Audio Only out of one channel (multiple headsets and audio devices)


  1. Posts : 1
    Win 7 x64
       #1

    Audio Only out of one channel (multiple headsets and audio devices)


    I have three audio devices on my pc (ATI HDMI, Via HD onboard and steelseries usb soundcard) and through all devices I only get audio out of the left channel. I have tried two pairs on headphones and my tv speakers all with the same results. I have looked at all the balancing end everything is set to even on both channels.

    Windows 7 X64 ultimate
    M4A78 PRO Mobo Via HD audio
    Steel Series Usb SoundCard
      My Computer


  2. Posts : 8,135
    Windows 10 64 bit
       #2

    As you have three devices, each one separately generates the sound. The only thing common would be the sound itself, such as a wav or mp3 file.

    When you use the PC's sound chip (VIA HD) that is one hardware device and the wired on the motherboard output jacks. If you use a USB connected sound device then you are using that device to generate the sound and that device's physical jacks. If you use the ATI HDMI, most video cards have their own built in audio chip (unless this is an old video card that uses S/PDIF connection to the motherboard) and thus again everything separate for audio generation and connection.

    One comment, if you have both the Via on board audio and the usb connected sound card enabled at the same time there can be conflicts and sound problems. Not the balance problem you have but there can be problems. If you want to use the VIA then physically disconnect the USB. If you want to use the USB, disable the on-board audio in the BIOS.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 23:48.
Find Us