Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows Firewall error 0x8007042c with no network access

05 Feb 2014   #11
cottonball

Windows 7 Home Premium
 
 

Try the following...

Go to Start > Run, and type in: cmd

At the Command Prompt type the following commands, one at a time, and press Enter after each:

Code:
ipconfig /release
ipconfig /renew
ipconfig /all
Check if your IP address returned to its original format (192.168.x.x)

You can also try resetting your router by holding the reset button on the back for about 30 seconds and then releasing. Give the router a few minutess to initialize itself and then attempt the connection again.
You also need to reset your wireless password (WPA, WEP) after your router is reset.

If still no-go, you may want to contact your ISP, or, post the connectivity problem in the following forum:
Network & Sharing - Windows 7 Help Forums


My System SpecsSystem Spec
.
Reply

 Windows Firewall error 0x8007042c with no network access




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows FireWall Problem, Error 0x8007042c
Hello all! ive been trying to work around this issue for about 5 hours now. I have tried many fixes that people are suggesting from all coners of the internet! If anyone else can help out that would be great! Here are the things i have tried; I first started this journey with the error...
System Security
Windows Firewall error 0x8007042c + error 1068 (manually starting)
So when i try to get Windows Firewall to run on recommended settings i get error 0x8007042c. So far i have tried- all four methods on the microsoft help page here: ?0x8007042c? error message when you try to start Windows Firewall when i tried manually starting it i got error 1068 the dependency...
System Security
Getting error code 0x8007042c when trying to start windows firewall
Hi guys, It seems windows won't let me breath easy for long :cry:. Problem description : ================== I am unable to connect to wired or wireless internet, reason being, I think, is because windows firewall is not starting. Not sure why this happened but I think its because of a...
System Security
Unable to enable windows firewall , error code 0x8007042c
I'm pretty sure it was caused by some virus that disabled it. Windows firewall authorisation driver stated that >> This device is not present, is not working properly, or does not have all its drivers installed. (Code 24) I had uninstalled my trend micro titanium from my laptop and installed...
System Security
I can't use my Windows firewall, because of the error 0x8007042c
I hope picture explains everything :p PS. It has been like this for a year.
System Security
Cant turn on/update Windows Firewall error 0x8007042c
Hello there! It seems i have some sort of a firewall problem. It says Action Center cant turn on Windows firewall, do this manually but when i try Use recommended settings, i get this error... http://www.upload.ee/image/1783224/firewallupdate.jpg...
System Security


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App