Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Bootmgr - Move to C:\ with EasyBCD

28 Dec 2014   #110
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

You state this in your post #104

Quote:
Reinstalling Windows is not an option
Why is that not a option.
It is the proper way to do the install after changing the cpu and motherboard.

Why would one expect the the old motherboard bios, cpu, and driver specs to work with a new cpu and motherboard bios?

Have you been changing Boot Advanced options in msconfig?


My System SpecsSystem Spec
.
28 Dec 2014   #111
Vangelas

Win7 64 Pro
 
 

Yes, I do have the drivers on auto-update, thanks. I have a problem getting EasyBCD to work and was looking for some tips.
Reinstalling Windows is not an option due to all the installed programs (many giveaways) which would not reinstall. As mentioned, the Advanced Boot options are not available at all.
My System SpecsSystem Spec
28 Dec 2014   #112
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

You do not want to change setting here. No check marks.
It should look like mine.

Bootmgr - Move to C:\ with EasyBCD-capture.pngtoday-only.png


My System SpecsSystem Spec
28 Dec 2014   #113
Vangelas

Win7 64 Pro
 
 

Those are the settings (Layback Bear's pic) I cannot access; from what I have read, it is due to Windows msconfig looking to the first partition (100MB) for the files to access the settings, instead of looking at the C: partition. I believe I need to change those settings due to the CPU change (or, perhaps if I fixed the bootmgr problem, the settings would probably adjust automatically).
My System SpecsSystem Spec
.

28 Dec 2014   #114
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Unless you have changed those setting before they should be proper.
Those setting have nothing to do with your reserve 100mb partition.

As far as I can tell you are not following any instruction or suggestions that we give you so I will be going.

Luck to you.
My System SpecsSystem Spec
28 Dec 2014   #115
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

What mobo did you change from and to? I believe you said you did not do a clean install at that time.

Please open an elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, notice the space between the sfc and the /. It is a system file checker which will scan your system files and attempt to correct any missing or corrupt files. What we want are the results to say windows found no integrity violations. If it says files were found but could not be repaired, close the box, reboot and run it again, after opening the administrative command prompt. You may have to reboot and run it three times for it to repair all system files. If it can't repair them after 3 reboots, let us know.

Please also answer the questions about the motherboard. It is important. Please run and upload the
Blue Screen of Death (BSOD) Posting Instructions
and upload the unedited results here.

The 100MB System Reserved has nothing to do with msconfig. That is not your problem. Also, you do not have 8 cores, you have 4 cores and 8 threads. A thread is not a core and some programs read them as a core and some only read the actual cores.

Please download CPUz CPU-Z CPUID - System & hardware benchmark, monitoring, reporting and post screenshots of the CPU, Mainboard, Memore and SPD tabs. The SPD tabs will select eash Dimm slot from a dropdown box in the upper left portion of the screen, please only post the Dimm Slots populated with Ram.
My System SpecsSystem Spec
29 Dec 2014   #116
rvcjew

7 Pro x64, 10 Pro x64
 
 

Quote   Quote: Originally Posted by Vangelas View Post
Task manager shows 4 cores instead of 8; utilities like dbpoweramp only show 4 cores when converting files instead of 8, etc. The settings in msconfig are not available at all; I should be able to adjust the number of cores there. From what I have read, this is due to Windows looking at the first partition (100MB) instead of the C: partition.
Nothing was done to adjust the image to the new hardware. All Windows updates are set for automatic.
If this is about you i7 3770 then it is a 4 core, 8 thread cpu and will never be more than 4 cores. Intel® Coreā

Edit: essenbe beat me to it.
My System SpecsSystem Spec
30 Dec 2014   #117
Vangelas

Win7 64 Pro
 
 

sfc /scannow returns no integrity violations. The old mobo was ASUS P8 Z68-V PRO GEN3. The new mobo is ASUS P8 Z77 WS.I had dbpoweramp on an i7 at work and it definitely uses 8 threads when available.Here it still only uses 4 threads. I am posting the CPU-Z shots.

I am still wondering if anyone can help with my original question about the problem I have running EasyBCD.Thanks. In a separate post I will send the MS Win7 forum entries which prompted the question anonut msconfig.


Attached Images
Bootmgr - Move to C:\ with EasyBCD-cpu-z-cpu.jpg Bootmgr - Move to C:\ with EasyBCD-cpu-z-mainboard.jpg Bootmgr - Move to C:\ with EasyBCD-cpu-z-memory.jpg Bootmgr - Move to C:\ with EasyBCD-cpu-z-spd-1.jpg Bootmgr - Move to C:\ with EasyBCD-cpu-z-spd-2.jpg Bootmgr - Move to C:\ with EasyBCD-cpu-z-spd-3.jpg Bootmgr - Move to C:\ with EasyBCD-cpu-z-spd-4.jpg 
My System SpecsSystem Spec
30 Dec 2014   #118
Vangelas

Win7 64 Pro
 
 

A lot of people seem to have the problem where advanced boot options are not available in msconfig, and it always seems to relate to the boot partition; frequently seems to involve the 100MB partition.

The following may be wrong, and this is not the solution for me, but this is what prompted some of my questions :
In the MS Win7 Forums I read:
Question: "MSCONFIG will not let me check any of the boxes or enter "advanced options..." under the boot tab. I am the administrator and I have full ownership and permission of all files in the computer including the msconfig.exe"

Answer: "Hmm, I think I may have tracked down a clue. The system booted initially from the boot loader on the HFS+ volume, then handed off booting to the NTFS drive (I noticed I had the wrong boot drive selected, so I just picked the NTFS drive in the loader to boot Windows). So the BIOS may have tagged that as Disk 0 to the system. When Windows booted, it saw that it was booted from Disk 1, and msconfig/bcdedit is still looking for Disk 0 (the drive it would assume the system started up from), which isn't even a formatted drive."

...
"Yep, sure enough, msconfig works properly when boot-loaded from the BIOS (as disk 0), not from another loader. I'd classify that as a bug for sure, but a workaround would be to boot directly from the Windows drive - instead of, say, a dual-drive dual-boot setup. "
...
"IT worked!! I set the system reserved partition [disk 0] to the active partition in disk management and restarted, all things work fine. i can now access all portions of msconfig."
My System SpecsSystem Spec
30 Dec 2014   #119
gregrocker

 

Where was the Active flag?

System Reserved should have been marked Active anyway, or Win7 normally would not boot unless you'd previously moved the System boot files to C.

Please post back a screenshot of Disk Management - Post a Screen Capture Image
My System SpecsSystem Spec
Comment

 Bootmgr - Move to C:\ with EasyBCD




Tutorial Tools Search this Tutorial
Search this Tutorial:

Advanced Search




Similar help and support threads
Windows 7 Tutorial Category
Need to move MBR, running into Bootmgr missing error
I have what I hope is a nice clean Windows 7 install on a fairly new hard drive (C:) from earlier this year. But I recently determined that the MasterBootRec is still on a tiny old otherwise empty hard drive (Q:)I need to remove. I tried following these instructions to move the MBR; I made my...
General Discussion
I ruined my OS' BCD by using EasyBCD
Hello all. So I tried to fix a game by attempting to increase my UserVA. After looking around I tried EasyBCD. It made no sense for me and I tried random stuff and then shut it down. The next day my computer cannot startup and I get the error "The Windows Boot Configuration Data file does not...
Backup and Restore
EasyBCD 2.0.1 Released!
July 13, 2010 EasyBCD 2.0.1 is available. Changelog (for 2.0 and 2.0.1) and download link is below. EasyBCD is NeoSmart Technologies' multiple award-winning answer to taking control of your bootloader. EasyBCD extends and revamps the Windows Vista/Windows 7 BCD bootloader, and with...
Software
New EasyBCD 2.0, Build 77 out..
The new beta seems to deal better with the System Reserved 100 mb partition.
Software
Easybcd dual Win 7
Hi. I have 2 partitions. Each with win 7. I made a mistake in easybcd by deleting and entry, and now I cannot dualboot. Easybcd only shows me vista/longhorn. How can I get the second win 7 back? Regards, adabo
Software
EasyBCD
Hello all....:) So in anticipation of Windows 7 (pre beta) bombing and having to burn everything to the ground and start over and reinstall Vista from the ground up, all I had to do was this (from within Vista) with EasyBCD? And now all is right again in Bare foot Kid land? Now when I need to I...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 01:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App