Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Speech Recognition Error.

02 Feb 2009   #1
expo703

Windows 7
 
 
Speech Recognition Error.

I noticed there's some issues with this but could not fine a resolution. When i first installed Windows 7 I ran the Tutorial for Speech Recognition and it worked perfect... I also used it for awhile and it worked perfect , then i rebooted and was installing stuff i dont remmeber what... but since i just updated i installed alot of stuff... I disabled speech recognition to auto-start when windows booted up and ever since i get this error...

When i try to open speech recognition you can see it pop open for a quick second up top and then i get this...

"SPEECH RECOGNITION COULD NOT START BECAUSE THE LANGUAGE CONFIGURATION IS NOT SUPPORTED.....THE RECOGNIZER LANGUAGE MUST MATCH THE LANGUAGE OF THE USER INTERFACE. PLEASE CHANGE THE RECOGNIZER LANGUAGE IN THE SPEECH RECOGNITION CONTROL PANEL UNDER ADVANCED OPTIONS"

Now.... i'm not a total idiot and it was set to US the whole time... and this Windows 7 Beta 7000 32 bit English...oh and all the other speech regonistion otpions work such as tutorial and Train the computer to better understand you (yeah i sat there and read the whole thing for about 5 mins and it worked perfect)...

I'm not the only one with this issue... i have a Creative X-FI new beta drivers... for windows 7.. Nvidia 9600 GT . Q6600 Intel and ASUS P5K mobo..

HELP?
Thanks
John


My System SpecsSystem Spec
.
04 Feb 2009   #2
expo703

Windows 7
 
 

BUMP... how can it work perfect for over an hour and then stop all the sudden!!
My System SpecsSystem Spec
04 Feb 2009   #3
NosferatuX

Windows 7 Build 7048 x64
 
 

Hi expo703 and welcome to the forum!

I've tried using the speech recognition on my system which have loads of programs installed. No problems encountered.
The issues you have is a tricky one.
Please try using CCleaner, found here and post here, run the registry scan and cleaner, restart.
See if this solves it.
Next steps, verify the following in Control Panel > Regional and Language Settings;



Making sure that everything is set correctly.
After making the necessary adjustments if any was made, restart.
Go back and try to activate Speech Recognition.

Now, if all else fail, I'd recommend doing a Repair Install.

Please let us know how this works out
My System SpecsSystem Spec
.

05 Feb 2009   #4
killercat

XP pro, Win7 Ultimate x86
 
 

Quote   Quote: Originally Posted by expo703 View Post
"SPEECH RECOGNITION COULD NOT START BECAUSE THE LANGUAGE CONFIGURATION IS NOT SUPPORTED.....THE RECOGNIZER LANGUAGE MUST MATCH THE LANGUAGE OF THE USER INTERFACE. PLEASE CHANGE THE RECOGNIZER LANGUAGE IN THE SPEECH RECOGNITION CONTROL PANEL UNDER ADVANCED OPTIONS"
Honestly, I'm not really sure if that error message is accurate.

I'm using Speech Recognition without any problems using the following settings:
Formats: German (Austria)
Location: Austria
Language for non-Unicode programs: German

Installed keyboard layouts:
German (Austria)
Korean (Korean)
English (US)


Attached Images
   
My System SpecsSystem Spec
07 Feb 2009   #5
expo703

Windows 7
 
 

NOTaccurate? i typed it out perfectly and there are many ppl who have this issue its not just me......All my settings are fine, everythings on USA/English... I have CC cleaner already and have ran it.. I do not think i have to repair this is a brand new install 100% perfect not even a upgrade clean isntall from XP. It worked 100% fine till i rebooted and then just stopps working...
My System SpecsSystem Spec
07 Feb 2009   #6
killercat

XP pro, Win7 Ultimate x86
 
 

Hey expo703,
I think you misunderstood. I only meant to say, that maybe the error message itself doesn't state the problem correctly. Or not all of it, whatever.

My point simply was, that, although I'm not at all using the settings suggested by NosferatuX, I'm having no problems using speech recognition with the English beta build. So it might be something else causing your problem.
My System SpecsSystem Spec
07 Feb 2009   #7
NosferatuX

Windows 7 Build 7048 x64
 
 

Just an idea. You could try changing the locale to a different one, restart, change it back to your preferred locale and see if this sorts out your problem. The idea behind that is to just make sure that the locale settings on your system are properly applied as it might have been messed up somewhere either by another program or could be anything else as what killercat has suggested. Might be worth a try
My System SpecsSystem Spec
07 Feb 2009   #8
expo703

Windows 7
 
 

Locale you mean my location under control pannel> regional settings > location.. to say EU and reboot and then see if it works?
My System SpecsSystem Spec
07 Feb 2009   #9
expo703

Windows 7
 
 

THAT WORKED SPREAD THE WORD :} I SWITCHED my location to austria rebooted.. and it worked... i switched it back to USA rebooted and it worked!! THANKX
My System SpecsSystem Spec
09 Feb 2009   #10
NosferatuX

Windows 7 Build 7048 x64
 
 

Glad to hear that expo703!

My apologies to reply only now, I was out this weekend
My System SpecsSystem Spec
Reply

 Speech Recognition Error.




Thread Tools





Similar help and support threads
Thread Forum
Speech Recognition - Language Configuration is Not Supported Error Fix
How to Fix the Speech Recognition "Language Configuration is Not Supported" Error This tutorial will help show you a few solutions that can be done to fix when you try to start Speech Recognition and get the error message below. One or more of the solutions below may need to be...
Tutorials
Speech Recognition
When I teach my computer Speech Recongnition and change computers, where is the database so I can transfer it to the new computer?
General Discussion
Speech Recognition Error - Fixed!
I would like to thank C-11 for his/her help in providing a solution to my problem. the link in the email I received led me to a page in the forum which has step-by-step instructions with 4 possible solutions. Happily, the first solution works, and works well. :D
General Discussion
set up Speech Recognition error
I have run all the tutorials on the Speech Recognition program and had no problems whatsoever. The programs run perfectly and the computer hears me fine. However, when I attempt to run the Set up Speech Recognition program I never get anywhere. At the first window I read "Peter dictates to his...
Sound & Audio
Windows Speech Recognition - Error: language configuration not support
Hello everyone, I hope this is the right subforum to ask this question, I googled alot, but none of the solutions I have found work. Perhaps someone might be able to help me here. I have a Sony Vaio with a built in microphone, which works perfectly. I'm running Win 7 Home Premium x64. Now when I...
Software
Speech recognition
I use soeech recognition promarily for entering numbers into spreadsheets. I decided to try the native WIN 7 Speech Recognition rather than upgrading Dragon. I can't get to accurately do numbers. Is there a command or key you can use to specifiy numbers?
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App