Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Slipstream Windows 7 SP1 into a Installation DVD or ISO File

27 Feb 2011   #90
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

I'll be looking for that when seeing if you reopen RT7 Lite and then seeing the iso written to a flash drive I have ready for it.

The size is noted when compared to the 3gb even seen for a previous iso with the .61gb difference. That suggests all went well.

One other thing to mention here is a lag seen when first going to run the program a day ago and now when trying to reopen it again. I'll have to update this after a full restart. But the RT7 Lite is still a beta.


My System SpecsSystem Spec
.
27 Feb 2011   #91
Loungefly

Windows 7 Home Premium
 
 

Thanks for the welcome and the quick reply Brink

I did what you said and checked at Step 7. Looks like it's fine. It's showing the SP1 and correct version number. I guess there's nothing to worry about.

Thanks for the help. Very much appreciated.
My System SpecsSystem Spec
27 Feb 2011   #92
Brink

64-bit Windows 10 Pro
 
 

You're most welcome.
My System SpecsSystem Spec
27 Feb 2011   #93
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

I made the edition selection and still checked off the intergrate SP box to move onto the next screen where the "skip" button was clicked on.The image here reveals how SP1 is now included in the iso itself.

Slipstream Windows 7 SP1 into a Installation DVD or ISO File-rt7lt-sp-option-skipped.jpg

One thing to note about using the flash drive option is you need a good 4gb flash drive free of any files before selecting that option. The RT Seven Lite lacks the option to reformat flash drives.

Update on that:

Apparently it's not going to allow the new iso to be written with two errors seen. The first is any partition is seen as using up the entire drive space with the insufficient drive space message. Once cleaned with DiskPart and "raw" it won't see the flash drive present.

The other options for selecting the iso itself were greyed suggesting the write to flash drive may have to be from the start.


My System SpecsSystem Spec
.

27 Feb 2011   #94
xxxdannyxxx

Windows 7 Home Premium x64 SP1
 
 

Quote   Quote: Originally Posted by Brink View Post
Quote   Quote: Originally Posted by xxxdannyxxx View Post
I created a new slipstreamed disk today and re installed and still have the backup files showing under disk cleanup.Anyone found out how to remove this yet or if its a bug with the RT7.

p.s Cant manually find these files though

Danny
Hello Danny,

Sorry, but as far as I know the Windows SP1 backup files cannot be removed when installed using a slipstream Windows 7 SP1.
Hi Shaun

Thanks for that. Im still trying to get my head around it though.They show on my system as 920Mb, But a clean install with the slipstreamed disk is around the same size on the Hdd as a clean install without the Sp1,and definatelly not nearly a gig larger.
Also where the hell are they.I cant find them anywhere.
Also if the backup files are there why cant you uninstall sp1 after a slipstreamed install.
Rant over lol !!!
I remember doing this with vista and never having any backup files installed.Maybe its a glitch with the Beta Rt7 and maybe fixed in future releases as you would expect them to be removed before the ISO is created.

Thanks though

Danny
My System SpecsSystem Spec
27 Feb 2011   #95
Brink

64-bit Windows 10 Pro
 
 

Hello Danny,

I'm thinking that it may be a glitch as well. I had word that a newer version of RT Seven Lite will be released sometime before long, so we shall see then hopefully.
My System SpecsSystem Spec
27 Feb 2011   #96
Brink

64-bit Windows 10 Pro
 
 

Hello Steven,

Answers inline.


Quote   Quote: Originally Posted by Night Hawk View Post
One thing to note about using the flash drive option is you need a good 4gb flash drive free of any files before selecting that option. The RT Seven Lite lacks the option to reformat flash drives.
The USB flash drive will need to have enough total space available (empty or full) for the image to be burned/extracted to it. RT Seven Lite will format (step 16E) the drive before doing so though.
Quote:
Apparently it's not going to allow the new iso to be written with two errors seen. The first is any partition is seen as using up the entire drive space with the insufficient drive space message. Once cleaned with DiskPart and "raw" it won't see the flash drive present.
Yep, The USB drive cannot be RAW, or it will not be seen just like any HDD and Windows 7. If it's RAW you must format it first to create a partition/volume on it before it is recognized.
Quote:
The other options for selecting the iso itself were greyed suggesting the write to flash drive may have to be from the start.
Yep, if you want to change a option like that, you will have to close and reopen RT Seven Lite to start over.
Hope this helps,
Shawn
My System SpecsSystem Spec
27 Feb 2011   #97
xxxdannyxxx

Windows 7 Home Premium x64 SP1
 
 

Quote   Quote: Originally Posted by Brink View Post
Hello Danny,

I'm thinking that it may be a glitch as well. I had word that a newer version of RT Seven Lite will be released sometime before long, so we shall see then hopefully.
Thanks Shaun thats good news
My System SpecsSystem Spec
27 Feb 2011   #98
David Ben Yosef

Windows 7 Ultimate SP1 x64 RTM
 
 

Has anyone used the WAIK to integrate SP1 into Windows 7 yet? I prefer that method, because there's no third party software involved/required. I could write up a tut if needed, Shawn?
My System SpecsSystem Spec
27 Feb 2011   #99
Brink

64-bit Windows 10 Pro
 
 

Hello David,

If you would like to write up a nice detailed tutorial for it, then that would be fine if it's easy to follow for even a noobie.

It's just that this 3rd party program makes it much easier to do this with many options that are also easier to do. That's all.
My System SpecsSystem Spec
Reply

 Slipstream Windows 7 SP1 into a Installation DVD or ISO File




Thread Tools




Similar help and support threads
Thread Forum
SATA Drivers - Slipstream into Windows XP CD
How to slipstream SATA drivers into Windows XP setup CD, on your dual boot PC with Windows 7 or Vista When you install Win XP, setup can not find your Hard Drive. 1) Download & Install nLite
Tutorials
Slipstream fixes into Windows 7 SP1
Hi there since at the moment there doesn't seem any inclination for Ms to provide an SP2 for W7 - are there any decent ways to download manually (Not Install) all the updates to W7 from after SP1 to current and then slipstream these into an SP1 install set (either DVD or USB). It was easy with...
Installation & Setup
Slipstream updates into Windows 7 AIO ISO
Hi, I was wondering if it would be possible to slipstream SP1 plus post-SP1 updates into an All in one Windows 7 ISO that includes all editions of Windows 7 x64 and x86 architectures. I appreciate any help :)
Installation & Setup
SATA driver for Windows XP Slipstream
I would like to try installing a dual boot of Windows XP Professional x86 with Windows 7 Professional x64 on a single hard drive. I gave up last time but decided to try one last time. My question is about the SATA driver for my Seagate Barracuda HD. Now, the XP Professional x86 I am going...
Installation & Setup
To slipstream my upcoming Repair Install (or not to slipstream . . .)
Hi, I have experienced the SP1 install failure because not only had I been using Driver Sweeper, and Driver Cleaner.net before that. Even worse, I have switched between NVidia and ATI graphics cards two or three times, back and forth. Currently have an Nvidia card, so no ATI needed, other than...
Installation & Setup
Slipstream windows 7 - Any clues ?
Dear Friends I am new to this forum , I would like to know if there are any tools that can be used to slipstream windows 7. The windows 7 consumes around 8 to 10gb in full installation and i am unable to create a test environment because it takes around 45 minutes for a fresh installation. Plz...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:09.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App