Windows Vista 64-bit, Windows 7 32-bit, and Windows 7 64-bit
1. Install the card into a free PCI slot on the motherboard.
2. Plug your amplification device (ex. speakers, receiver, etc.) into the black "Back Surr" jack on the back of the card next to the optical output. [Previous card revision: "Alt. Out"]
3. Download the Envy24 Audio Controller Family Driver version 5.40a linked
here.
4. Install it using Setup.exe (Application) in the Setup directory. (
Note: For Windows 7, use XP SP2 compatibility mode.)
5. Restart the computer.
6. Download and extract the 4.60b XP64 drivers linked
here but do not install them.
7. In Device Manager (Windows key + Pause Break key -> Hardware -> Device Manager), under "Sound, video and game controllers", find the "Envy24 Family controller", right-click it and click Properties.
8. Go to the "Driver" tab and click "Update Driver."
9. Click "Browse my computer for driver software," browse to the location where you extracted the 4.60b XP64 drivers in step 6. There will be two drivers in the next screen one with and without "64 bits" under the model field. (Info: the non "64 bits" version is actually the current driver 5.40a you installed in step 4, the "64 bits" version is the one you want). It will ask you if you want to continue, click Yes.
7. Restart the computer again.
8. Once the drivers are installed, open the audio control panel using its tray icon on the taskbar.
9. Enable 2CH (not High Quality mode) by clicking the appropriate circle.
10. In Foobar, select WASAPI (envy24 speakers) as the output device.