Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Driver Verifier - Enable and Disable


12 Nov 2013   #30
Lostlam

Windows 7 64bit
 
 

Quote   Quote: Originally Posted by Raikku View Post
I tried to use this and that was impossible because my pc crashed with brief flash of bscreen before Windows even started to load. Had to do recovery in there start screen to get normally in Windows. So this verifier-program seem to be quite hazardous to use.
Same thing happened to me. Do you know what might be causing this?


My System SpecsSystem Spec
26 Dec 2013   #31
skrillek

64 bit windows 7 home professional
 
 

hey i just followed your instructions which are very goodbtw
what will this do? will it test all the drivers i have selected for problem or what?
My System SpecsSystem Spec
20 Jan 2014   #32
epson1

Windows 7 Ultimate 32 bit
 
 

I tried to use this and that was impossible because my pc crashed before Windows even started to load. Had to Go into safe mode to disable Verifier.exe for my PC to boot into windows Any help please..
My System SpecsSystem Spec
16 Feb 2014   #33
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by epson1 View Post
I tried to use this and that was impossible because my pc crashed before Windows even started to load. Had to Go into safe mode to disable Verifier.exe for my PC to boot into windows Any help please..
That's the whole idea: any bad driver will instantly crash your system and generate a minidump file with crash information, if you enabled minidump files to be written to your Windows folder before using verifier. To switch verifier off, simply boot in Safe Mode open verifier again and disable it.
My System SpecsSystem Spec
03 May 2014   #34
gixr750

windows 7 Home Premium 64 bit
 
 

Ran the verifier and had to restart manually. Upon restart Windows didn't start normally and had to perform a Repair and then a System Restore. Any ideas?
My System SpecsSystem Spec
03 May 2014   #35
Useless User

Microsoft Windows 7 Professional 64-Bit 7601 Multiprocessor Free Service Pack 1
 
 

In the end, in my case, it was bad memory...
My System SpecsSystem Spec
03 May 2014   #36
gixr750

windows 7 Home Premium 64 bit
 
 

I put off the memory test since it's new but there's still the possibility it may be bad. I'll run MEMTEST to check. Thanx for the info.
My System SpecsSystem Spec
08 Aug 2014   #37
mikedee

windows 7 x32 ultimate
 
 

Hi, I followed the instructions but the computer was unable to restart normally.
I started in Safe Mode and changed the settings back
Not sure where to go from here any advice appreciated
a copy of the Whocrashed report as follows

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Fri 08/08/2014 09:40:31 GMT your computer crashed
crash dump file: C:\Windows\Minidump\080814-16754-01.dmp
This was probably caused by the following module: netbt.sys (netbt+0x24D30)
Bugcheck code: 0xC9 (0xC, 0xFFFFFFFF8891B380, 0xFFFFFFFF9D6B8F68, 0x0)
Error: DRIVER_VERIFIER_IOMANAGER_VIOLATION
file path: C:\Windows\system32\drivers\netbt.sys
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: MBT Transport driver
Bug check description: This is the bug check code for all Driver Verifier
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

My System SpecsSystem Spec
08 Aug 2014   #38
Brink
Microsoft MVP

64-bit Windows 8.1 Enterprise
 
 

Hello Mike, and welcome to Seven Forums.

See if you may be able to do a system restore (in safe mode or at boot) using a restore point dated before this happened to hopefully undo and fix it for you.

Hope this helps for now,
Shawn
My System SpecsSystem Spec
10 Aug 2014   #39
mikedee

windows 7 x32 ultimate
 
 

Hi Brink, thanks for your response, I am still working on the problem ( when I do not need the computer )
My next move was to decrease the amount of drivers selected to just the first 10 and the result was the same
Next time I shall limit it to the first 5

Iam also checking/updating drivers
My System SpecsSystem Spec
Comment

 Driver Verifier - Enable and Disable




Tutorial Tools



Similar help and support threads for2: Driver Verifier - Enable and Disable
Windows 7 Tutorial Category
Solved Turbo Boost UI Monitor Driver. Can I disable, or continue let enable? Hardware & Devices
Driver Verifier inquiry. Drivers
Wireless Driver Enable & Disable itself Network & Sharing
BSOD after driver verifier BSOD Help and Support
Driver verifier BSOD BSOD Help and Support
BSOD with Driver Verifier BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:29 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App