New
#11
Yes this card it needs to be powered up in order for it to work. I took a pic of the card, specifically a closeup of the 4 pin port i'm talking about:
And this is the defective power cable. I just ordered a new one:
So hopefully the problem will be limited to that power cable, i'll see when i'll get the new one then i'm gonna post if it finally worked or not.. Fingers crossed
You have any used floppy drive power connectors in there? If so you can use it as it is the same as what is on that adapter.
@JazzSus: Yes it needs to be powered from the MB.. I had this "bundle" a couple of years ago then i had to sell it. The connection i'm talking about was there as it is today with the one i just got, same exact model, nothing has changed for the only exception that the cable won't carry any power. Even though there's the front panel connected to the PCI card with the ribbon cable, both the front panel and the PCI card need power.
Man this I hear the first time. I have to check mine [open the case and look at the card pins?] The thing is I have all functionality and never have single problem on XPro niether on W7....hmmm thats strange. Thanks for info anyway.
Well I looked at the card the pins are there. Than I look furder and found "X-Fi Platinum Fatality Quick Start" sheet and there is NO picture that there is any power conection on the card itself. There is only "AD_EXT" ribbon cable to conect between card and front drive. Front drive is powered with "Power splitter cable" [enclosed as in retail Creative kit] I'm very afraid that information about powering PCI card are missleading and can cause demage....and maybe not just PCI card itself?? some other parts mobo? too. I'm 100% sure there is no need of power on PCI card itself.