Posts : 4,161
    Windows 7 Pro-x64
       #10

    Glad you have it working.

    Sometimes it's the simple things that give the most trouble.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 08:05.
Find Us