Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: HDCP

02 Apr 2010   #21

W7 Ulti/64, XP Pro/32

Y'all intrigued me, so I pulled out the manual. I have all those parts. Its just possible I attached the vid cards little jumper to the wrong mobo header. I "THINK" I put it on the "IN" when it should be on the "OUT". I got a dongle with each vid card....................

My System SpecsSystem Spec
03 Apr 2010   #22

W7 Ulti/64, XP Pro/32

You are absolutely correct in your method. I was plug to the right SPDIF header but at one point I switched the Primary pci-e slot to the lower one in case. That card was running cooler because it had more room to breathe. I left the jumper wire connected to the upper card. In SLI. So moving to the card where the HDMI is plugged was the answer! Had know clue till this thread!

Unfortunately for me this computer does not deal with the HDMI as the older one. Will not allow my game to load, 1080i res is at 30Hz refresh rate and to big for screen. It insists on a 1280x720 res for 60Hz at 720p, which still will not fit screen. Older puter allowed for desktop resize so I could use 1080i @ 60Hz and ran the game. Older puter uses a GTX 8800 SC. Bleepin waste of my time all tho I did learn something.
My System SpecsSystem Spec
03 Apr 2010   #23
Microsoft MVP

Win 7 Ultimate x64

Thought it would work.

For the scaling can't help as I don't have a Nvidia card anywhere at the moment. Might be a good idea to start a new thread in the Graphics Card forum and see what they have to say.
My System SpecsSystem Spec



Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Blu-ray player sometimes says I'm not HDCP when I think I'am
I have Cyberlink PowerDVD 10 and I use it to play my Blu-rays on my computer. But sometimes, when I leave it paused for at least 10 minutes, an error pops up suggesting that I should check if I can play Blu-rays. So I did the thing, and it says green on all checks except for the one saying that...
Graphic Cards
Disable 2nd monitor due to hdcp incompatibilty
Hey guys, The situation: MY case has a 7" screen that is NOT hdcp compatible. So to watch bluray's (TMT5) I have to disable it. I usually do this through the screen resolution property page. Is there a quick way to toggle this? Will turning off the 2nd monitor, turn off Imon?
Media Center
HDCP-How to?
Hi, I know that there was a lot of discussion on HDCP on these forums. I checked these posts I still have few doubts. I will...
Graphic Cards
Understanding HDCP -- Blu-Ray copy protection and its h
Computers that play Blu-Ray discs have to deal with High-Definition Copy Protection (HDCP). This is a system involving both software but also hardware chips that are placed in equipment that might be used to play Blu-Ray content. Because the manufacturers of blue Ray discs do not want unauthorized...
Music, Pictures & Video
What is HDCP?
My graphics card says HDCP, but there is no explanation anywhere online of what it does. They tell you what it is. Some of them explain how it works. But there is no example or anything on exactly what happens or how to use it. So what does it mean if my card is HDCP? Does that mean I'll be...
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:05.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App