Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Gigabyte EP45-UD3P Audigy No Sound in Windows 7 (64-bit

08 Feb 2010   #1
cloves

Windows XP
 
 
Gigabyte EP45-UD3P Audigy No Sound in Windows 7 (64-bit

Hi,

I just installed windows 7 64bit. I have a sound blaster audigy as installed the latest drivers from creative (SBAX_PCDRV_LB_2_18_0011.exe). I get no sound out of the card at all. Device manager shows the device is working correctly. I have also picked it as the default in the sound settings. No sound at all.

Running a Gigabyte EP45-UD3P wtih 8gigs of ram. This board has onboard audio which I disabled via the bios. Still got no sound from the audigy.


My System SpecsSystem Spec
.

08 Feb 2010   #2
computersplus

Windows 7 Ultimate 32 bit
 
 

check these settings for sound issues

Go to control panel

2. Double-Click on the Sound Icon

3. Single-click the Speakers to highlight them

4. Click on Properties (bottom right corner)

5. Go to the Enhancements Tab and Click on it

6. Now click "Disable All Sound Effects"
My System SpecsSystem Spec
08 Feb 2010   #3
cloves

Windows XP
 
 

computersplus thanks for the suggestion. I already had the enhancements disabled in the sound control panel.
My System SpecsSystem Spec
.


08 Feb 2010   #4
computersplus

Windows 7 Ultimate 32 bit
 
 

what model card is it?
My System SpecsSystem Spec
08 Feb 2010   #5
cloves

Windows XP
 
 

Its a Creative Sound Blaster Audigy. SB0090.

According to Creatives site, should be working. But after reading the forums at creative there are a lot of users having problems.
My System SpecsSystem Spec
Reply

 Gigabyte EP45-UD3P Audigy No Sound in Windows 7 (64-bit




Thread Tools





Similar help and support threads
Thread Forum
New Cisco SG200-08 Switch/Gigabyte EP45-UD3P/Realtek 81xx NIC TEAMING
I just received my new Cisco SG200-08 GB Managed Switch yesterday! Requirements were future proofing my network with IPv6, POE, VOIP, VPN,... Actually this thing has too many features... for now! Awesome switch @ $117!!! Newegg.com - Cisco Small Business SLM2008T-NA 10/100/1000Mbps SG200-08 8-Port...
Network & Sharing
M/B Gigabyte--GA-EP45-UD3P Rev 1
I want to install MS7 on new h/d.I was thinking of --- Toshiba 2TB Internal Serial ATA III Hard Drive for Desktops --.I will be getting hew desktop in 6-9 months and will use this h/d.The sepc say--2x sata 3gb/s connectors (gsata2_0,gsata2_1) supporting up to 2 sata 3gb/s devices.Would this new...
Hardware & Devices
GA-EP45-UD3P Rev 1.6 bios update to FC problem
To start i'd like to just say how much i hate this board and how i'll never buy another Gigabyte again. First I had problems with getting my memory stable with my mobo (solved by following a guide by gskill rep). then i keep having problems with random crashes in games and couldn't find a...
Hardware & Devices
GA-EP45-UD3P mother board problem
ok guys i have a GA-EP45-UD3P its a great board when i star the computer there are 6 LED lights (phase LED) on the board that light up as soon as windows boots they turn off is there any type of driver that will make these work in win7 64??
Hardware & Devices
GBB36X drivers on Gigabyte EP45-UD3P
I have a Gigabyte GA-EP45-UD3P I'm working on. I have an E-SATA bracket hooked to two ports run by a separate controller for the other SATA ports. I "think" the ports are JMicron controlled, but all it says is "Gigabyte GBB36X" I have the motherboard disk and the driver on it seems to be having...
Drivers
Driver for AHCI Gigabyte EP45-UD3P
I have been reading for days and don't understand this. When I get a system built using all SATA drives...is the best setting in the bios AHCI? I know the RAID setting requires drivers and IDE does not but how about AHCI? Should I even use this setting? Does it require drivers or does W7 have...
Drivers

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App