Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Slipstream Windows 7 SP1 into a Installation DVD or ISO File

22 Feb 2011   #40
Tarka Dal

Stools
 
 

Quote   Quote: Originally Posted by Lost Colonist View Post
Hm, this didn't work for me. I installed RT Seven lite, realized that I had chosen the wrong version by mistake and went to remove it. First problem was that it did not register as being installed and I could not install over the top of it with SP1 version. I ended up restoring a system image to get rid of the program.

Once everything was rebooted, I installed the SP1 version of Rt Seven Lite. It got to the SP1 addition stage. The thing took TWO hours to complete 32% of 'preparing'. Needles to say I gave up and hard rebooted, and re re instated the latest system image to get rid of the program and traces of the procedure.

I am not best pleased by this program and will most likely now just burn the SP1 ISO to a DVD. But for this install, I'll just install it via Window's Update.


Ok I think you have chosen the wrong version of RT lite. If you have a x32bit computer choose the x86 version near the bottom of the page or click this :- http://www.pub.rt7lite.com/7lite-rc-beta-1726-dec6-10-stable/rt_7_lite_win7_Vista_x86_sp1.exe. If you have the x64bit computer then choose the x64 version at the bottom of the page or click this :- http://www.pub.rt7lite.com/7lite-rc-...ta_x64_sp1.exe. Take it slow and try to understand what is going on with RT Seven Lite.


My System SpecsSystem Spec
.
22 Feb 2011   #41
iseeuu

 
 

Last year I created an install DVD that would allow me to choose which edition of 7, and x32 or x64, to install. After reading the instructions, it appears the utility only updates one edition of 7 (the one ticked) and either the x32 or the x64.

So for example the tutorial used the Ultimate Edition of 7 x64. Is it possible then to installed the Pro
Edition of 7 off of the DVD or ISO with the SP1 updates?
My System SpecsSystem Spec
22 Feb 2011   #42
Fayla

Windows 7 Professional 64 Bit SP1
 
 

I chose the x64 version.

Yes I followed all of the steps up to the SP1 patch, I chose the extracted X64 version from the ISO. Then it just stuck at 'preparing'.

Quote   Quote: Originally Posted by Runckle View Post
Quote   Quote: Originally Posted by Lost Colonist View Post
Hm, this didn't work for me. I installed RT Seven lite, realized that I had chosen the wrong version by mistake and went to remove it. First problem was that it did not register as being installed and I could not install over the top of it with SP1 version. I ended up restoring a system image to get rid of the program.

Once everything was rebooted, I installed the SP1 version of Rt Seven Lite. It got to the SP1 addition stage. The thing took TWO hours to complete 32% of 'preparing'. Needles to say I gave up and hard rebooted, and re re instated the latest system image to get rid of the program and traces of the procedure.

I am not best pleased by this program and will most likely now just burn the SP1 ISO to a DVD. But for this install, I'll just install it via Window's Update.


Ok I think you have chosen the wrong version of RT lite. If you have a x32bit computer choose the x86 version near the bottom of the page or click this :- http://www.pub.rt7lite.com/7lite-rc-beta-1726-dec6-10-stable/rt_7_lite_win7_Vista_x86_sp1.exe. If you have the x64bit computer then choose the x64 version at the bottom of the page or click this :- http://www.pub.rt7lite.com/7lite-rc-...ta_x64_sp1.exe. Take it slow and try to understand what is going on with RT Seven Lite.
My System SpecsSystem Spec
23 Feb 2011   #43
Brink

64-bit Windows 10 Pro
 
 

Hello Lost Colonist,

Answers inline.


Quote   Quote: Originally Posted by Lost Colonist View Post
Hm, this didn't work for me. I installed RT Seven lite, realized that I had chosen the wrong version by mistake and went to remove it. First problem was that it did not register as being installed and I could not install over the top of it with SP1 version. I ended up restoring a system image to get rid of the program.

Once everything was rebooted, I installed the SP1 version of Rt Seven Lite. It got to the SP1 addition stage. The thing took TWO hours to complete 32% of 'preparing'. Needles to say I gave up and hard rebooted, and re re instated the latest system image to get rid of the program and traces of the procedure.

I am not best pleased by this program and will most likely now just burn the SP1 ISO to a DVD. But for this install, I'll just install it via Window's Update.
Correct, the RC 1.7.0 build does not include the SP1 Slipstream option. Only the Beta 2.6.0 build does.
Ooops.

You should have had a RT 7 Lite (64-bit) uninstall entry in Programs and Features to uninstall the program with. Is this what you say was not there?

Did you change the Set priority setting to High first in step 4B to help speed the slipstreaming process up some. The slipstreaming process will take a while to complete, and could take longer on systems that are not real fast or if you had the priority level set to the default Normal.



Quote   Quote: Originally Posted by Lost Colonist View Post
I chose the x64 version.

Yes I followed all of the steps up to the SP1 patch, I chose the extracted X64 version from the ISO. Then it just stuck at 'preparing'.
Did you have anything else running that may have interfered with this?

You might start from scratch and start over with nothing else running using the High priority to see if that may help.

Hope this helps for now,
Shawn
My System SpecsSystem Spec
.

23 Feb 2011   #44
Brink

64-bit Windows 10 Pro
 
 

Quote   Quote: Originally Posted by iseeuu View Post
Last year I created an install DVD that would allow me to choose which edition of 7, and x32 or x64, to install. After reading the instructions, it appears the utility only updates one edition of 7 (the one ticked) and either the x32 or the x64.

So for example the tutorial used the Ultimate Edition of 7 x64. Is it possible then to installed the Pro
Edition of 7 off of the DVD or ISO with the SP1 updates?
Hello Robert,

I was able to select a different Windows 7 edition at step 6 than what the Windows 7 ISO was for to create a slipstream of the selected Windows 7 edition instead.
My System SpecsSystem Spec
23 Feb 2011   #45
Tarka Dal

Stools
 
 

Slipstreamed Ultimate Retail, Ultimate Student, Professional Student. All works fine...
My System SpecsSystem Spec
23 Feb 2011   #46
Brink

64-bit Windows 10 Pro
 
 

Thank you for confirming Runckle.
My System SpecsSystem Spec
23 Feb 2011   #47
Tarka Dal

Stools
 
 

Quote   Quote: Originally Posted by Brink View Post
Thank you for confirming Runckle.

Your welcome Shawn...
My System SpecsSystem Spec
23 Feb 2011   #48
drifking8887

windows 7
 
 

Quote   Quote: Originally Posted by Brink View Post
Hello Drifking,

At what step do you get this error?
Brink: i found the error
bcoz of yhe kaspersky
thanks for trying to help me!
My System SpecsSystem Spec
23 Feb 2011   #49
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Are you still getting those mysterious backup files?
My System SpecsSystem Spec
Reply

 Slipstream Windows 7 SP1 into a Installation DVD or ISO File




Thread Tools




Similar help and support threads
Thread Forum
SATA Drivers - Slipstream into Windows XP CD
How to slipstream SATA drivers into Windows XP setup CD, on your dual boot PC with Windows 7 or Vista When you install Win XP, setup can not find your Hard Drive. 1) Download & Install nLite
Tutorials
Slipstream fixes into Windows 7 SP1
Hi there since at the moment there doesn't seem any inclination for Ms to provide an SP2 for W7 - are there any decent ways to download manually (Not Install) all the updates to W7 from after SP1 to current and then slipstream these into an SP1 install set (either DVD or USB). It was easy with...
Installation & Setup
Slipstream updates into Windows 7 AIO ISO
Hi, I was wondering if it would be possible to slipstream SP1 plus post-SP1 updates into an All in one Windows 7 ISO that includes all editions of Windows 7 x64 and x86 architectures. I appreciate any help :)
Installation & Setup
SATA driver for Windows XP Slipstream
I would like to try installing a dual boot of Windows XP Professional x86 with Windows 7 Professional x64 on a single hard drive. I gave up last time but decided to try one last time. My question is about the SATA driver for my Seagate Barracuda HD. Now, the XP Professional x86 I am going...
Installation & Setup
To slipstream my upcoming Repair Install (or not to slipstream . . .)
Hi, I have experienced the SP1 install failure because not only had I been using Driver Sweeper, and Driver Cleaner.net before that. Even worse, I have switched between NVidia and ATI graphics cards two or three times, back and forth. Currently have an Nvidia card, so no ATI needed, other than...
Installation & Setup
Slipstream windows 7 - Any clues ?
Dear Friends I am new to this forum , I would like to know if there are any tools that can be used to slipstream windows 7. The windows 7 consumes around 8 to 10gb in full installation and i am unable to create a test environment because it takes around 45 minutes for a fresh installation. Plz...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 21:00.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App