Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Sound Issue When Display (Projector) Turned Off

30 Jul 2015   #1
BigGoose62

Windows 7 Home Premium x64
 
 
Sound Issue When Display (Projector) Turned Off

Thanks for any help!

Setup: Windows 7 PC -> Denon S500BT receiver -> Optoma HD26 projector

PC output is via HDMI to the receiver, which plays sound through my floorstanding speakers, and then the receiver outputs the display via HDMI to the projector.

My issues:
1) When the projector is turned off, the sound stops playing through my speakers. The receiver is still on.
2) Following issue #1, when I turn the projector back on the display is projected but there is still no sound from my speakers. If I look at the playback device listed, it shows the Denon receiver, and the green thing is lighting up showing that music is playing. Only by power cycling my receiver will sound come back.

I have called Denon customer service, and after walking me through every option they concluded that it's not the receiver. They say there shouldn't be anything the receiver is doing to prevent the audio coming through.

I think my PC is sensing that the display is off, and is somehow disabling the audio. Any help?


My System SpecsSystem Spec
.
31 Jul 2015   #2
fireberd

Windows 10 64 bit
 
 

The problem is in the Denon, possibly how it connects and how its HDMI interfaces with the PC.
My System SpecsSystem Spec
31 Jul 2015   #3
BigGoose62

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by fireberd View Post
The problem is in the Denon, possibly how it connects and how its HDMI interfaces with the PC.
Thank you for your reply. I actually have tested with a "dumb TV" instead of the projector, and the Denon had no issues when the TV was turned off. So I'm pretty sure (especially after spending hours researching last night) that this is an EDID issue between W7 and my projector. I am planning on trying to tape over the HDMI pin 19 to prevent the EDID data from being communicated, unless someone here can explain how to disable this in W7.
My System SpecsSystem Spec
.

31 Jul 2015   #4
BigGoose62

Windows 7 Home Premium x64
 
 

So I have solved this issue by placing a piece of electrical tape over pin 19 on the HDMI cable running from my projector to the receiver. This effectively blocks the EDID data that the projector was communicating to the PC. So now everything is working properly. Thanks for the help though!
My System SpecsSystem Spec
Reply

 Sound Issue When Display (Projector) Turned Off




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Display turned off unexpectedly
So I had opened my porn folder and that's when my computer's display turned off unexpectedly and now its not turning on (I tried hard resetting it) . My question is when the computer is fixed, will the folder open automatically or will the computer start up normally and my dad is insisting on...
General Discussion
flash projector issue
its not really a widespread issue but lve found one or two flash exe files dont seem to work properly.. l go to open it loads the screen then immediately closes again.. been wondering why and how to get it to run. first thing l tested was my virus scanner but disabling didnt help much.. any...
Software
Display problems with projector, Mac Theme
Hi, I've never posted here but am having a problem with my Laptop and cannot find a fix. I have a Dell Vostro 1320 Windows 7 64-Bit about 3 months ago like an idiot, I downloaded a mac theme for my PC. got sick of it and uninstalled it, it removed the wallpaper, sounds and a few other...
General Discussion
Win 7 Projector issue
Hi @ All I'm having serious Problems trying to connect a projector to my IBM Thinkpad T40. If my PC is running and i hook the projector on to it, nothing happens at all. If i press Fn+F7 (switsch monitor) my screen turns black for a second and then goes back to normal, but the projector still...
Graphic Cards
Monitor display goes out unless projector is powered on
I just upgraded one of our classrooms to a Dell Optiplex 380 running Windows 7. We have many of the model 380 running Windows XP. This is one of the first few w/Win 7. I connected a projector to the unit with an Ultima SXGA Monitor Y-cable. This allows what is on the desktop to show on the...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App