Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Slipstream Windows 7 SP1 into a Installation DVD or ISO File

31 May 2012   #500
Pareto Optimal

Windows 7 Ultimate x86
 
 

I wanted to slipstream SP1 into ALL version of 7 32-bit and then creat an AIO with all versions of 32-bit with SP1 and all versions of 7 64-bit and then add a folder of other apps.


My System SpecsSystem Spec
31 May 2012   #501
Brink

64-bit Windows 10 Pro
 
 

It depends on the Windows 7 you downloaded. It may have only inlcuded that specific edition and not the others.

You can give the method in the link below a try to see if it may work for you. If not then try doing the tutorial again, but with a ISO from Digital River instead.

How to create an all-in-one Windows 7 install disk | TechRepublic
My System SpecsSystem Spec
31 May 2012   #502
Pareto Optimal

Windows 7 Ultimate x86
 
 

The 7 I DL'ed long ago had the correct hash marks as genuine from MS. It's efi file makes it Ultimate. I followed the tutorial's instructions and chose Ultimate as the type to inject SP1 into. Do I have to remove or edit the efi file to allow 7lite to allow me to choose all versions?
My System SpecsSystem Spec
31 May 2012   #503
Pareto Optimal

Windows 7 Ultimate x86
 
 

I just noticed an error in the tutorial.
................................
10. Do either step 11 or 12 below for what you want to do.
I only want to slipstream SP1 without updates because on all the sites I've checked, I'm not sure which posted updates came AFTER SP1.
................................
Step 11 is for slipstreaming SP1 only without updates.
Step 12 is for slipstreaming SP1 AND updates.
................................
Step 11 does NOT allow creating an AIO with ONLY SP1.
Step 11. B) Go to step 13. should say Goto Step 12. F)
Step 12. F) Do either step 12G or 12H for what type of Slipstream Windows 7 SP1 you want.
................................
12. G) instructs how to create a SINGLE edition of 7 with SP1 slipstreamed.
12. H) instructs how to make an AIO.
................................
Nevertheless, the instructions I followed in 11. B) should have created an image which it did. However, the image is empty.
My System SpecsSystem Spec
.

31 May 2012   #504
Brink

64-bit Windows 10 Pro
 
 

Pareto,

I must admit that I'm not sure what may have went wrong and why the ISO you created is empty unless some sort of mistake was made or there is an issue with you used to create it with.
My System SpecsSystem Spec
31 May 2012   #505
Pareto Optimal

Windows 7 Ultimate x86
 
 

I tried again with a different 7 Ultimate DVD.
At 30-something percent, I get a message that Service Pack not integrated successfully.
I had the files from the DVD and the SP1 in their own subfolders in a folder named W7 slipstreaming folder on my desktop. So, I put the DVD files folder on the desktop by itself and the SP1 EXE file on the desktop by itself, not in a folder. I tried THREE more times but got the same "Service Pack not integrated successfully" message.

Note when I start the program, the sponsors page is blank and I get a message stating that a script on the page failed ... would I like to continue running scripts on this page or not. I"ve clicked to continue to run and to NOT continue to run scripts on this page but that window remains blank. I have to close it and then the program contiues to run.

I could download an image with SP1 slipstreamed into only that ONE edition but I want a disc with all flavors of 7 with SP1 in each flavor.

Thanks
My System SpecsSystem Spec
31 May 2012   #506
Brink

64-bit Windows 10 Pro
 
 

You might give the method in the link below a try to see if it may work for you.

How to create an all-in-one Windows 7 install disk | TechRepublic
My System SpecsSystem Spec
31 May 2012   #507
Pareto Optimal

Windows 7 Ultimate x86
 
 

Yes, I've seen that but it doesn't slipstream SP1.
I've read other pages on using WAIK.
I know I could just create a disc with an altered EFI file so I'm allowed to choose which 7 version to install and include a folder with SP1 to run seperately AFTER installing 7.

I wanted to have a disc with SP1 slipstreamed into every version of 7, 32-bit with SP1 slipstreamed into each version AND every version of 7, 64-bit without SP1.

If I DL 7-Ultimate with SP1 ALREADY slipstreamed into it, can I use that to make a USB drive to install ONLY Ultimate with SP1 or any 7 with SP1?

What is the benefit of that AIO program other than it allows you to combine x86 and x64?
It otherwise seems to do the same thing that simply altering the ef.cgi file does.
What am I missing?
My System SpecsSystem Spec
01 Aug 2012   #508
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hiyya Shawn a bit OT but I want to slipstream a XP with it's service packs will 7 lite do this? or I have a ref from Lifehacker to use nLite is this the same principle is what I need to know please.
Plus I does it matter what machine you do this on? even with 7 as I recently could have done this with a machine I sent to my brother in the UK using my faster main machine.
My System SpecsSystem Spec
01 Aug 2012   #509
Brink

64-bit Windows 10 Pro
 
 

Hello John,

RT Seven Lite doesn't list XP as being supported. I would recommend to use nLite as well to slipstream XP.
My System SpecsSystem Spec
Comment

 Slipstream Windows 7 SP1 into a Installation DVD or ISO File




Tutorial Tools




Similar help and support threads
Windows 7 Tutorial Category
SATA Drivers - Slipstream into Windows XP CD
How to slipstream SATA drivers into Windows XP setup CD, on your dual boot PC with Windows 7 or Vista When you install Win XP, setup can not find your Hard Drive. 1) Download & Install nLite
Tutorials
Slipstream fixes into Windows 7 SP1
Hi there since at the moment there doesn't seem any inclination for Ms to provide an SP2 for W7 - are there any decent ways to download manually (Not Install) all the updates to W7 from after SP1 to current and then slipstream these into an SP1 install set (either DVD or USB). It was easy with...
Installation & Setup
Slipstream updates into Windows 7 AIO ISO
Hi, I was wondering if it would be possible to slipstream SP1 plus post-SP1 updates into an All in one Windows 7 ISO that includes all editions of Windows 7 x64 and x86 architectures. I appreciate any help :)
Installation & Setup
SATA driver for Windows XP Slipstream
I would like to try installing a dual boot of Windows XP Professional x86 with Windows 7 Professional x64 on a single hard drive. I gave up last time but decided to try one last time. My question is about the SATA driver for my Seagate Barracuda HD. Now, the XP Professional x86 I am going...
Installation & Setup
To slipstream my upcoming Repair Install (or not to slipstream . . .)
Hi, I have experienced the SP1 install failure because not only had I been using Driver Sweeper, and Driver Cleaner.net before that. Even worse, I have switched between NVidia and ATI graphics cards two or three times, back and forth. Currently have an Nvidia card, so no ATI needed, other than...
Installation & Setup
Slipstream windows 7 - Any clues ?
Dear Friends I am new to this forum , I would like to know if there are any tools that can be used to slipstream windows 7. The windows 7 consumes around 8 to 10gb in full installation and i am unable to create a test environment because it takes around 45 minutes for a fresh installation. Plz...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App