Intel IDT Audio Driver will not install

I am trying to install the latest audio driver for the Intel® Desktop Board DG965SS under Windows 7 Beta x64.

Intel® Desktop Board DG965SS Audio: IDT* 92XX Driver

However, when it goes to configure the driver I get the error:
Device Object not present, restart the system and run setup again.

I get this running the installer in normal and compatibility modes.

Any help on how to get around this error, or a point in the right direction for the correct driver would be greatly appreciated. Merci beaucoup !

When i checked the Hardware manager, Windows 7 installed mine as a High Definition Audio Device, But i haven't tried to get Surround sound yet

Yeh, thats what it did for mine as well...which is fine to just hear sound.
However, I need Stereo Mix, Line In, Mic, etc. that requires an audio driver

I tried the RealTek driver, but that did nothing, as expected. :[

Well, i found a relatively easy fix....
Step 1:

Ok, first you need to copy the sound driver files
off the cd that came with your motherboard into any folder on your computer.
For example, "D:\Sound\IDT"

Step 2:

Second, navigate to the folder you pasted the drivers in.
Then go to IDT, then WDM and lastly Vista.

Step 3:

Next, open both ---_WRT_---_--_--.INI files in notepad.
For example mine were called, "ECS_WRT_202_G2_DY.INI" and "ECS_WRT_206_G2_DY.INI"
Under the [Models] category remove all occurences of "&SUBSYS_--------"
For example it should read,"
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7680=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7680=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7682=this
HDAUDIO\FUNC_01&VEN_8384&DEV_7683=this"

Now save both files and start the copied installer, and it should work.

I registered for the forum just to say thanks T11230. Your tip worked, thanks!

thanks T11230

I also registered for the forum to say thanks T11230, and with your help make the IDT audio drivers work for the Intel DP965LT:
In the [Vista] folder of the decompressed driver ( I used AUD_allOS_D20001.0x_PV_IDTGUI_v105_Legacy.exe), look for a file "Stwrt.ini", then edit as T11230 instructions: delete [&subsys_######] but leave the "=" and next characters, example: HDAUDIO\FUNC_01&VEN_8384&DEV_7680=I3.INI.
Then reset the PC AND reconfigure your audio settings because in the first boot you are not going to get any sound (don't panic).

i also register to say thanks man.....

people who r still unable to configure there 5.1 system...

1) Repeat the steps told by t11230 and fyrigoyeno

2)then configure ur windows sound panel (control panel-->sound->manage audio device-->select the speker icon-->then click on configure -->set to 5.1 thats all)

I tried T11230`s and others instructions and still nothing... still playing on 2 stereo chanels...
I have windows vista ultimate x64 on my HP Pavilion dv5-1101en, and i have the same problem with outputing 5.1 sound.
In my IDT High Definition Audio Driver i erased the "&SUBSYS_--------" phrase from
stwrt64.ini
stwrt.ini
WRT_M4-1.ini
WRT_M4-2.INI
WRT_M4-3.INI
WRT_M4-4.INI
.
.
.
WRT_M8-2.INI
I tried multiple combination for almost 10 hours... I became desperate... I spent 400 euros on my 5.1 samsung sound system and all I can hear is sterea sound...
Please help me!