Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Welcome Log On Text Message - Change

09 Aug 2012   #130
muiacir

windows 7 ultimate x64
 
 

yes you right...it worked


My System SpecsSystem Spec
09 Aug 2012   #131
Brink

64-bit Windows 10 Pro
 
 

Perfect. I'm happy to hear that it's working for you now.
My System SpecsSystem Spec
23 Aug 2012   #132
karanbawa

Windows 7 Ultimate x86
 
 
Ooops, failed

The feature is not working after everything i have tried. I think it doesn't works on Windows ultimate.
My System SpecsSystem Spec
23 Aug 2012   #133
Brink

64-bit Windows 10 Pro
 
 

Hello Karan, and welcome to Seven Forums.

It works for all editions and versions of Windows 7. Please double/triple check for any possible mistakes that may have been made while doing the steps exactly as is in the tutorial.
My System SpecsSystem Spec
.

21 Dec 2012   #134
JohnnyFootball

Windows 7 64 bit
 
 
Not authorized

Howdy, I did everything in the tutorial word-for-word but when i try to replace the old file with the new one, i get an error that says I am not authorized to copy to the en-US folder. Please Help!

***now its telling me that I can't copy the file because "the folder or file in it are in use by another program, please close the folder and try again" but nothing else is open. I have no clue what to do.
My System SpecsSystem Spec
21 Dec 2012   #135
Brink

64-bit Windows 10 Pro
 
 

Hello Johnny, and welcome to Seven Forums.

Are you logged in an administrator account?

Were you able to do step 14 to allow you to copy the file into the en-US folder?

Restarting the computer should clear anything that may be using it for you to be able to try again.

Hope this helps for now,
Shawn
My System SpecsSystem Spec
21 Dec 2012   #136
JohnnyFootball

Windows 7 64 bit
 
 

WOW, thanks for the quick response!

I was able to save the modified file under a new name [.exe(2)]. I then removed the default file from the folder, which allowed me to rename [.exe(2)] to plain old [.exe.] I used the command prompt, and restarted, but it still says welcome. I re-opened the new file with resource hacker just to make sure the modified file is the one in the folder (which it was) but still nothing.
My System SpecsSystem Spec
21 Dec 2012   #137
Brink

64-bit Windows 10 Pro
 
 

Sounds like a mistake may have been made somewhere, or some sort of permission issue. You might use the built-in Administrator account and start over from scratch to see if it may work afterwards.
My System SpecsSystem Spec
21 Dec 2012   #138
JohnnyFootball

Windows 7 64 bit
 
 

ok so it turns out i wasn't using the elevated command prompt. but after using it, i restarted the computer, but instead of welcome, or "Howdy" in my case, nothing appears. its blank.
My System SpecsSystem Spec
21 Dec 2012   #139
Brink

64-bit Windows 10 Pro
 
 

Ok, one oopsy down. Double check again to see if you may have made any more. It's not hard to do.

In addition, double check the blue NOTE box at the top of the tutorial to see if it may apply.
My System SpecsSystem Spec
Comment

 Welcome Log On Text Message - Change




Tutorial Tools




Similar help and support threads
Windows 7 Tutorial Category
change line of text in word so it's laid out 90 degrees to other text?
Is this possible? In word 2013 i am making a for sale poster and i want to put phone numbers at the botton from left to right and cut between them with scissors so people can pull off the number as you have i'm sure seen many times. But how can i rotate the numbers so the text is at a 90 degree...
Microsoft Office
Shutting down... Text Message - Change
How to Change the "Shutting down..." Text Message at Shut Down in Windows 7 and Vista This will show you how to change the Shutting down... text message you get after clicking on Shut Down in Windows 7 and Vista to any text message that you want it to say instead. You can only do this...
Tutorials
Logging off... Text Message - Change
How to Change "Logging off..." Text Message at Shut Down in Vista and Windows 7 This will show you how to change the Logging off... text message you get after clicking on Log off or Shut Down in Windows 7 and Vista to any text message that you want it to say instead. You can only do...
Tutorials
Report all downloads to text message
Does such a thing exist? This is a new family desktop, and one of our users (12 year old) has an issue downloading games and things. I can set the firewall to not allow him to download anything without admin password of course, but somebody in the house will tell him the password eventually. ...
System Security
Change Desktop Icon Text but NOT Start Menu Text
Hello, I am trying to make my parents computer a little bit easier to use, so I made the desktop icons bigger and the text bigger using the following tutorial: http://www.sevenforums.com/customization/8916-changing-font-icon-text.html but it makes the start menu text also quite large which...
Customization
Message for all text drivers...
Maxine comes up with some great ideas. Here's one for all those that TEXT while driving. So how fast do you want to meet your maker?
Chillout Room


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:34.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App