Windows 7: Intex it-nb20 usb speakers not working

Tw33k posed a good question, answer that one and also do this.

Go to the Playback Devices again, select your speakers... on the bottom left, there is a button labeled "Configure" open it and see what the setting are. It should be set to Stereo.

There's also one other oddity than can happen with USB speakers. They sometimes shut down. So, try a machine restart, also try setting the Default speakers to something other than USB, then re-selct them as the default device.

Ap

no sound meter does not go up.
even if i try to test it it says test failed

maybe it's late , but i had the same problem .
the solution is the same like the guy above told u , but after u choose the default audio device "USB Speakers" go to Properties of the USB Speakers then "Enhancements" there make a check at "Disable All Enhancement" , then the speakers gonna work again ,
It's because Microsoft programmed the default status of working with enhancements , but The Intex speakers don't all have the property , gd luck

Thanks a lot speakers r working now!!!!!!!!!!!!!!!!!!!!
Again thankz a million!!!!!!!

Thanks for your help, TwoSmiles! Glad your speakers are working again, mcrahul. Let us know if you need anything else.

Cheers,

Walker
Windows Outreach Team

thanks, i registered just to express my gratitude

Thanks very much for the tip below, also worked for my Trust USB speakers
Rob