Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: IDT integrated soundcard. Need to change jack assignment?

26 Nov 2011   #1
nonyabus

Windows 7 ultimate x32
 
 
IDT integrated soundcard. Need to change jack assignment?

My front speaker pin (the green one) is ruined. When I plug my headphones into any other pin, the sound will not work.
I know it's possible to change pin assignments with realtek, I used to do it through their software. IDT however allows no such thing through their control panel.

Is there any other way to change it?

I'm using an integrated sound processor Intel Dp35dp and Windows 7 x32bit


My System SpecsSystem Spec
.
26 Nov 2011   #2
nonyabus

Windows 7 ultimate x32
 
 

I was messing around the registry editor and I found this:



Changing the value of Input/Output from 01 to 04 does nothing. I'm not sure of what I'm doing but I hope this will give someone an idea...
My System SpecsSystem Spec
26 Nov 2011   #3
Corazon

Windows 7 Professional SP1 32-bit
 
 

Welcome to SevenForums!

First off, I'd strongly suggest to change that registry value back to 01 if you haven't already...to me it appears to be completely off-base.

I don't think you can change jack assignments for your onboard audio. I'm afraid your only recourse is to try and physically repair the jack (might not be possible) or install a cheap PCI soundcard to use instead.


EDIT: I just realized you have the option of using the back panel jacks or connecting a front panel to the motherboard. Do you have a front panel connected?
My System SpecsSystem Spec
.

26 Nov 2011   #4
nonyabus

Windows 7 ultimate x32
 
 

I don't have a front panel. I've been using the rear panel jacks the whole time and now the green one is busted.

Are you sure I have no other recourse? What about using a S/PDIF connector? Would that work?

BTW I did change the value back to 01 after I saw that it did nothing.
My System SpecsSystem Spec
26 Nov 2011   #5
nonyabus

Windows 7 ultimate x32
 
 



This shows up in the audio control panel. I have no front panel so I can't use those, but I do have all the other ones.


No sound will come out if I just plug the headphones in (only used to work with front) - if I get them to work as front speakers then the problem will be fixed. But how?
My System SpecsSystem Spec
26 Nov 2011   #6
nonyabus

Windows 7 ultimate x32
 
 

Ok, I've got some progress!

I went here and changed it to "Quadraphonic" and clicked test. When the RR & RL play I can hear them through my headphones.

Now I need to make it so sound is only coming out of those two. Any ideas?
My System SpecsSystem Spec
Reply

 IDT integrated soundcard. Need to change jack assignment?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
How do i change jack option
Hello, i've bought a new motherboard which is ASUS M5A78L-M/USB3.It has 6 jack slots.I've downloaded the audio driver for it from asus.com which is VIA HD Audio Deck.I have a Creative A520 (5.1 Sound system) Now to what i want, Since i have 6 jack slots and my sound system has 3 jacks plus a...
Sound & Audio
Integrated Audio Jack broken?
I got 5.1 integrated audio on my motherboard and I'm using 2.1 speakers. Got the green jack plugged into the front port and the pinky orange one in the Center/LFE port. Problem is the left speaker is either quieter than the right or completely off. I wiggle the green jack cable and sometimes...
Sound & Audio
How do i output sound through the back panel jack and the front jack
Hey guys! I want to output sound both through the headphone jack on the front of my case and the sound jack at the back of the computer, how would i do this? I looked around in the sound setttings and the realtek audo and couldn't find anything.
Sound & Audio
Realtek Audio Jack Output Assignment Troubleshooting
The jack outputs are all bundled into one device. I want to have one device for each output jack, and not all on one. That means to automatically have detected various output devices...I add also a pic, so you can understand my problem. The picture text is in italian, but it shouldn't be a problem...
Sound & Audio
No sound - Windows only showing front jack and not rear jack
Hi everyone, I recently reinstalled Windows 7 pro on my PC. Sound was working fine before. Now Windows only shows a front jack in the sound playback device settings. There is no front jack, however, only a rear jack and it is not working. If I play music the levels monitor shows sound playing,...
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:38.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App