Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Realtek HD Changing Jack output reassignments ( FIX )


14 Jan 2011   #141

Windows 7 Pro 64b
 
 

ignatzatsonic :

When I try to pm I'm told by the forum that I don't have sufficient permission or that I'm pending activation. My account must be too recent. I apologize then for the brief off-topic!

I've got a P8P67 pro, thus with an AL887, and a very unsophisticated sound setup (2.1 system and headphone + mic for gaming). I have not noticed anything special regarding sound output quality which is on par with my previous ALC889A-based system (though I am of course no true audiophile), but I had to activate the mic boost by 10dB, which I don't remember doing on my previous LGA775 board. Other than that, nothing in particular, hardware and software work exactly like previous versions (except - of course - for the jack reassignment which, on my previous box, could be done through driver management on all back panel jacks and is now limited to the front speaker/headphone green jacks of both back and front panels).


My System SpecsSystem Spec
.

14 Jan 2011   #142

Microsoft Community Contributor Award Recipient

Windows 7 SP1, Home Premium, 64-bit
 
 

Quote   Quote: Originally Posted by Likan View Post
ignatzatsonic :

When I try to pm I'm told by the forum that I don't have sufficient permission or that I'm pending activation. My account must be too recent. I apologize then for the brief off-topic!

I've got a P8P67 pro, thus with an AL887, and a very unsophisticated sound setup (2.1 system and headphone + mic for gaming). I have not noticed anything special regarding sound output quality which is on par with my previous ALC889A-based system (though I am of course no true audiophile), but I had to activate the mic boost by 10dB, which I don't remember doing on my previous LGA775 board. Other than that, nothing in particular, hardware and software work exactly like previous versions (except - of course - for the jack reassignment which, on my previous box, could be done through driver management on all back panel jacks and is now limited to the front speaker/headphone green jacks of both back and front panels).
I think you are right about your lack of PM. I tried to PM you and that link was unavailable, so you don't have inbound or outbound--yet.

Re sound: all I need is 2 channel, left and right, working with headphones or over a 2 channel home stereo, with recording capability through Audacity.

I'm less interested in "sound quality" than I am in functionality.

Can you confirm this capability:

Recording "what you hear" aka "stereo mix" with the Realtek chip?? Like if you went to youtube and heard something you liked. Easily recordable???

That capability is often difficult on Win 7, depending on sound card/drivers. Much more difficult than XP or Vista.

If you later develop issues not known now, after you get PM going, I'd appreciate a PM. I probably won't buy for a couple of weeks, but would like to know what I am likely to encounter.

Oh---I will be using 64-bit. Are you using that or 32?
My System SpecsSystem Spec
16 Jan 2011   #143

Windows 7 Ultimate x64
 
 

---edited
My System SpecsSystem Spec
.


17 Jan 2011   #144

Windows 7 Pro 64b
 
 

Quote   Quote: Originally Posted by ignatzatsonic View Post
Recording "what you hear" aka "stereo mix" with the Realtek chip?? Like if you went to youtube and heard something you liked. Easily recordable???
Still no pm, sorry, so I'll quickly answer that here. Yes I had access to the stereo mix recording source in the sound menu of the control panel, and I could successfully record (with Windows basic recorder) the sound from a Youtube clip, as you suggested (although the recorded sample sounded much lower than the original clip, but I did not spend much time tinkering the input level). Quite interesting in fact, I had never really looked up how to do this, now I know

I'm using a 64b Pro edition of Windows. I'll keep you informed if I find out anything worth mentionning about this sound chip!
My System SpecsSystem Spec
26 Jan 2011   #145

W7
 
 

[QUOTE=zer09;158192]
Quote   Quote: Originally Posted by Neilsouth View Post
Mappings are saved in the following location "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}\0000\Settings\DevType_0888_SS147b1083 or ending in DevType_0885_SS18490890

"Pin00" = Rear Green-Coded "FR FL" jack
"Pin01" = Rear black-coded "RR RL" jack

"Pin02" = Center/Subwoofer
"Pin04" = Mic-In

"01 00 00 00" = Mic-in
"02 00 00 00" = headphones
"04 00 00 00" = Front speakers
"05 00 00 00" = Rear speakers
"06 00 00 00" = Center/subwoofer
"07 00 00 00" = Side speakers

Example if i want "Pin01" = rear black-coded "RR RL" jack to be front speakers all i have to do is Pin01 - 04 00 00 00.
]
What about LINE-IN? Why is it not included in the list?

I'm trying to get the card to recognize the input thats currently set to mic-in as a stereo line-in. would that be "08 00 00 00"?
My System SpecsSystem Spec
31 Jan 2011   #146

Windows 7 Enterprise 32 bit
 
 

Man THANK YOU! IT WORKS!!! I can't even believe it..

For Others..
THe specified location is to be found ONLY AFTER INSTALLING Realtek drivers.. in REGEDIT.. look for:

"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}\0000\Settings\Drv6299_DevType_0862_SS18490862"
There you will find PIN00, PIN01..all to PIN07
And to be shure you find Pin00-07.. I just plugged-in and out all of jack inputs/outputs while PC is running.. and refreshing regedit..
Then after changing for example PIN01 from 02 00 00 00 to 04 00 00 00 please DO RESTART to take effect..

And now i made even two front speaker outputs working in place of one.. Now i can plug my AMPlifier in one and headphones in other and dont have to unplug them every time i want to change audio peripherial...
My System SpecsSystem Spec
13 Feb 2011   #147

Windows 7 Ultimate 32 bit
 
 
After Update Realtek Drivers i cant get 5.1 sound

Hi!!
I had 5.1 sound working perfect on Windows 7 Ultimate 32 bit, but i decided to update because i had to change pin assignament every time i reboot the computer through Realtek HD Audio Manager.
I installed v2.57 of the Realtek HD audio driver, and now i am not able to get 5.1 sound, only front speakers work

I connected the speakers and appeared 3 entries in Windows registry

Pin03 : 02 00 00 00
Pin05: 01 00 00 00
Pin07: 00 00 00 00

When i change the output assignments via HD Audio MAnager, registry looks this way:

Pin03 : 02 00 00 00
Pin05: 06 00 00 00
Pin07: 05 00 00 00

I change Pin03 to 04 00 00 00 but nothing happens...Am i Missing something???

Thanks!!!
My System SpecsSystem Spec
16 Feb 2011   #148

Windows 7 Ultimate x64
 
 

Hi, thank you very much for this post, it has been enlighting.
My issue was the following: my case frontal jacks just sucked, so my idea of having a 5.1 system + headphones (when I need to concentrate/have a better surround sound for fps games I like to use headphones) was difficult.

The thing is that heapdhones didn't work right through the front ports, so I wanted to "clone" the "Frontal Speaker Out" of a 5.1 system output. I did it with OP's info, it worked like a charm.

I have one difficult, though. My home theather doesn't have volume, it always plays at the same level (unless I change it from where I have it connected, ie my pc of course). Compared to the HT, the headphones sound really low, so I wanted now to go a bit further and also change the volume of the port where I have my headphones connected.

Seeing the keys in the registry make me feel this is possible, but I'm just lost and I don't have a clue to where to begin. I mean, there's a lot of Vol0_RearLineOutWave3_{blablabla} and Vol1_RearLineOutWave3_{blablabla} keys that, from the first three letters, I suppose manage the volume for each output. But the value of the keys and the "blablabla" are all in hexa and I don't really know what do they translate to... anyone has any clues?
My System SpecsSystem Spec
20 Feb 2011   #149

windows 7 enterprice x32
 
 

Hi there, I have a problem, that I broke my headset jack, and now when I put something in it it's not holding well


So I fought that I could somehow change the MIC jack with HEADSET, but when I go to

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}\0000\Settings\Drv6299_DevType_0862_SS1179ff02

and change PINs number from 01 to 02, and from 02 to 01 where nothing happens. I tried restarting computer, I downloaded newest realtek drivers, when I change from 01 to 02, nothing happens, if I unplug the cable and plugin it again and restart regedit the numbers change to their defaults no mater I restart the computer or not. If I restart the PC and don't unplug the cable, speakers still won't play


Any suggestions ?
My System SpecsSystem Spec
03 Mar 2011   #150

Windows 64bit
 
 
Sounds I have no idea problem

Hello I plugged in a cd thingy to my pc yesterday and my pc flashed on and off then my sound just didn't work

I have done reinstalling uninstalling drivers I did lots of stuff off here but I think my problem may be slightly different. I will post a screenshot of everything I can see..the audio is showing the audio is playing but I have no sound.

I need help I'm a youtuber I need my SOUND!

and in reg edit there is no audio settings it's crazy.

And I also need to change it to the speakers I managed to at one point then it changed itself back and messed up. even when I changed it to speakers it didn't work.


Attached Thumbnails
Realtek HD Changing Jack output reassignments ( FIX )-audio-broken.jpg  
My System SpecsSystem Spec
Reply

 Realtek HD Changing Jack output reassignments ( FIX )




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:33 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33