Windows 7 Forums


Windows 7: RCA to 3.5mm Conversion

04 Jan 2010   #1

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
Indian Territory
 
 
RCA to 3.5mm Conversion

I'm thinking about order a couple of these volume regulators:

http://www.cometsupply.com/pm/AVXVR1/r/gg/

After talking with a sale rep on the phone, I learned that this interfaces via an RCA cable, but the sound cards on my rigs only have 3.5mm connectors. I'm wondering if there is any reason that the normal operation of the regulators would be effected in any manner, if a converter was used at these sound card? The connection at the speakers are already RCA, so that shouldn't be a problem.

My System SpecsSystem Spec

04 Jan 2010   #2

windows 7 32
Wisconsin
 
 

None what so ever. The signal will remain the same, the only difference will be the connection.

Go to radio shack and by the second cheapest mini-plug(1/8) to RCA coverter they have.
My System SpecsSystem Spec
04 Jan 2010   #3

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
Indian Territory
 
 

Thanks, that's what I thought, but wanted to hear it from someone else before ordering.
My System SpecsSystem Spec
.


08 Jan 2010   #4

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
Indian Territory
 
 

I found this thread too late to use it as I wanted, but I started another with a related question:

Cable Routing
My System SpecsSystem Spec
Reply

 RCA to 3.5mm Conversion problems?



Thread Tools



Similar help and support threads for: RCA to 3.5mm Conversion
Thread Forum
dvi conversion Graphic Cards
32-bit to 64-bit conversion Installation & Setup
image conversion Music, Pictures & Video
.MKV conversion Music, Pictures & Video


All times are GMT -5. The time now is 06:19 AM.



Windows 7 Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd