Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Almost inaudible sound from ALC888 RealTek HD (Win 7 x6

28 Feb 2010   #1

Windows 7 x64
 
 
Almost inaudible sound from ALC888 RealTek HD (Win 7 x6

Hello there WinSeven!



So, the story is this. I recently put together a computer running Windows 7 x64 and the problem I'm having is that my on-board RealTek AC97 HD Audio device (ALC888 model) is not outputting any sound via my headphones and very quiet sound on my Speakers.

The front panel doesn't do anything for my headphones and when using speakers on the rear panel, the sound is very quiet - despite every possible Windows / Realtek manager device setting stating it's on maximum volume.

See this picture:



As you can see, with everything put to max, that is the highest the green bar will go. I've done a lot of research on this issue and it seems I am not the only one. Many people seem to be experiencing the same or similar issues. No matter what driver I use (currently running latest RealTek HD Audio driver released 02/25/2010) and the best result I've had is in Playback Properties - having the option for Speakers, Headphones or Digital output. Now next to headphones it will say not plugged in. However when plugging in headphones to front panel nothing happens. Well, correction - sometimes I will be able to hear the test sound but it is so very very faint that it is practically inaudible.

I've checked the RealTek HD Audio Manager program extensively, tried checking the 'DISABLE FRONT PANEL DETECTION' options and setting Windows to various bitrates such as the DVD Quality that some suggest with no avail. At time of writing my speakers are connected to the rear panel and have very quiet sound. With some dicking around I may be able to get the same volume of sound from my headphones but it's just a bit clearer on speakers. I have sound through the speakers right now, however if I just replace my speakers with headphones, nothing comes through.

Really, I want to use a headset as I make commentated walkthrough series on YouTube with a large following of subscribers and this absense obviously displeases my fans haha.

EDIT:

Really randomly the sound slider moves higher up than on the above picture but it's still very quiet. I can put headphones in and barely hear anything. It's still very unusable to be honest.

Just a few more things to note:

I've tried different headphones/headsets/speakers
I've tried various drivers, Vista drivers
I've tried reformatting Windows 7
The Microphone level of volume is always on maximum or near maximum regardless to me speaking. Without a microphone plugged in, it still reads Digital Input on Recording Devices.
I get no sound whatsoever on Digital Output
When I check the 'DISABLE FRONT PANEL' setting on RealTek HD Audio Manager, the front panel jacks light up as if the headset is plugged in, but it isn't.
The RealTek HD Audio Manager has the correct assigned jacks. Such as (pink = Mic in / Green = Rear Speaker out or Headphone)
I've updated BIOS, Chipset drivers and everything else.
OnBoard sound is enabled in BIOS
Windows is completely updated.
The microphone playback slider is always on around 3 of the 5 bars on Audio Properties for some reason.

My system Specs are as follows:

Intel i5 750 2.67GHz
6GB DDR3 Ram
BFG nVIDIA GTS 250 OC
GIGABYTE P55-UD3L Motherboard (Rev.1.0)

One last thing: On my case I have two groups of audio pins: HDADUIO and AC97. I'm currently using the AC97 pins and it's connected to the F_AUDIO pinset on my motherboard. The HDAUDIO ones will not reach due to the rather disappointing layout of the motherboard (requires user to stretch sound cables across one side of the board)

I even tried installing just AC97 Audio drivers but no luck.

The VERY first time I put the computer together I remember having sound. I was playing Mass Effect 2 just fine. Then literally, overnight it must have stopped because the next morning I had no sound.

I know this is a long post but I thought it would be best to provide as much detail as I can. If there's anything else I can say to help give clues, then please ask as right now - no sound on a computer as fast as this is rather underwhelming to me. Especially as this is the first time I've been able to really play games like Crysis/Mass Effect 2 and such. If anyone has any answers I'd greatly appreciate them. Would using a USB headset make a difference? I don't really want to have to buy a soundcard as I believe the issue can be fixed, it's just a case of how. And if I did purchase a PCI soundcard, would I still be able to use StereoMix or be able to record both my voice/computer sounds simultaniously? I know FRAPS has a setting for this but am not sure if it only applies to onboard sound chips.

Thank you for your time,

Jack

My System SpecsSystem Spec
.

01 Mar 2010   #2

Windows 7, 64 bit Home SP1, Win 8.1.1 Pro 64 bit
 
 

One thought is the different operation between AC97 and HD Audio. AC97, (I think) is mechanical switching of signals by the front panel connection and HD audio is auto sensing type. If my thinking is correct then you need the drivers for the correct type. If your audio chip is the HD version then you need to be connected to the HD header on the motherboard and that could be the problem with the headphone jack.

The other thought is that the chip is defective and if that's the case you will have to install a separate sound card.
My System SpecsSystem Spec
01 Mar 2010   #3

Windows 7 x64
 
 

Tried using the HD Audio pins but no luck. I ordered me an HT Striker 7.1 Sound Card from NewEgg.
My System SpecsSystem Spec
.


01 Mar 2010   #4

Windows 7, 64 bit Home SP1, Win 8.1.1 Pro 64 bit
 
 

That's a great card. I have one and used it for a long time but recently installed a SoundBlaster as I need the MIDI synths that are on a SoundBlaster sound card. But, you won't go wrong with the Striker 7.1.

Don't forget to disable the Integrated Audio in the BIOS when you install the Striker 7.1 so there is no conflict with two sound devices.
My System SpecsSystem Spec
Reply

 Almost inaudible sound from ALC888 RealTek HD (Win 7 x6




Thread Tools



Similar help and support threads for2: Almost inaudible sound from ALC888 RealTek HD (Win 7 x6
Thread Forum
Ailenware Aurora - No sound after trying to update Realtek ALC888 Drivers
RealTek ALC888 - Low volume issue Sound & Audio
Line In - Problem on Realtek HD ALC888 Sound & Audio
Realtek HD Audio (ALC888) Sound & Audio
Gigabyte EX58-UD3R (Realtek ALC888) - What is wrong with Realtek? Sound & Audio
Realtek alc888 amd problem Sound & Audio
Realtek ALC888 Sound & Audio

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:56 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33